C A P A C I T O R S July 2015 MLCC with Dipped Radial Lead (Halogen-free, Automotive Grade) FA Series Type: Lead pitch 5.0 mm FA28 [4.0x5.5mm] FA24 [4.5x5.5mm] FA26 [5.5x6.0mm] FA20 [5.5x7.0mm] FA22 [7.5x8.5mm] Lead pitch 2.5 mm FA18 [4.0x5.5mm] FA14 [4.5x5.5mm] FA16 [5.5x6.0mm] FA11 [5.5x7.0mm] (2/30) C A P A C I T O R S REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using these products. REMINDERS Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and product temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in automotive electronic equipment under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/Aviation equipment (2) Transportation equipment (electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for automotive-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. 20150731 / leadmlcc_halogenfree_fa_en.fm (3/30) C A P A C I T O R S MLCC with Dipped Radial Lead Product compatible with RoHS directive Halogen-free Halogen-free, Automotive Grade Overview of the FA Series FEATURES A complete lineup with a rated voltage of 25V to 630V. Compatible with a wide capacitance range of 1pF to 22μF. The FA series for automotive use is AEC-Q200 compliant. APPLICATION Noise reduction measures for various motors for automotive use Resonant circuits in areas such as keyless entry systems Bypass capacitors such as for switching power sources, smoothing capacitors, etc. Snubber circuits PFC input filters PART NUMBER CONSTRUCTION FA 2 Series name Lead pitch (mm) 1 2 2.5 5.0 8 C0G 1H 010 LxWxT Dimensions (mm) 8 4.0x5.5x2.5 4 4.5x5.5x3.0 6 5.5x6.0x3.5 0 5.5x7.0x4.0 1 5.5x7.0x4.0 2 7.5x8.5x4.5 Capacitance temperature characteristics C0G 0±30ppm/°C X7R ±15% X7S ±22% X7T +22, –33% Rated voltage (V) 1E 25 1H 50 2A 100 2E 250 2W 450 2J 630 Nominal capacitance (pF) 010 1 100 10 101 100 102 1,000 C □□□ □ Capacitance tolerance Internal code Packaging Style C ±0.25pF D ±0.5pF J ±5% K ±10% M ±20% 0 6 Bulk Taping Applicable capacitance range: Max. 10 pF for C and D, over 10 pF for J, K, and M. Applied to the TDK’s standard specification products. OPERATING TEMPERATURE RANGE Temperature range Operating temperature Storage temperature (°C) (°C) C0G, X7R, X7S, X7T –55 to +125 –55 to +125 The Storage temperature range is for after the circuit board is mounted. Capacitance temperature characteristics RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/ Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa_en.fm (4/30) C A P A C I T O R S Overview of the FA Series PACKAGE QUANTITY Type FA28 FA24 FA26 FA20 FA22 