7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. D DIMENSIONING AND TOLERANCING PER ASME Y14.5M-2009 ATLANTIC VERSION TERMINATOR INTERFACE ADAPTER CRIMP WIRE INSUL REVISION A FINE CRIMP HEIGHT ADJUST SERVO LATCH PLATE - 2150311 -6 A NON-CRIMP HEIGHT ADJUST SERVO LATCH PLATE 11 2150311 -7 A FINE CRIMP HEIGHT ADJUST 7- 2150311 -7 A CRIMP TOOLING KIT n - WIRE SIZE 1.00mm2 0.75mm2 0.50mm2 B 25697.126.009 25697.126.142 25697.126.178 W1__DWG_WGAUGE_2 W1__DWG_WGAUGE_3 - - - 8- 2150311 -4 - - - 2119641-1 - 2063440-2 - - - 2119951-1 1901697-1 - - 8- 2150311 -5 - - 2168400-7 (QUANTITY 2) SMART APPLICATOR 2161326-1 PNEUMATIC FEED 2119950-1 2119792-2 - - - - NONE - - - - - - - - - - - - - - - 4 - - - C1__DWG_PN_2_0 TE TERMINAL C1__DWG_PN_2_1 C1__DWG_PN_2_2 C1__DWG_PN_2_3 2113314-4 2113314-5 C1__DWG_PN_3_1 C1__DWG_PN_3_2 2113314-6 1.49+/-0.05 [.059+/-.002] 1.39+/-0.05 [.055+/-.002] 1.29+/-0.05 [.051+/-.002] 1 RECOMMENDED SPARE PARTS 2 GREASE BEARING SURFACES LIGHTLY C1__DWG_PN_3_0 C1__DWG_PN_3_3 LEAR TERMINAL - - - - - - - - - C1__DWG_PN_4_1 C1__DWG_PN_4_2 25697.213.178 CRIMP HEIGHT REFERENCE SETTING C1__DWG_PN_4_3 9 7.8 W1__DWG_CRIMP_HT_1 W1__FA_SETTING_1 8.8 W1__DWG_CRIMP_HT_2 W1__DWG_CRIMP_HT_3 C1__DWG_PN_4_0 25697.213.009 25697.213.141 W1__FA_SETTING_2 10.0 W1__FA_SETTING_3 3. LUBRICATE DAILY PER THE APPLICATOR INSTRUCTION SHEET SUPPLIED WITH THE APPLICATOR. 4 APPLICATOR SPECIFIC DATA TO BE ENTERED INTO BLANK MEMORY CHIP AT ASSEMBLY. SEE BELOW FOR PART NUMBER: PNEUMATIC FEED WITH "SMART APPLICATOR" CONVERSION: 8SERVO FEED WITH "FINE CRIMP HEIGHT ADJUST": 8SERVO FEED WITH "NON-CRIMP HEIGHT ADJUST": 8- 2150311 -4 2150311 -5 2150311 -6 5. ADJUSTMENT OF THE STRIPPER MAY BE REQUIRED WHEN MOVING THE APPLICATOR BETWEEN BENCH AND LEADMAKER APPLICATIONS. 6 APPLY PART NUMBER 1-23419-5 LOCTITE TO THREADS OF ITEMS 62, 180 FOR -6 ONLY APPLY PART NUMBER 1-23419-5 LOCTITE TO THREADS OF ITEMS 37, 7 GREASE THREADS, GROOVE AND O-RING ON ITEMS 35 & 252. 8 MAGNET, ITEM 166 MUST BE ORIENTED CORRECTLY IN ORDER TO PROPERLY ACTUATE THE COUNTER. 9 CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. 10 11 TERMINAL PITCH NOT COMPATIBLE WITH MECHANICAL FEED WHEN ASSEMBLING -6 NON-CRIMP HEIGHT ADJUST APPLICATOR USE SHIM PACK 2119957-2 TO ALIGN APPLICATOR'S MAXIMUM WIRE CRIMP HEIGHT AT NORMAL TERMINATOR SHUT HEIGHT & 242. 180 & 242. *WARNING ON INSTALLATION, SET WIRE DISC, ITEM 40 TO LARGEST WIRE SIZE SETTING. USE OF SETTINGS BELOW MINIMUM REQUIRED CRIMP HEIGHT SETTING WILL CAUSE DAMAGE TO CRIMP TOOLING. 