Flat Type Chip Fuse Hokuriku Electric Industry Co.,Ltd 【Model Number】 FCL10-*** 【Features】 ■Suitable to portable electronic device for circuit protection. ■By HDK original structure, this is instant-blowing type chip fuse. ■By HDK original process, it has excellent pulse characteristic. ■Due to 1005 size, minimizing of mounting area is possible. ■No smoking, no fire occur when fused. ■Europe RoHS compliant product. 【Dimensions】 (Unit: mm) 【Designation】 Model No. L W t c d FCL10-*** 1.00±0.05 0.50±0.05 0.34±0.05 0.20±0.20 0.25±0.20 ＦＣＬ１０ ① - ２０１ ② Ｖ ③ ①Model No. Model No. Size FCL10 1005 ②Rated Current Marking Rating（A） 201 0.200 251 0.250 321 0.315 351 0.350 381 0.375 401 0.400 501 0.500 631 0.630 751 0.750 801 0.800 102 1.000 132 1.250 152 1.500 162 1.600 202 2.000 252 2.500 302 3.000 ③Packing Form Symbol Form V Paper tape B Bulk 【Specification】 Model No. Marking Rated current A Internal resistance momega Rated voltage (VDC) Breaking current (A) Fusing performance FCL10-201 0.200 1990 C FCL10-251 0.250 1350 D FCL10-321 0.315 850 E FCL10-351 0.350 650 F FCL10-381 0.375 590 G FCL10-401 0.400 530 H FCL10-501 0.500 320 K FCL10-631 0.630 220 L Rated current x200% FCL10-751 0.750 181 24 35 blow-out within 5 M seconds. FCL10-801 0.800 135 N FCL10-102 1.000 115 P FCL10-132 1.250 100 R FCL10-152 1.500 90 S FCL10-162 1.600 58 U FCL10-202 2.000 42 X FCL10-252 2.500 35 Y FCL10-302 3.000 27 Z * Design・specification are subject to change without prior notice. Please check before purchase and use. HOKURIKU Operating temperature range - 55 ℃ ～ 125 ℃ Hokuriku Electric Industry Co.,Ltd 【Structure】 Element Name No. 1 2 3 4 5 6 7 8 9 10 Ceramic substrate Bottom electrode Undercoat Fuse element Ⅰ Fuse element Ⅱ Protective coat 4 5 8 7 6 3 1 9 Marking 2 Side electrode Ni plating Sn plating 【Power derating curve】 ■When used at ambient temperature of 70℃ 70℃ or above, power rating must be derated in accordance with the derating curve. below. FCL 100 Power rating (%) 80 60 40 20 0 -55 0 70 125 Ambient temperature (℃) 2 【I2t-t characteristic】 FCL FCL10 10 10-302 FCL FCL10 10 10-202 FCL FCL10 10 10-252 FCL FCL10 10 10-132 FCL FCL10 10 10-152 FCL FCL10 10 10-162 FCL FCL10 10 10-801 FCL FCL10 10 10-751 FCL FCL10 10 10-102 FCL FCL10 10 10-631 FCL FCL10 10 10-401 FCL10 10FCL 10 -501 FCL FCL10 10 10-381 FCL FCL10 10 10-351 FCL FCL10 10 10-321 FCL FCL10 10 10-251 FCL FCL10 10 10-201 【Fusing characteristic】 FCL10 FCL10 -302 FCL10 FCL10 -252 FCL10 FCL10 -202 FCL10 10 -162 FCL FCL10 FCL10 -152 FCL10 FCL10 -132 FCL10 FCL10 -102 FCL10 FCL10 -801 FCL10 FCL10 -751 FCL10 FCL10 -631 FCL10 FCL10 -501 100.0000 10.0000 1 FCL10 FCL10 -401 FCL10 FCL10 -381 Joule heat熱(A s) ジュール ジュール熱 [A22s] Fusing time 溶断時間 溶断時間[s] [s](s) FCL10 FCL10 -351 0.1 0.01 1.0000 FCL10 FCL10 -321 FCL10 FCL10 -251 FCL10 FCL10 -201 0.1000 0.0100 0.001 0.0010 0.0001 0.1 1 10 100 0.0001 0.0001 0.001 0.01 0.1 1 Fusing time 溶断時間[s] [s] (s) 溶断時間 印加電流[A] [A] (A) 印加電流 Applied Current 【Caution on use】 - Please consult in advance about the use of those other than the specification written in this catalog. For use in the circuit which generates inrush current, please fully check durability against the inrush current. Please do not use this fuse for primary side. Please fully check characteristic against abnormality expected at normal use condition. We do not recommend mounting or reworking of fuse by soldering iron, since control of temperature and time is unclear. Please do not apply soldering iron to fuse terminal directly. Please do not reuse the fuse which was once mounted. Specification described in this catalog are subject to change without prior notice. When use to the apparatus that could affect human lives, such as automotive, and the apparatus that may incur serious damage is considered, please consult in advance. * Design・specification are subject to change without prior notice. Please check before purchase and use. HOKURIKU 10