FA18 FA14 FA16 FA11 Package quantity Taping (pieces / box) Bulk (pieces / bag) 2000 500 2000 500 2000 500 1500 500 1000 500 2000 500 2000 500 2000 500 1500 500 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa_en.fm (5/30) C A P A C I T O R S Overview of the FA Series RECOMMENDED FLOW PROFILE Soldering Preheating Natural cooling T: Temperature T2 T1 t1 t2 t3 t: Time Preheating Temp. T1 110°C min. Time t1 Over 60s. Peak Temp. T2 260°C Time t2 Within 5s. Natural cooling Time t3 Over 60s. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa_en.fm (6/30) C A P A C I T O R S FA28 Type SHAPE & DIMENSIONS 2.5max. 7.0±2.0 5.5max. 4.0max. +0.10 ø0.5 –0.03 5.0±1.0 Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa_en.fm (7/30) C A P A C I T O R S FA28 Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE CLASS 1 (TEMPERATURE COMPENSATION) Temperature characteristics C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G Capacitance 1.0pF 1.5pF 2.2pF 3.3pF 4.7pF 6.8pF 10pF 15pF 22pF 33pF 47pF 68pF 100pF 120pF 150pF 180pF 220pF 270pF 330pF 390pF 470pF 560pF 680pF 820pF 1nF 1.2nF 1.5nF 1.8nF 2.2nF 2.7nF 3.3nF 3.9nF 4.7nF 5.6nF 6.8nF 8.2nF 10nF 1.0pF 1.5pF 2.2pF 3.3pF 4.7pF 6.8pF 10pF 15pF 22pF 33pF 47pF 68pF 100pF Tolerance Rated voltage Edc (V) 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 100 100 100 100 100 100 100 100 100 100 100 100 100 Part No. ±0.25pF FA28C0G1H010CNU0□ ±0.25pF FA28C0G1H1R5CNU0□ ±0.25pF FA28C0G1H2R2CNU0□ ±0.25pF FA28C0G1H3R3CNU0□ ±0.25pF FA28C0G1H4R7CNU0□ ±0.5pF FA28C0G1H6R8DNU0□ ±0.5pF FA28C0G1H100DNU0□ ±5％ FA28C0G1H150JNU0□ ±5％ FA28C0G1H220JNU0□ ±5％ FA28C0G1H330JNU0□ ±5％ FA28C0G1H470JNU0□ ±5％ FA28C0G1H680JNU0□ ±5％ FA28C0G1H101JNU0□ ±5％ FA28C0G1H121JNU0□ ±5％ FA28C0G1H151JNU0□ ±5％ FA28C0G1H181JNU0□ ±5％ FA28C0G1H221JNU0□ ±5％ FA28C0G1H271JNU0□ ±5％ FA28C0G1H331JNU0□ ±5％ FA28C0G1H391JNU0□ ±5％ FA28C0G1H471JNU0□ ±5％ FA28C0G1H561JNU0□ ±5％ FA28C0G1H681JNU0□ ±5％ FA28C0G1H821JNU0□ ±5％ FA28C0G1H102JNU0□ ±5％ FA28C0G1H122JNU0□ ±5％ FA28C0G1H152JNU0□ ±5％ FA28C0G1H182JNU0□ ±5％ FA28C0G1H222JNU0□ ±5％ FA28C0G1H272JNU0□ ±5％ FA28C0G1H332JNU0□ ±5％ FA28C0G1H392JNU0□ ±5％ FA28C0G1H472JNU0□ ±5％ FA28C0G1H562JNU0□ ±5％ FA28C0G1H682JNU0□ ±5％ FA28C0G1H822JNU0□ ±5％ FA28C0G1H103JNU0□ ±0.25pF FA28C0G2A010CNU0□ ±0.25pF FA28C0G2A1R5CNU0□ ±0.25pF FA28C0G2A2R2CNU0□ ±0.25pF FA28C0G2A3R3CNU0□ ±0.25pF FA28C0G2A4R7CNU0□ ±0.5pF FA28C0G2A6R8DNU0□ ±0.5pF FA28C0G2A100DNU0□ ±5％ FA28C0G2A150JNU0□ ±5％ FA28C0G2A220JNU0□ ±5％ FA28C0G2A330JNU0□ ±5％ FA28C0G2A470JNU0□ ±5％ FA28C0G2A680JNU0□ ±5％ FA28C0G2A101JNU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa_en.fm (8/30) C A P A C I T O R S FA28 Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE CLASS 1 (TEMPERATURE COMPENSATION) Temperature characteristics C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G Capacitance 120pF 150pF 180pF 220pF 270pF 330pF 390pF 470pF 560pF 680pF 820pF 1nF 1.2nF 1.5nF 1.8nF 2.2nF 2.7nF 3.3nF 100pF 120pF 150pF 180pF 220pF 270pF 330pF 390pF 470pF 560pF 680pF 820pF 1nF 1.2nF 1.5nF 1.8nF 2.2nF Tolerance Rated voltage Edc (V) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 Part No. ±5％ FA28C0G2A121JNU0□ ±5％ FA28C0G2A151JNU0□ ±5％ FA28C0G2A181JNU0□ ±5％ FA28C0G2A221JNU0□ ±5％ FA28C0G2A271JNU0□ ±5％ FA28C0G2A331JNU0□ ±5％ FA28C0G2A391JNU0□ ±5％ FA28C0G2A471JNU0□ ±5％ FA28C0G2A561JNU0□ ±5％ FA28C0G2A681JNU0□ ±5％ FA28C0G2A821JNU0□ ±5％ FA28C0G2A102JNU0□ ±5％ FA28C0G2A122JNU0□ ±5％ FA28C0G2A152JNU0□ ±5％ FA28C0G2A182JNU0□ ±5％ FA28C0G2A222JNU0□ ±5％ FA28C0G2A272JNU0□ ±5％ FA28C0G2A332JNU0□ ±5％ FA28C0G2E101JNU0□ ±5％ FA28C0G2E121JNU0□ ±5％ FA28C0G2E151JNU0□ ±5％ FA28C0G2E181JNU0□ ±5％ FA28C0G2E221JNU0□ ±5％ FA28C0G2E271JNU0□ ±5％ FA28C0G2E331JNU0□ ±5％ FA28C0G2E391JNU0□ ±5％ FA28C0G2E471JNU0□ ±5％ FA28C0G2E561JNU0□ ±5％ FA28C0G2E681JNU0□ ±5％ FA28C0G2E821JNU0□ ±5％ FA28C0G2E102JNU0□ ±5％ FA28C0G2E122JNU0□ ±5％ FA28C0G2E152JNU0□ ±5％ FA28C0G2E182JNU0□ ±5％ FA28C0G2E222JNU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa_en.fm (9/30) C A P A C I T O R S FA28 Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE CLASS 2 (TEMPERATURE STABLE) Temperature characteristics X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7S X7S X7S X7S Capacitance 150nF 680nF 1uF 1nF 1.5nF 2.2nF 3.3nF 4.7nF 6.8nF 10nF 15nF 22nF 33nF 47nF 68nF 100nF 150nF 220nF 330nF 470nF 1nF 1.5nF 2.2nF 3.3nF 4.7nF 6.8nF 10nF 15nF 22nF 33nF 47nF 68nF 100nF Tolerance Rated voltage Edc (V) 25 25 25 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 100 100 100 100 100 100 100 100 100 100 100 100 100 Part No. ±10％ FA28X7R1E154KNU0□ ±10％ FA28X7R1E684KRU0□ ±10％ FA28X7R1E105KRU0□ ±10％ FA28X7R1H102KNU0□ ±10％ FA28X7R1H152KNU0□ ±10％ FA28X7R1H222KNU0□ ±10％ FA28X7R1H332KNU0□ ±10％ FA28X7R1H472KNU0□ ±10％ FA28X7R1H682KNU0□ ±10％ FA28X7R1H103KNU0□ ±10％ FA28X7R1H153KNU0□ ±10％ FA28X7R1H223KNU0□ ±10％ FA28X7R1H333KNU0□ ±10％ FA28X7R1H473KNU0□ ±10％ FA28X7R1H683KNU0□ ±10％ FA28X7R1H104KNU0□ ±10％ FA28X7R1H154KRU0□ ±10％ FA28X7R1H224KRU0□ ±10％ FA28X7R1H334KRU0□ ±10％ FA28X7R1H474KRU0□ ±10％ FA28X7R2A102KNU0□ ±10％ FA28X7R2A152KNU0□ ±10％ FA28X7R2A222KNU0□ ±10％ FA28X7R2A332KNU0□ ±10％ FA28X7R2A472KNU0□ ±10％ FA28X7R2A682KNU0□ ±10％ FA28X7R2A103KNU0□ ±10％ FA28X7R2A153KNU0□ ±10％ FA28X7R2A223KNU0□ ±10％ FA28X7S2A333KRU0□ ±10％ FA28X7S2A473KRU0□ ±10％ FA28X7S2A683KRU0□ ±10％ FA28X7S2A104KRU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa_en.fm (10/30) C A P A C I T O R S FA24 Type SHAPE & DIMENSIONS 3.0max. 7.0±2.0 5.5max. 4.5max. +0.10 ø0.5 –0.03 5.0±1.0 Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa_en.fm (11/30) C A P A C I T O R S FA24 Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE CLASS 1 (TEMPERATURE COMPENSATION) Temperature characteristics C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G Capacitance 15nF 22nF 33nF 3.9nF 4.7nF 5.6nF 6.8nF 8.2nF 10nF 2.7nF 3.3nF 3.9nF 4.7nF 5.6nF 6.8nF 8.2nF 10nF 100pF 120pF 150pF 180pF 220pF 270pF 330pF 390pF 470pF 560pF 680pF 820pF 1nF 1.2nF 1.5nF 1.8nF 2.2nF 2.7nF 3.3nF 3.9nF 4.7nF 5.6nF Tolerance Rated voltage Edc (V) 50 50 50 100 100 100 100 100 100 250 250 250 250 250 250 250 250 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 Part No. ±5％ FA24C0G1H153JNU0□ ±5％ FA24C0G1H223JNU0□ ±5％ FA24C0G1H333JNU0□ ±5％ FA24C0G2A392JNU0□ ±5％ FA24C0G2A472JNU0□ ±5％ FA24C0G2A562JNU0□ ±5％ FA24C0G2A682JNU0□ ±5％ FA24C0G2A822JNU0□ ±5％ FA24C0G2A103JNU0□ ±5％ FA24C0G2E272JNU0□ ±5％ FA24C0G2E332JNU0□ ±5％ FA24C0G2E392JNU0□ ±5％ FA24C0G2E472JNU0□ ±5％ FA24C0G2E562JNU0□ ±5％ FA24C0G2E682JNU0□ ±5％ FA24C0G2E822JNU0□ ±5％ FA24C0G2E103JNU0□ ±5％ FA24C0G2W101JNU0□ ±5％ FA24C0G2W121JNU0□ ±5％ FA24C0G2W151JNU0□ ±5％ FA24C0G2W181JNU0□ ±5％ FA24C0G2W221JNU0□ ±5％ FA24C0G2W271JNU0□ ±5％ FA24C0G2W331JNU0□ ±5％ FA24C0G2W391JNU0□ ±5％ FA24C0G2W471JNU0□ ±5％ FA24C0G2W561JNU0□ ±5％ FA24C0G2W681JNU0□ ±5％ FA24C0G2W821JNU0□ ±5％ FA24C0G2W102JNU0□ ±5％ FA24C0G2W122JNU0□ ±5％ FA24C0G2W152JNU0□ ±5％ FA24C0G2W182JNU0□ ±5％ FA24C0G2W222JNU0□ ±5％ FA24C0G2W272JNU0□ ±5％ FA24C0G2W332JNU0□ ±5％ FA24C0G2W392JNU0□ ±5％ FA24C0G2W472JNU0□ ±5％ FA24C0G2W562JNU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa_en.fm (12/30) C A P A C I T O R S FA24 Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE CLASS 2 (TEMPERATURE STABLE) Temperature characteristics X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7S X7S X7S X7S X7S X7S X7T X7T X7T X7T Capacitance 470nF 3.3uF 4.7uF 150nF 220nF 330nF 680nF 1uF 1.5uF 2.2uF 33nF 47nF 68nF 100nF 1nF 1.5nF 2.2nF 3.3nF 4.7nF 6.8nF 10nF 15nF 22nF 150nF 220nF 330nF 470nF 680nF 1uF 33nF 47nF 68nF 100nF Tolerance Rated voltage Edc (V) 25 25 25 50 50 50 50 50 50 50 100 100 100 100 250 250 250 250 250 250 250 250 250 100 100 100 100 100 100 250 250 250 250 Part No. ±10％ FA24X7R1E474KNU0□ ±10％ FA24X7R1E335KRU0□ ±10％ FA24X7R1E475KRU0□ ±10％ FA24X7R1H154KNU0□ ±10％ FA24X7R1H224KNU0□ ±10％ FA24X7R1H334KNU0□ ±10％ FA24X7R1H684KRU0□ ±10％ FA24X7R1H105KRU0□ ±10％ FA24X7R1H155KRU0□ ±10％ FA24X7R1H225KRU0□ ±10％ FA24X7R2A333KNU0□ ±10％ FA24X7R2A473KNU0□ ±10％ FA24X7R2A683KNU0□ ±10％ FA24X7R2A104KNU0□ ±10％ FA24X7R2E102KNU0□ ±10％ FA24X7R2E152KNU0□ ±10％ FA24X7R2E222KNU0□ ±10％ FA24X7R2E332KNU0□ ±10％ FA24X7R2E472KNU0□ ±10％ FA24X7R2E682KNU0□ ±10％ FA24X7R2E103KNU0□ ±10％ FA24X7R2E153KNU0□ ±10％ FA24X7R2E223KNU0□ ±10％ FA24X7S2A154KRU0□ ±10％ FA24X7S2A224KRU0□ ±10％ FA24X7S2A334KRU0□ ±10％ FA24X7S2A474KRU0□ ±10％ FA24X7S2A684KRU0□ ±10％ FA24X7S2A105KRU0□ ±10％ FA24X7T2E333KNU0□ ±10％ FA24X7T2E473KNU0□ ±10％ FA24X7T2E683KNU0□ ±10％ FA24X7T2E104KNU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa_en.fm (13/30) C A P A C I T O R S FA26 Type SHAPE & DIMENSIONS 3.5max. 7.0±2.0 6.0max. 5.5max. +0.10 ø0.5 –0.03 5.0±1.0 Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa_en.fm (14/30) C A P A C I T O R S FA26 Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE CLASS 1 (TEMPERATURE COMPENSATION) Temperature characteristics C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G Capacitance 47nF 68nF 100nF 15nF 22nF 33nF 15nF 22nF 6.8nF 8.2nF 10nF 15nF 100pF 120pF 150pF 180pF 220pF 270pF 330pF 390pF 470pF 560pF 680pF 820pF 1nF 1.2nF 1.5nF 1.8nF 2.2nF 2.7nF 3.3nF 3.9nF 4.7nF 5.6nF 6.8nF 8.2nF 10nF Tolerance Rated voltage Edc (V) 50 50 50 100 100 100 250 250 450 450 450 450 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 630 Part No. ±5％ FA26C0G1H473JNU0□ ±5％ FA26C0G1H683JNU0□ ±5％ FA26C0G1H104JNU0□ ±5％ FA26C0G2A153JNU0□ ±5％ FA26C0G2A223JNU0□ ±5％ FA26C0G2A333JNU0□ ±5％ FA26C0G2E153JNU0□ ±5％ FA26C0G2E223JNU0□ ±5％ FA26C0G2W682JNU0□ ±5％ FA26C0G2W822JNU0□ ±5％ FA26C0G2W103JNU0□ ±5％ FA26C0G2W153JNU0□ ±5％ FA26C0G2J101JNU0□ ±5％ FA26C0G2J121JNU0□ ±5％ FA26C0G2J151JNU0□ ±5％ FA26C0G2J181JNU0□ ±5％ FA26C0G2J221JNU0□ ±5％ FA26C0G2J271JNU0□ ±5％ FA26C0G2J331JNU0□ ±5％ FA26C0G2J391JNU0□ ±5％ FA26C0G2J471JNU0□ ±5％ FA26C0G2J561JNU0□ ±5％ FA26C0G2J681JNU0□ ±5％ FA26C0G2J821JNU0□ ±5％ FA26C0G2J102JNU0□ ±5％ FA26C0G2J122JNU0□ ±5％ FA26C0G2J152JNU0□ ±5％ FA26C0G2J182JNU0□ ±5％ FA26C0G2J222JNU0□ ±5％ FA26C0G2J272JNU0□ ±5％ FA26C0G2J332JNU0□ ±5％ FA26C0G2J392JNU0□ ±5％ FA26C0G2J472JNU0□ ±5％ FA26C0G2J562JNU0□ ±5％ FA26C0G2J682JNU0□ ±5％ FA26C0G2J822JNU0□ ±5％ FA26C0G2J103JNU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa_en.fm (15/30) C A P A C I T O R S FA26 Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE CLASS 2 (TEMPERATURE STABLE) Temperature