1 1 1 1 - 1 - 1 - 1 - 1 1 -77 -7 -6 -5 -2 A 2119957-2 8-21084-0 2119640-1 APPLICATOR SHIM PACK O-RING, .676 ID, .070 DIA. MAT. PUSH ROD, AIR FEED PART NO DESCRIPTION 260 252 250 1 1 ITEM NO REVISIONS DIST 66 P LTR Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 DESCRIPTION DATE DWN APVD 1 DEVELOPMENT 22JAN2013 YY SX A RELEASED 22MAR2013 YY UG 1 1 1 2 1 1 3 1 4 2 2 2 2 1 1 1 1 1 1 1 1 1 8 2 2 1 2 1 2 1 1 1 4 1 1 1 1 1 1 1 1 1 1 2 1 1 4 2 2 2 2 1 1 1 1 1 8 2 2 1 2 1 2 1 1 1 4 1 1 1 1 1 1 1 1 1 1 2 1 1 3 1 4 2 2 2 2 1 1 1 1 1 1 1 1 1 8 2 2 1 2 1 2 1 1 1 4 1 1 1 1 1 1 1 1 1 1 2079988-1 2119641-1 2119798-1 1-22279-3 2119759-1 2119082-9 2079764-1 2119083-1 2168400-7 2119580-1 2063440-2 2119740-2 1901697-1 1976055-3 6-993111-6 8-22280-7 1752353-2 1901680-2 21045-3 994969-1 994970-2 240638-1 3-23627-7 SEE NOTE 4 1633743-1 455888-4 2119956-2 2-18032-2 2119740-1 2168078-1 1976052-1 2119793-1 992763-5 2079383-4 2063961-1 2168400-4 2168083-9 5018030-2 5018030-1 986965-8 1-5018030-0 2119792-2 18023-9 2119655-5 2119369-1 2079383-7 2119645-1 2119957-1 1-2119644-2 2119085-1 2119092-1 1-18028-2 2168083-9 1-2168083-0 240639-1 1320906-1 1752371-5 2-22281-3 1752373-4 1901696-3 1901695-3 1-2079383-1 1752360-1 240644-1 690482-3 1-1803001-3 1-2217206-4 7-240641-6 238009-1 2-1633961-3 1-455888-1 2-456405-5 2 1 1 3 1 4 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 8 2 2 1 2 1 2 1 1 1 4 1 1 1 1 1 1 1 1 1 1 -77 -7 -6 -5 -2 PART NO THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. DIMENSIONS: ATLANTIC VERSION AMP 4805 REV 31MAR2000 A - - - - 1 - - - - 1 - 1 - 1 1 - 1 - 1 1 - - 1 - - 1 1 1 1 - 1 1 1 1 - 1 1 1 1 - - 2 2 - - - - - - - - 1 - - 1 1 - - REF REF - 1 1 1 1 - 1 1 1 1 - 1 1 1 1 - 1 1 1 1 - 1 1 1 1 - - - - 2 - 1 1 1 1 - REF REF REF REF - - - - 1 - - - - 1 - - REF REF - - 1 1 - 1 1 1 1 - 1 1 1 1 - 2 2 2 2 - 2.92 mm MAX [0.115 IN MAX] - LOC 1 - INSULATION DIAMETER RANGE CRIMP HEIGHT mm [INCH] W1__DWG_WGAUGE_1 - 10 LEAR TERMINAL C1__DWG_PN_1_3 - TE CRIMP SPECIFICATION TE SPEC TERMINALS APPLIED 2114314-3 4 - F F TERMINAL C1__DWG_PN_1_2 SET UP GAUGE 2119599-2 TYPE LEAR TERMINAL C1__DWG_PN_1_1 2 PART NUMBERS REQUIRED - 2150311 -5 4.75-5.35 mm [.187-.211 IN] 2114314-1 2114314-2 CONVERT TO SERVO LATCH PLATE APPL INSTRUCTIONS 408-10390 C1__DWG_PN_1_0 FEED TYPE PNEUMATIC 3.56 mm [.140] TE TERMINAL DESCRIPTION FINE CRIMP HEIGHT ADJUST WIRE STRIP LENGTH C 3 APPLICATOR STYLE