FTR-K1 SERIES POWER RELAY 1 POLE - 17A Tab Terminal RoHS compliant FTR-K1 Series n FEATURES l l l l l l l l l SPST 17A Low profile (height: 15.7mm) HIGH ISOLATION Insulation Distance (between coil and contacts): 10mm min. Dielectric strength: 5KV Surge strength: 10KV Low coil power (400mW) Cadmium free contacts SAFETY STANDARDS UL, CSA, VDE, SEMKO approved UL, CSA TV-5 rating approved (1 form A type) RoHS Compliant UL F class isolation wire VDE Glow-wire ignitablility test 775 (IEC60335-1) approved n ORDERING INFORMATION [Example] FTR-K1T A (a) (b) K (c) 005 (d) T (e) (a) Series Name FTR-K1T : FTR-K1T Series (b) Tab Terminal Configuration A J : Vertical : Horizontal (c) (d) Coil Type / Enclosure Nominal Voltage K 005 018 048 : Standard (400mW) / flux free : 5 VDC, 006 : 6VDC, 009 : 9VDC : 18 VDC 022 :022VDC 024 : 24VDC : 48VDC (e) Contact Material T : AgSnO2 012 : 12VDC 028 : 28VDC Actual marking does not carry the type name : "FTR" E.g.: Ordering code: FTR-K1CK012W Actual marking: K1CK012W FTR-K1 SERIES n PART NUMBERS 400mW type Ordering Part Number Series Tab Terminal Coil Power Coil Voltage FTR-K1TAK005T 5 FTR-K1TAK006T 6 FTR-K1TAK009T 9 FTR-K1TAK012T FTR-K1TAK018T A: Vertical K: 400 mW 12 18 FTR-K1TAK022T 22 FTR-K1TAK024T 24 FTR-K1TAK028T 28 FTR-K1TAK048T FTR-K1TJK005T K: 430 mW FTRK1T 48 5 FTR-K1TJK006T 6 FTR-K1TJK009T 9 FTR-K1TJK012T J: Horizontal FTR-K1TJK018T Contact Material K: 400 mW 12 18 FTR-K1TJK022T 22 FTR-K1TJK024T 24 FTR-K1TJK028T 28 FTR-K1TJK048T K: 430 mW T: AgSnO2 48 n COIL DATA CHART Coil Voltage Nominal Voltage (VDC) Max. Coil Voltage*1 Coil Resistance (±10%) Must Operate Voltage*2 Must Release Voltage*2 005 5 12.2 VDC 62 Ω 3.5 VDC 0.5 VDC 006 6 14.7 VDC 90 Ω 4.2 VDC 0.6 VDC 009 9 22.0 VDC 202 Ω 6.3 VDC 0.9 VDC 012 12 29.4 VDC 360 Ω 8.4 VDC 1.2 VDC 018 18 44.1 VDC 810 Ω 12.6 VDC 1.8 VDC 022 22 53.9 VDC 1,210 Ω 15.4 VDC 2.2 VDC 024 24 58.8 VDC 1,440 Ω 16.8 VDC 2.4 VDC 028 28 68.6 VDC 1,960 Ω 19.6 VDC 2.8 VDC 048 48 117.6 VDC 5,360 Ω 33.6 VDC 4.8 VDC Nominal Power (mW) 400 430 Note: All values in the table are measured at 20°C. *1: No contact current at 20°C *2: Specified values are subject to pulse wave voltage FTR-K1 SERIES n SPECIFICATIONS Item FTR-K1T ( ) K Contact Arrangement 1 form A Material AgSnO2 Resistance (initial) Maximum 100 mΩ at 1 A, 6 VDC Rating 17 A, 250 VAC Maximum Carrying Current*1 17 A Maximum Inrush Current 78A, 120VAC (lamp load) Maximum Switching Rating 4,250VA Maximum Switching Voltage 440 VAC Minimum Switching Load*2 10 mA 5 VDC Nominal Power (at 20ºC) 400mW (at 430mW 48V coil) Operate Power (at 20ºC) 200 mW (210mW at 48V coil) Operating Temperature -40ºC to +105ºC (no frost) Time Value Operate (without diode) Maximum 15ms (at nominal voltage, no bounce) Release (without diode) Maximum 5ms (at nominal voltage, no bounce) Life Mechanical 20 x 106 operations minimum Coil Other Electrical AC Contact rating 100 x 103 operations min. Vibration Resistance Misoperation 10 to 55 Hz, at double amplitude of 0.7 mm Endurance 10-55Hz, at double amplitude of 1.5 mm Shock Resistance Misoperation Weight Endurance Min. 100m/s2 (11±1ms) Min. 1,000m/s2 (6±1ms) Approximately 13g *1 Need to consider the heat from PCB when max. current is more than 10A. *2 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. FTR-K1 SERIES n INSULATION Item FTR-K1T Note Resistance (initial) Minimum 1,000 MΩ 1 min. at 500 VDC Dielectric Strength open contacts 1,000 VAC (50/60 Hz) 1 min. coil and contacts 5,000 VAC (50/60 Hz) 1 min. Surge Voltage (coil and contact) 10,000 V Clearance/Creepage 10 mm / 10 mm Insulation (DIN EN61810-1 VDE0435) Voltage Pollution Isolation material group 250 V 3 IIIa 1.2 x 50µs standard wave Isolation category / Reference voltage (VDE0110b) C / 250 V n SAFETY STANDARDS Type Compliance Contact rating FTR-K1T ( )K UL UL 508 E63614 Flammability: UL 94-V0 (plastics) 17A, 277 VAC (resistive) 1 HP, 277VAC 1/2 HP, 125VAC TV-5, 120VAC Pilot duty: A300 CSA C22.2 No. 14 LR 40304 VDE 0435, 0631, 0700, 0860, 40013848 17A, 250 VAC (cosØ=1), 105˚C 3.5A, 250 VAC (cosØ=0.4), 105˚C 12A, 250 VAC (cosØ=1), 125˚C 5A/80A 250VAC SEMKO EN 61058-1:1992 and A1 EN 61095:1993 and A1+A11 250VAC, 17 (3)A 40T105 Complies with NEMKO, DEMKO, FIMKO FTR-K1 SERIES KT 80 17A 70 60 10A 50 40 30 0A 20 10 0 0.2 0.4 0.6 0.8 Coil Power (W) Life Curve 1000 FTR-K1TAK AC250V 500 0A 17A 1.5 erate must op 100 50 30 20 AC250V cosφ=0.4 0 2 4 6 8 10 12 14 16 18 20 Contact Current Load (A) il) (hot co voltage ge (cool e volta t operat mus 0.5 0 20 40 60 coil) 80 100 Operate Release 70 60 50 40 30 5 2 0.5 DC resistive 0.2 0.1 10 20 50 100 200 500 1000 Contact Voltage (V) Distribution of Contact Resistance 100 FTR-K1TAK012T N=100 90 Operate 80 70 60 50 40 30 20 20 10 10 0 FTR-KT 10 FTR-K1TAK012T N=100 90 AC resistive 20 Ambient temperature (ºC) 80 200 10 2 Distribution of Operation & Release Voltage 100 AC250V cosφ=0. 300 FTR-KT 1.2 Distribution (%) Service Life (103 operations) 0 50 Switching Current (A) 90 Maximum Switching Power Operating Range 2.5 Distribution (%) Coil Temperature Rise 100 Temperature Rise (deg.) Nominal voltage multiplying factor n CHARACTERISTIC DATA 0 0 10 20 30 40 50 60 70 80 90 100 Nominal Voltage Multiplying Factor 0 10 20 30 40 Contact Resistance (mΩ) 50 FTR-K1 SERIES n DIMENSIONS l Dimensions l Schematics (BOTTOM VIEW) FTR-K1TAK A6.3-0.8 ±0.1 6.35 NO DIN 46244 (#250) Orientation mark 3.3 15 ±0.1 15.7 +0.3 COM (2.6) φ 0.45 Presolder 0.8 0.8 (2.6) 0.8 5 37.5 29 30.2 0.8 l PC board mounting hole layout (BOTTOM VIEW) 7.5 12.7 +0.3 40.5+0.3 37.5 5 4-φ1.3 -0 7.5 (12.7) 2-φ1 ±0.1 (30.2) l Dimensions l Schematics (BOTTOM VIEW) FTR-K1TJK NO A6.3-0.8 DIN 46244 (#250) 29 0.8 37.5 40.5 +0.3 44.5 +0.3 5 0.8 (2.6) 0.8 0.8 7.5 12.7 l PC board mounting hole layout (BOTTOM VIEW) 37.5 5 2-φ1 ±0.1 4-φ1.3 -0 7.5 φ 0.45 Presolder 14 ±0.1 0.5 (2.6) Orientation mark (12.7) 3.3 15.7 +0.3 6.35±0.1 COM (30.2) Unit: mm FTR-K1 SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE, DecaBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C solder bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. FTR-K1 SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://www.fujitsu.com/us/services/edevices/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. August 6, 2008.