D../CRCW....-P Vishay Lead (Pb)-bearing Thick Film, Rectangular Precision Chip Resistor FEATURES • Low temperature coefficient (25 ppm/K) and tight tolerances (± 0.25 %) • Excellent stability ((|ΔR/R| ≤ ± 1 % for 1000 h at 70 °C) • SnPb contacts on Ni barrier layer • Metal glaze on high quality ceramic • Protective overglaze STANDARD ELECTRICAL SPECIFICATIONS SIZE MODEL POWER RATING P70 °C W INCH METRIC D10/CRCW0402-P D11/CRCW0603-P 0402 0603 1005 1608 0.063 0.1 LIMITING ELEMENT VOLTAGE MAX. V≅ 50 75 TEMPERATURE COEFFICIENT ppm/K TOLERANCE % RESISTANCE RANGE Ω ± 100 ± 0.5 10R - 1M0 ± 50 ± 0.25; ± 0.5; ± 1 100R - 1M0 ± 25 ± 0.5; ± 1 1K0 - 10K ± 100 ± 0.5 10R - 10M ± 0.5; ± 1 100R - 10M ± 0.25 100R - 1M0 ± 0.25; ± 0.5; ± 1 200R - 10K ± 50 ± 25 ± 100 D12/CRCW0805-P D25/CRCW1206-P 0805 1206 2012 3216 0.125 0.25 150 200 ± 0.5 10R - 10M ± 0.5; ± 1 100R - 10M ± 0.25 100R - 1M0 ± 25 ± 0.25; ± 0.5; ± 1 150R - 10K ± 100 ± 0.5 10R - 10M ± 0.5; ± 1 100R - 10M ± 0.25 100R - 1M0 ± 0.25; ± 0.5; ± 1 150R - 10K ± 50 ± 50 ± 25 CRCW1210-P 1210 3225 0.33 200 CRCW1218-P 1218 3246 1.0 200 CRCW2010-P 2010 5025 0.5 400 CRCW2512-P 2512 6332 1.0 500 ± 100 ± 0.5 ± 50 ± 0.5; ± 1 ± 100 ± 0.5 ± 50 ± 0.5; ± 1 ± 100 ± 0.5 10R - 10M ± 50 ± 0.5; ± 1 100R - 10M E-SERIES 24 + 96 24 + 96 24 + 96 24 + 96 100R - 1M0 24 + 96 100R - 2M2 24 + 96 ± 100 ± 0.5 10R - 10M ± 50 ± 0.5; ± 1 100R - 10M 24 + 96 24 + 96 Notes • These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. • Marking and packaging: see appropriate catalog or web pages • Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material www.vishay.com 136 For technical questions, contact: [email protected] Document Number: 20009 Revision: 13-Oct-08 D../CRCW....-P Lead (Pb)-bearing Thick Film, Rectangular Precision Chip Resistor Vishay TECHNICAL SPECIFICATIONS PARAMETER UNIT D10/ D11/ D12/ D25/ CRCW1210-P CRCW1218-P CRCW2010-P CRCW2512-P CRCW0402-P CRCW0603-P CRCW0805-P CRCW1206-P Rated Dissipation at 70 °C (3) W 0.063 0.1 0.125 0.25 0.33 1 0.5 1 Limiting Element Voltage (2) V≅ 50 75 150 200 200 200 400 500 Insulation Voltage (1 min) Vpeak > 75 > 100 > 200 > 300 > 300 > 300 > 300 > 300 Thermal Resistance (1) K/W ≤ 870 ≤ 550 ≤ 440 ≤ 220 ≤ 140 ≤ 65 ≤ 88 ≤ 65 29.5 25.5 40.5 Insulation Resistance Ω Category Temperature Range °C Failure Rate h-1 Weight/1000 pieces > 109 - 55 to + 155 0.3 x 10-9 g 0.65 2 5.5 10 16 Notes (1) For sizes 0402 until 1206 the measuring conditions are in acc. to EN 140401-802. For all other sizes the result depends on the solder pad dimensions. (2) Rated voltage: PxR (3) The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 °C is not exceeded. PART NUMBER AND PRODUCT DESCRIPTION PART NUMBER: CRCW080525R0DKTAP (4) C R C W 0 8 0 5 2 5 R 0 D K T A P MODEL/SIZE VALUE TOLERANCE TCR PACKAGING (5) SPECIAL CRCW0402 CRCW0603 CRCW0805 CRCW1206 CRCW1210 CRCW1218 CRCW2010 CRCW2512 R = Decimal K = Thousand M = Million C = ± 0.25 % D = ± 0.5 % F=±1% E = ± 25 ppm/K H = ± 50 ppm/K K = ± 100 ppm/K TA, TB, TC, TD, TE, TF, TG, TH, TI, TK, TL up to 2 digits P = Precision PRODUCT DESCRIPTION: CRCW0805 25R0 D 100 RT1 CRCW0805 25R0 D 100 RT1 MODEL CRCW0402 CRCW0603 CRCW0805 CRCW1206 CRCW1210 CRCW1218 CRCW2010 CRCW2512 RESISTANCE VALUE 49R9 = 49.9 Ω 5R1 = 5.1 Ω TOLERANCE TCR PACKAGING (5) C = ± 0.25 % D = ± 0.5 % F=±1% ± 25 ppm/K ± 50 ppm/K ± 100 ppm/K RT1, RT5, RT6, RT7 RT4, R02, R67, R82, RG1, RT9, R20 Notes (4)Preferred (5) Please way for ordering products is by use of the PART NUMBER refer to table PACKAGING, see next page Document Number: 20009 Revision: 13-Oct-08 For technical questions, contact: [email protected] www.vishay.com 137 D../CRCW....-P Lead (Pb)-bearing Thick Film, Rectangular Precision Chip Resistor Vishay PACKAGING REEL MODEL TAPE WIDTH DIAMETER PITCH PIECES/ REEL 2 mm 2 mm 4 mm 4 mm 4 mm 4 mm 4 mm 4 mm 4 mm 4 mm 4 mm 4 mm 4 mm 4 mm 4 mm 4 mm 8 mm 4 mm 10 000 50 000 5000 10 000 20 000 5000 10 000 20 000 5000 10 000 20 000 5000 10 000 20 000 4000 4000 2000 4000 D10/ CRCW0402 8 mm D11/ CRCW0603 8 mm D12/ CRCW0805 8 mm D25/ CRCW1206 8 mm CRCW1210 8 mm CRCW1218 CRCW2010 12 mm 12 mm 180 mm/7" 330 mm/13" 180 mm/7" 285 mm/11.25" 330 mm/13" 180 mm/7" 285 mm/11.25" 330 mm/13" 180 mm/7" 285 mm/11.25" 330 mm/13" 180 mm/7" 285 mm/11.25" 330 mm/13" 180 mm/7" 180 mm/7" CRCW2512 12 mm 180 mm/7" BULK PRODUCT DESC. PAPER BLISTER PART NUMBER PAPER BLISTER TD TE TA TB TC TA TB TC TA TB TC TA TB TC RT7 RF4 RT1 RT5 RT6 RT1 RT5 RT6 RT1 RT5 RT6 RT1 RT5 RT6 TI TL TI TL TI TL RG1 R20 RG1 R20 RG1 R20 TK TF TG TH RT9 R02 R67 R82 DIMENSIONS SOLDER PAD DIMENSIONS [in millimeters] SIZE DIMENSIONS [in millimeters] REFLOW SOLDERING INCH METRIC L W H T1 T2 a b l 0402 1005 1.0 ± 0.05 0.5 ± 0.05 0.35 ± 0.05 0.25 ± 0.05 0.2 ± 0.1 0.4 0.6 0.5 0603 1608 1.55 + 0.10 - 0.05 0.85 ± 0.1 0.45 ± 0.05 0.3 ± 0.2 0.3 ± 0.2 0.5 0.9 0805 2012 2.0 + 0.20 - 0.10 1.25 ± 0.15 0.45 ± 0.05 0.3 0.3 ± 0.2 0.7 1.6 ± 0.15 0.55 ± 0.05 0.45 ± 0.2 0.4 ± 0.2 2.5 ± 0.2 0.55 ± 0.05 0.45 ± 0.2 4.6 ± 0.15 0.55 ± 0.05 + 0.10 - 0.20 WAVE SOLDERING a b l 1.0 0.9 0.9 1.0 1.3 1.2 0.9 1.3 1.3 0.9 1.7 2.0 1.1 1.7 2.3 0.4 ± 0.2 0.9 2.5 2.0 1.1 2.5 2.2 0.45 ± 0.2 0.4 ± 0.2 1.05 4.9 1.9 1.25 4.8 1.9 + 0.20 - 0.10 1206 3216 3.2 1210 3225 3.2 ± 0.2 1218 3246 3.2 2010 5025 5.0 ± 0.15 2.5 ± 0.15 0.6 ± 0.1 0.6 ± 0.2 0.6 ± 0.2 1.0 2.5 3.9 1.2 2.5 3.9 2512 6332 6.3 ± 0.2 3.15 ± 0.15 0.6 ± 0.1 0.6 ± 0.2 0.6 ± 0.2 1.0 3.2 5.2 1.2 3.2 5.2 www.vishay.com 138 + 0.10 - 0.20 For technical questions, contact: [email protected] Document Number: 20009 Revision: 13-Oct-08 D../CRCW....-P 90 80 1206 0402 0603 0805 1210 70 60 Rated Power in % Temperature Rise in °C Lead (Pb)-bearing Thick Film, Rectangular Precision Chip Resistor Vishay 120 100 80 50 2010 60 40 2512 30 40 20 20 10 0 0 0.1 0.2 0.3 0.4 Power in W Temperature Rise 0 - 55 0.5 - 25 0 25 50 Derating 75 70 100 125 155 175 Ambient Temperature in °C TEST PROCEDURES AND REQUIREMENTS EN 60115-1 TEST (clause) CONDITIONS OF TEST REQUIREMENTS PERMISSIBLE CHANGE (ΔR/R) STABILITY CLASS 1 OR BETTER Stability for product types: 10R to 10M D../CRCW....-P Resistance (4.5) Temperature coefficient (4.8.4.2) Overload (4.13) Solderability (4.17.5) Resistance to soldering heat (4.18.2) Rapid change of temperature (4.19) Damp heat, steady state (4.24) Climatic sequence (4.23) Endurance at 70 °C (4.25.1) Extended endurance (4.25.1.8) Endurance at upper category temperature (4.25.3) 20/- 55/20 °C and 20/125/20 °C U = 2.5 x (P70 x R)1/2 ≤ 2 x Umax.; Duration: according the style Aging 4 h at 155 °C, dryheat solder bath method; 235 °C; 2 s visual examination Solder bath method; (260 ± 5) °C; (10 ± 1) s 30 min at LCT = - 55 °C; 30 min at UCT = 125 °C; 5 cycles (40 ± 2) °C; 56 days; (93 ± 3) % RH 16 h at UCT = 125 °C; 1 cycle at 55 °C; 2 h at LCT = - 55 °C; 1 h/1 kPa at 15 °C to 35 °C; 5 cycles at 55 °C U = (P70 × R)1/2 U = Umax.; whichever is less severe U = (P70 × R)1/2 U = Umax.; whichever is less severe 1.5 h ON; 0.5 h OFF; 70 °C; 1000 h Duration extended to 8000 h ± 1 %; ± 0.5 %; ± 0.25 % ± 100 ppm/K; ± 50 ppm/K; ± 100 ppm/K UCT = 125 °C; 1000 h ± (0.25 % R + 0.05 Ω) Good tinning (≥ 95 % covered) no visible damage ± (0.25 % R + 0.05 Ω) ± (0.25 % R + 0.05 Ω) ± (1 % R + 0.05 Ω) ± (1 % R + 0.05 Ω) ± (1 % R + 0.05 Ω) ± (2 % R + 0.1 Ω) ± (1 % R + 0.05 Ω) APPLICABLE SPECIFICATIONS • EN 60115-1 • EN 140400 • EN 140401-802 • IEC 60068-2-x • IEC 60286-3 Document Number: 20009 Revision: 13-Oct-08 Generic Specifications Sectional Specification Detail Specifications Variety of environmental test procedures Packaging of SMD components For technical questions, contact: [email protected] www.vishay.com 139 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000