CONVERSION CHART A 2.03 mm [.080] TERMINAL APPLICATION SPECIFICATION 4 20 2150311 -2 SIZE TERMINAL NAME: 5 ALL RIGHTS RESERVED. PART NUMBER APPLICATOR DATA TERMINAL DATA: 6 mm & 4 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.5 0.13 0.013 0.0001 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 22JAN2013 CHK 22JAN2013 APVD 22JAN2013 Y.YIN G.BAILEY S.XI TE Connectivity Harrisburg, PA 17105-3608 NAME - APPLICATION SPEC - WEIGHT SIZE - A1 CAGE CODE 00779 CUSTOMER ACCESSIBLE PRODUCTION DRAWING SHEETS 3 ITEM NO DESCRIPTION PRODUCT SPEC - 249 248 247 246 245 244 243 242 240 239 238 213 183 180 177 176 175 174 172 166 164 163 137 135 133 82 71 70 67 66 65 63 62 60 58 57 56 55 54 53 52 51 49 46 44 41 40 39 38 37 35 33 31 29 27 25 24 22 20 19 18 17 13 11 9 8 7 6 5 4 3 2 1 BUSHING, LCH5-12, MISUMI FEED CAM, AIR FEED DETENT PIN SPRING, COMPRESSION RAM, AMP STYLE, END FEED, NON-ADJUST CAM, SNAIL, INSULATION ADJUSTMENT WASHER, WAVE SPRING, CREST-TO-CREST RETAINER, INSULATION DIAL SHCS, LOW HEAD, RoHS, M5 X 10 MECHANICAL FEED ASSEMBLY AIR FEED MODULE TAG,IDENTIFICATION FEED FINGER ASSEMBLY,EF STANDOFF, HOLD-DOWN PIN, SLOTTED SPRING 3.0 X 14.0 SPRING, COMPRESSION GUIDE PIN,HOLDDOWN GUIDE PIN,HOLDDOWN RING, RETAIN, EXTERN, 3/16 CRESCENT MAGNET, RARE EARTH HIGH ENERGY COUNTER, MAGNETIC SPRING, FEED FINGER PIN, RETAIN, GRVD, 3/16 X .854 MEMORY CHIP, PROGRAMMED SERVO FEED LATCH ASM SPACER, CRIMPER DOCUMENTATION PACKAGE SCR, SET, FLT POINT M3 X 10.0 TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS HOLDDOWN,TERMINAL LIMITER, ADJUSTMENT BOLT SCR, SET, SOC, CONE POINT, M3 x 4.0 SCR, BHSC, RoHS (M4 X 8) FEED FINGER SHCS, LOW HEAD, RoHS, M4 X 8 SCR, SKT HD CAP, RoHS, M4 X 20 NUT, HEX, REG, RoHS, M4 NUT, HEX, REG, RoHS, M3 NUT, LOCK, HEX, TORQUE (M4) NUT, HEX, REG, RoHS, M3.5 PAWL, EF, AIR SCR, SKT HD CAP M4 X 6.0 APPLICATOR BASIC ASSEMBLY, EF RAM,AMP STYLE, END FEED SCR, BHSC, RoHS (M8 X 25) DISC, NUMBERED FA WIRE ADJUSTMENT APPLICATOR SHIM PACK RAM WASHER, PRECISION FA HEAD, ATLANTIC STYLE BOLT, ADJUSTMENT WASHER, FLAT, REG M4 SCR, SKT HD CAP, RoHS, M4 X 20 SCR, SKT HD CAP, RoHS, M4 X 10 STRIPPER (MACHINING) STUD, THREADED PLATE, STRIP GUIDE SPRING, COMPRESSION DRAG STRIP GUIDE, REAR STRIP GUIDE, FRONT SCR, BHSC, RoHS (M6 X 12) SPACER,HOLD-DOWN PLATE, REAR SHEAR PLATE, FRONT SHEAR ANVIL, COMBINATION, END FEED BLADE, SLUG SPACER BLOCK, FL CRIMPER SPACER CRIMPER, INSULATION F PREMIUM SPACER, CRIMPER CRIMPER, WIRE PREMIUM Ocean End Feed Applicator - DRAWING NO 2150311 SCALE 1:1 RESTRICTED TO SHEET 1 OF - 4 & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION REV A D C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. 6 5 4 3 2 20 LOC REVISIONS DIST A ALL RIGHTS RESERVED. 1 66 P LTR DESCRIPTION SEE SHEET 1 - 6 DATE DWN APVD - - - 37 40 DIMENSIONING AND TOLERANCING PER ASME Y14.5M-2009 D 44 245 FEED TYPE 62 6 REF 38 D 39 247 260 REF 6 2 245 35 7 44 2 1 2 56 7 PNEUMATIC 2 244 243 180 252 7 16.76 [0.660] 246 2 5 166 242 8 177 238 249 250 63 2 A 82 1 C 137 1 163 2 3 C 172 1 51 2 4 41 70 176 54 175 2 2 55 174 20 52 10 65 164 6 57 A 180 33 2 19 18 67 SERVO LATCH PLATE 213 B 66 B CAM POSITION 30mm STROKE 29 248 33 27 8 1 46 60 31 13 9 1 11 1 17 53 33 25 22 SERVO FEEDER NOT INCLUDED A 24 4 133 135 183 240 REF 49 A A THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. 40mm STROKE AIR FEED AMP 4805 REV 31MAR2000 DIMENSIONS: ATLANTIC VERSION Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 mm & 4 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.5 0.13 0.013 0.0001 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 22JAN2013 CHK 22JAN2013 APVD 22JAN2013 Y.YIN G.BAILEY S.XI TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC - APPLICATION SPEC - - WEIGHT SIZE - A1 CAGE CODE 00779 CUSTOMER ACCESSIBLE PRODUCTION DRAWING SHEETS 3 Ocean End Feed Applicator - DRAWING NO 2150311 SCALE 1:1 RESTRICTED TO SHEET 2 OF & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION - 4 REV A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. D DIMENSIONING AND TOLERANCING PER ASME Y14.5M-2009 PACIFIC VERSION TERMINATOR INTERFACE ADAPTER CRIMP WIRE INSUL REVISION 2114314-3 WIRE SIZE 1.00mm2 0.75mm2 0.50mm2 B 8- 2150311 -4 - - - - - 2- 2150311 -7 A FINE CRIMP HEIGHT ADJUST 7- 2150311 -7 A CRIMP TOOLING KIT 2161326-1 - PNEUMATIC FEED 2119950-1 2119792-2 NONE - - - - - 4 - - 2119641-2 - - - - - 2168400-7 - (QUANTITY 2) - - - 1 - - - 1 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - - 2 - - - - - - 1 - - 1 - 4 4 4 - - REF - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - - - 2 - 1 1 1 - REF REF REF - - - 1 - 1 1 1 - - - 1 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - 1 1 1 - - - 1 - - REF - - 1 - 1 1 1 - 1 1 1 - 2 2 2 - - - 2063440-2 - - - - - - F F TE CRIMP SPECIFICATION n INSULATION DIAMETER RANGE 2.92 mm MAX [0.115 IN MAX] - - - - 10 C1__DWG_PN_2_0 TE TERMINAL C1__DWG_PN_2_1 C1__DWG_PN_2_2 C1__DWG_PN_2_3 2113314-4 2113314-5 C1__DWG_PN_3_1 C1__DWG_PN_3_2 2113314-6 C1__DWG_PN_3_3 1.39+/-0.05 [.055+/-.002] 1.29+/-0.05 [.051+/-.002] 1 RECOMMENDED SPARE PARTS 2 GREASE BEARING SURFACES LIGHTLY LEAR TERMINAL W1__DWG_CRIMP_HT_1 W1__DWG_CRIMP_HT_2 W1__DWG_CRIMP_HT_3 C1__DWG_PN_4_0 25697.213.009 25697.213.141 C1__DWG_PN_4_1 7.8 8.8 10.0 C1__DWG_PN_4_3 9 W1__FA_SETTING_1 W1__FA_SETTING_2 W1__FA_SETTING_3 3. LUBRICATE DAILY PER THE APPLICATOR INSTRUCTION SHEET SUPPLIED WITH THE APPLICATOR. 4 APPLICATOR SPECIFIC DATA TO BE ENTERED INTO BLANK MEMORY CHIP AT ASSEMBLY. SEE BELOW FOR PART NUMBER: PNEUMATIC FEED WITH "SMART APPLICATOR" CONVERSION: 8SERVO FEED WITH "FINE CRIMP HEIGHT ADJUST": 8- 2150311 -4 2150311 -5 *WARNING ON INSTALLATION, SET WIRE DISC, ITEM 40 TO LARGEST WIRE SIZE SETTING. USE OF SETTINGS BELOW MINIMUM REQUIRED CRIMP HEIGHT SETTING WILL CAUSE DAMAGE TO CRIMP TOOLING. 5. ADJUSTMENT OF THE STRIPPER MAY BE REQUIRED WHEN MOVING THE APPLICATOR BETWEEN BENCH AND LEADMAKER APPLICATIONS. 6 APPLY PART NUMBER 1-23419-5 LOCTITE TO THREADS OF ITEMS 62, 180 7 GREASE THREADS, GROOVE AND O-RING ON ITEMS 139 MAGNET, ITEM 166 MUST BE ORIENTED CORRECTLY IN ORDER TO PROPERLY ACTUATE THE COUNTER. 9 CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. 10 TERMINAL PITCH NOT COMPATIBLE WITH MECHANICAL FEED. & 242. & 153. 8 1 1 1 1 1 - 1 1 1 -77 -27 -25 -22 A 2119782-1 PART NO FINE ADJUST HEAD ASM, PACIFIC STYLE DESCRIPTION 251 1 ITEM NO Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 1 1 1 2 1 1 3 4 2 2 2 2 1 1 1 1 1 8 2 2 1 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 3 4 2 2 2 2 1 1 1 1 1 8 2 2 1 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 3 4 2 2 2 2 1 1 1 1 1 1 1 8 2 2 1 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 -77 -27 -25 -22 P LTR PART NO THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. DIMENSIONS: PACIFIC VERSION AMP 4805 REV 31MAR2000 66 2119640-1 2079988-1 1-22279-3 2119082-9 2079764-1 2119083-1 2168400-7 2119580-1 2063440-2 2119740-2 2079383-9 1901697-1 1976055-3 6-993111-6 8-22280-7 1752353-2 1901680-2 21045-3 994969-1 994970-2 240638-1 8-21084-1 2119641-2 2119798-2 2079383-8 2119655-6 2119651-1 2119092-2 3-23627-7 SEE NOTE 4 1633743-1 455888-4 2119956-2 2-18032-2 2119740-1 2168078-1 1976052-1 2119793-1 992763-5 2063961-1 2168400-4 2168083-9 5018030-2 5018030-1 986965-8 1-5018030-0 2119792-2 18023-9 2079383-7 2119645-1 2119957-1 2119644-2 1-18028-2 2168083-9 1-2168083-0 240639-1 1320906-1 1752371-5 2-22281-3 1752373-4 1901696-3 1901695-3 1752360-1 240644-1 690482-3 1-1803001-3 1-2217206-4 7-240641-6 238009-1 2-1633961-3 1-455888-1 2-456405-5 C1__DWG_PN_4_2 25697.213.178 CRIMP HEIGHT REFERENCE SETTING CRIMP HEIGHT mm [INCH] 1.49+/-0.05 [.059+/-.002] C1__DWG_PN_3_0 A REVISIONS DIST DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - - TYPE 25697.126.178 W1__DWG_WGAUGE_3 - - 25697.126.009 25697.126.142 W1__DWG_WGAUGE_2 - SERVO LATCH PLATE SMART APPLICATOR LOC - - FINE CRIMP HEIGHT ADJUST LEAR TERMINAL W1__DWG_WGAUGE_1 - A - C1__DWG_PN_1_3 - 2- 2150311 -5 TE SPEC C1__DWG_PN_1_2 - 8- 2150311 -5 TERMINAL C1__DWG_PN_1_1 SET UP GAUGE 2119599-2 1 PART NUMBERS REQUIRED 1901697-1 4.75-5.35 mm [.187-.211 IN] 2114314-1 2114314-2 CONVERT TO 2119951-1 LEAR TERMINAL C1__DWG_PN_1_0 FEED TYPE SERVO LATCH PLATE APPL INSTRUCTIONS 408-10390 TE TERMINAL DESCRIPTION PNEUMATIC 3.56 mm [.140] TERMINALS APPLIED 2 APPLICATOR STYLE CONVERSION CHART FINE CRIMP HEIGHT ADJUST WIRE STRIP LENGTH C 3 20 A 2.03 mm [.080] TERMINAL APPLICATION SPECIFICATION 4 2- 2150311 -2 SIZE TERMINAL NAME: 5 ALL RIGHTS RESERVED. PART NUMBER APPLICATOR DATA TERMINAL DATA: 6 mm & 2 of 4) MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.5 0.13 0.013 0.0001 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 22JAN2013 CHK 22JAN2013 APVD 22JAN2013 Y.YIN G.BAILEY S.XI TE Connectivity Harrisburg, PA 17105-3608 NAME - APPLICATION SPEC - WEIGHT SIZE - A1 CAGE CODE 00779 CUSTOMER ACCESSIBLE PRODUCTION DRAWING SHEETS 1 ITEM NO DESCRIPTION PRODUCT SPEC - 250 249 246 244 243 242 240 239 238 213 186 183 180 177 176 175 174 172 166 164 163 153 152 145 144 141 140 139 137 135 133 82 71 70 67 66 65 63 62 58 57 56 55 54 53 52 51 49 41 40 39 38 33 31 29 27 25 24 22 20 19 18 13 11 9 8 7 6 5 4 3 2 1 PUSH ROD, AIR FEED BUSHING, LCH5-12, MISUMI SPRING, COMPRESSION CAM, SNAIL, INSULATION ADJUSTMENT WASHER, WAVE SPRING, CREST-TO-CREST RETAINER, INSULATION DIAL SHCS, LOW HEAD, RoHS, M5 X 10 MECHANICAL FEED ASSEMBLY AIR FEED MODULE TAG,IDENTIFICATION SCR, BHSC, RoHS (M6 X 20) FEED FINGER ASSEMBLY,EF STANDOFF, HOLD-DOWN PIN, SLOTTED SPRING 3.0 X 14.0 SPRING, COMPRESSION GUIDE PIN,HOLDDOWN GUIDE PIN,HOLDDOWN RING, RETAIN, EXTERN, 3/16 CRESCENT MAGNET, RARE EARTH HIGH ENERGY COUNTER, MAGNETIC SPRING, FEED FINGER O-RING, .801 ID, .070 DIA. MAT. FEED CAM, AIR FEED DETENT PIN SCR, BHSC, RoHS (M4 X 16) APPLICATOR BASIC ASSEMBLY, EF RAM, ASIAN STYLE, END FEED BOLT, ADJUSTMENT PIN, RETAIN, GRVD, 3/16 X .854 MEMORY CHIP, PROGRAMMED SERVO FEED LATCH ASM SPACER, CRIMPER DOCUMENTATION PACKAGE SCR, SET, FLT POINT M3 X 10.0 TAG,IDENTIFICATION SCREW, DRIVE, RH, RoHS HOLDDOWN,TERMINAL LIMITER, ADJUSTMENT BOLT SCR, SET, SOC, CONE POINT, M3 x 4.0 FEED FINGER SHCS, LOW HEAD, RoHS, M4 X 8 SCR, SKT HD CAP, RoHS, M4 X 20 NUT, HEX, REG, RoHS, M4 NUT, HEX, REG, RoHS, M3 NUT, LOCK, HEX, TORQUE (M4) NUT, HEX, REG, RoHS, M3.5 PAWL, EF, AIR SCR, SKT HD CAP M4 X 6.0 SCR, BHSC, RoHS (M8 X 25) DISC, NUMBERED FA WIRE ADJUSTMENT APPLICATOR SHIM PACK RAM WASHER, PRECISION WASHER, FLAT, REG M4 SCR, SKT HD CAP, RoHS, M4 X 20 SCR, SKT HD CAP, RoHS, M4 X 10 STRIPPER (MACHINING) STUD, THREADED PLATE, STRIP GUIDE SPRING, COMPRESSION DRAG STRIP GUIDE, REAR STRIP GUIDE, FRONT SPACER,HOLD-DOWN PLATE, REAR SHEAR PLATE, FRONT SHEAR ANVIL, COMBINATION, END FEED BLADE, SLUG SPACER BLOCK, FL CRIMPER SPACER CRIMPER, INSULATION F PREMIUM SPACER, CRIMPER CRIMPER, WIRE PREMIUM Ocean End Feed Applicator - DRAWING NO 2150311 SCALE 1:1 RESTRICTED TO SHEET 3 OF - 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV A D C B A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION. 6 5 4 3 2 20 LOC REVISIONS DIST A ALL RIGHTS RESERVED. 1 66 P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - 251 40 62 6 DIMENSIONING AND TOLERANCING PER ASME Y14.5M-2009 D 141 FEED TYPE 38 REF 39 16.76 [0.660] 7 7 D 145 153 246 139 140 244 243 50 REF 6 2 166 242 2 2 1 PNEUMATIC 56 7 2 238 249 8 2 250 5 177 A 137 63 HOLDDOWN SET-UP 163 82 1 C 172 1 2 3 C 51 2 1 4 2 41 2 176 70 175 54 174 55 52 20 65 6 10 57 A 180 2 33 164 19 SERVO LATCH PLATE 18 67 213 B 66 B CAM POSITION 30mm STROKE 29 152 SERVO FEEDER NOT INCLUDED A 33 27 8 1 141 144 31 13 9 1 11 1 186 53 33 25 22 24 133 4 135 183 240 REF A A THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. PACIFIC VERSION 49 AIR FEED Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 DIMENSIONS: mm & 2 of 4) MATERIAL AMP 4805 REV 31MAR2000 - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.5 0.13 0.013 0.0001 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 22JAN2013 CHK 22JAN2013 APVD 22JAN2013 Y.YIN G.BAILEY S.XI TE Connectivity Harrisburg, PA 17105-3608 NAME PRODUCT SPEC - APPLICATION SPEC - - WEIGHT SIZE - A1 CAGE CODE 00779 CUSTOMER ACCESSIBLE PRODUCTION DRAWING SHEETS 1 Ocean End Feed Applicator - DRAWING NO 2150311 SCALE 1:1 RESTRICTED TO SHEET 4 OF - 4 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION REV A