characteristics X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7S X7S X7S X7T X7T Capacitance 1uF 1.5uF 2.2uF 6.8uF 10uF 470nF 680nF 3.3uF 4.7uF 150nF 220nF 330nF 470nF 680nF 1uF 33nF 47nF 68nF 100nF 1nF 1.5nF 2.2nF 3.3nF 4.7nF 6.8nF 10nF 15nF 22nF 33nF 1.5uF 2.2uF 3.3uF 150nF 220nF Tolerance Rated voltage Edc (V) 25 25 25 25 25 50 50 50 50 100 100 100 100 100 100 250 250 250 250 630 630 630 630 630 630 630 630 630 630 100 100 100 250 250 Part No. ±10％ FA26X7R1E105KNU0□ ±10％ FA26X7R1E155KNU0□ ±10％ FA26X7R1E225KNU0□ ±10％ FA26X7R1E685KRU0□ ±10％ FA26X7R1E106KRU0□ ±10％ FA26X7R1H474KNU0□ ±10％ FA26X7R1H684KNU0□ ±10％ FA26X7R1H335KRU0□ ±10％ FA26X7R1H475KRU0□ ±10％ FA26X7R2A154KNU0□ ±10％ FA26X7R2A224KNU0□ ±10％ FA26X7R2A334KNU0□ ±10％ FA26X7R2A474KNU0□ ±10％ FA26X7R2A684KNU0□ ±10％ FA26X7R2A105KNU0□ ±10％ FA26X7R2E333KNU0□ ±10％ FA26X7R2E473KNU0□ ±10％ FA26X7R2E683KNU0□ ±10％ FA26X7R2E104KNU0□ ±10％ FA26X7R2J102KNU0□ ±10％ FA26X7R2J152KNU0□ ±10％ FA26X7R2J222KNU0□ ±10％ FA26X7R2J332KNU0□ ±10％ FA26X7R2J472KNU0□ ±10％ FA26X7R2J682KNU0□ ±10％ FA26X7R2J103KNU0□ ±10％ FA26X7R2J153KNU0□ ±10％ FA26X7R2J223KNU0□ ±10％ FA26X7R2J333KNU0□ ±10％ FA26X7S2A155KRU0□ ±10％ FA26X7S2A225KRU0□ ±10％ FA26X7S2A335KRU0□ ±10％ FA26X7T2E154KNU0□ ±10％ FA26X7T2E224KNU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa_en.fm (16/30) C A P A C I T O R S FA20 Type SHAPE & DIMENSIONS 4.0max. 7.0±2.0 7.0max. 5.5max. +0.10 ø0.5 –0.03 5.0±1.0 Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa_en.fm (17/30) C A P A C I T O R S FA20 Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE CLASS 1 (TEMPERATURE COMPENSATION) Temperature characteristics C0G C0G C0G C0G C0G C0G C0G C0G C0G Capacitance Tolerance 47nF 68nF 33nF 47nF 22nF 33nF 15nF 22nF 33nF Rated voltage Edc (V) 100 100 250 250 450 450 630 630 630 Part No. ±5％ FA20C0G2A473JNU0□ ±5％ FA20C0G2A683JNU0□ ±5％ FA20C0G2E333JNU0□ ±5％ FA20C0G2E473JNU0□ ±5％ FA20C0G2W223JNU0□ ±5％ FA20C0G2W333JNU0□ ±5％ FA20C0G2J153JNU0□ ±5％ FA20C0G2J223JNU0□ ±5％ FA20C0G2J333JNU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). CLASS 2 (TEMPERATURE STABLE) Temperature characteristics X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7S X7S X7S X7T Capacitance 3.3uF 4.7uF 1uF 1.5uF 1.5uF 2.2uF 150nF 220nF 47nF 68nF 6.8uF 10uF 4.7uF 330nF Tolerance Rated voltage Edc (V) 25 25 50 50 100 100 250 250 630 630 50 50 100 250 Part No. ±10％ FA20X7R1E335KNU0□ ±10％ FA20X7R1E475KNU0□ ±10％ FA20X7R1H105KNU0□ ±10％ FA20X7R1H155KNU0□ ±10％ FA20X7R2A155KRU0□ ±10％ FA20X7R2A225KRU0□ ±10％ FA20X7R2E154KNU0□ ±10％ FA20X7R2E224KNU0□ ±10％ FA20X7R2J473KNU0□ ±10％ FA20X7R2J683KNU0□ ±10％ FA20X7S1H685KRU0□ ±10％ FA20X7S1H106KRU0□ ±10％ FA20X7S2A475KRU0□ ±10％ FA20X7T2E334KNU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa_en.fm (18/30) C A P A C I T O R S FA22 Type SHAPE & DIMENSIONS 4.5max. 7.0±2.0 8.5max. 7.5max. Dimensions in mm +0.10 ø0.5 –0.03 5.0±1.0 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa_en.fm (19/30) C A P A C I T O R S FA22 Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE CLASS 1 (TEMPERATURE COMPENSATION) Temperature characteristics C0G C0G C0G C0G C0G C0G C0G C0G Capacitance Tolerance 150nF 220nF 100nF 68nF 100nF 47nF 68nF 47nF Rated voltage Edc (V) 50 50 100 250 250 450 450 630 Part No. ±5％ FA22C0G1H154JNU0□ ±5％ FA22C0G1H224JNU0□ ±5％ FA22C0G2A104JNU0□ ±5％ FA22C0G2E683JRU0□ ±5％ FA22C0G2E104JRU0□ ±5％ FA22C0G2W473JNU0□ ±5％ FA22C0G2W683JNU0□ ±5％ FA22C0G2J473JNU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). CLASS 2 (TEMPERATURE STABLE) Temperature characteristics X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7T X7T Capacitance 10uF 15uF 22uF 2.2uF 3.3uF 4.7uF 6.8uF 1.5uF 2.2uF 330nF 470nF 100nF 680nF 1uF Tolerance Rated voltage Edc (V) 25 25 25 50 50 50 50 100 100 250 250 630 250 250 Part No. ±10％ FA22X7R1E106KNU0□ ±20％ FA22X7R1E156MRU0□ ±20％ FA22X7R1E226MRU0□ ±10％ FA22X7R1H225KNU0□ ±10％ FA22X7R1H335KNU0□ ±10％ FA22X7R1H475KRU0□ ±10％ FA22X7R1H685KRU0□ ±10％ FA22X7R2A155KNU0□ ±10％ FA22X7R2A225KNU0□ ±10％ FA22X7R2E334KNU0□ ±10％ FA22X7R2E474KNU0□ ±10％ FA22X7R2J104KNU0□ ±10％ FA22X7T2E684KNU0□ ±10％ FA22X7T2E105KNU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa_en.fm (20/30) C A P A C I T O R S FA18 Type SHAPE & DIMENSIONS 2.5max. 7.0±2.0 5.5max. 4.0max. +0.10 ø0.5 –0.03 2.5±0.8 Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa_en.fm (21/30) C A P A C I T O R S FA18 Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE CLASS 1 (TEMPERATURE COMPENSATION) Temperature characteristics C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G Capacitance 1.0pF 1.5pF 2.2pF 3.3pF 4.7pF 6.8pF 10pF 15pF 22pF 33pF 47pF 68pF 100pF 120pF 150pF 180pF 220pF 270pF 330pF 390pF 470pF 560pF 680pF 820pF 1nF 1.2nF 1.5nF 1.8nF 2.2nF 2.7nF 3.3nF 3.9nF 4.7nF 5.6nF 6.8nF 8.2nF 10nF 1.0pF 1.5pF 2.2pF 3.3pF 4.7pF 6.8pF 10pF 15pF 22pF 33pF 47pF 68pF 100pF Tolerance Rated voltage Edc (V) 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 100 100 100 100 100 100 100 100 100 100 100 100 100 Part No. ±0.25pF FA18C0G1H010CNU0□ ±0.25pF FA18C0G1H1R5CNU0□ ±0.25pF FA18C0G1H2R2CNU0□ ±0.25pF FA18C0G1H3R3CNU0□ ±0.25pF FA18C0G1H4R7CNU0□ ±0.5pF FA18C0G1H6R8DNU0□ ±0.5pF FA18C0G1H100DNU0□ ±5％ FA18C0G1H150JNU0□ ±5％ FA18C0G1H220JNU0□ ±5％ FA18C0G1H330JNU0□ ±5％ FA18C0G1H470JNU0□ ±5％ FA18C0G1H680JNU0□ ±5％ FA18C0G1H101JNU0□ ±5％ FA18C0G1H121JNU0□ ±5％ FA18C0G1H151JNU0□ ±5％ FA18C0G1H181JNU0□ ±5％ FA18C0G1H221JNU0□ ±5％ FA18C0G1H271JNU0□ ±5％ FA18C0G1H331JNU0□ ±5％ FA18C0G1H391JNU0□ ±5％ FA18C0G1H471JNU0□ ±5％ FA18C0G1H561JNU0□ ±5％ FA18C0G1H681JNU0□ ±5％ FA18C0G1H821JNU0□ ±5％ FA18C0G1H102JNU0□ ±5％ FA18C0G1H122JNU0□ ±5％ FA18C0G1H152JNU0□ ±5％ FA18C0G1H182JNU0□ ±5％ FA18C0G1H222JNU0□ ±5％ FA18C0G1H272JNU0□ ±5％ FA18C0G1H332JNU0□ ±5％ FA18C0G1H392JNU0□ ±5％ FA18C0G1H472JNU0□ ±5％ FA18C0G1H562JNU0□ ±5％ FA18C0G1H682JNU0□ ±5％ FA18C0G1H822JNU0□ ±5％ FA18C0G1H103JNU0□ ±0.25pF FA18C0G2A010CNU0□ ±0.25pF FA18C0G2A1R5CNU0□ ±0.25pF FA18C0G2A2R2CNU0□ ±0.25pF FA18C0G2A3R3CNU0□ ±0.25pF FA18C0G2A4R7CNU0□ ±0.5pF FA18C0G2A6R8DNU0□ ±0.5pF FA18C0G2A100DNU0□ ±5％ FA18C0G2A150JNU0□ ±5％ FA18C0G2A220JNU0□ ±5％ FA18C0G2A330JNU0□ ±5％ FA18C0G2A470JNU0□ ±5％ FA18C0G2A680JNU0□ ±5％ FA18C0G2A101JNU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa_en.fm (22/30) C A P A C I T O R S FA18 Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE CLASS 1 (TEMPERATURE COMPENSATION) Temperature characteristics C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G Capacitance 120pF 150pF 180pF 220pF 270pF 330pF 390pF 470pF 560pF 680pF 820pF 1nF 1.2nF 1.5nF 1.8nF 2.2nF 2.7nF 3.3nF Tolerance Rated voltage Edc (V) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Part No. ±5％ FA18C0G2A121JNU0□ ±5％ FA18C0G2A151JNU0□ ±5％ FA18C0G2A181JNU0□ ±5％ FA18C0G2A221JNU0□ ±5％ FA18C0G2A271JNU0□ ±5％ FA18C0G2A331JNU0□ ±5％ FA18C0G2A391JNU0□ ±5％ FA18C0G2A471JNU0□ ±5％ FA18C0G2A561JNU0□ ±5％ FA18C0G2A681JNU0□ ±5％ FA18C0G2A821JNU0□ ±5％ FA18C0G2A102JNU0□ ±5％ FA18C0G2A122JNU0□ ±5％ FA18C0G2A152JNU0□ ±5％ FA18C0G2A182JNU0□ ±5％ FA18C0G2A222JNU0□ ±5％ FA18C0G2A272JNU0□ ±5％ FA18C0G2A332JNU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa_en.fm (23/30) C A P A C I T O R S FA18 Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE CLASS 2 (TEMPERATURE STABLE) Temperature characteristics X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7S X7S X7S X7S Capacitance 150nF 680nF 1uF 1nF 1.5nF 2.2nF 3.3nF 4.7nF 6.8nF 10nF 15nF 22nF 33nF 47nF 68nF 100nF 150nF 220nF 330nF 470nF 1nF 1.5nF 2.2nF 3.3nF 4.7nF 6.8nF 10nF 15nF 22nF 33nF 47nF 68nF 100nF Tolerance Rated voltage Edc (V) 25 25 25 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 100 100 100 100 100 100 100 100 100 100 100 100 100 Part No. ±10％ FA18X7R1E154KNU0□ ±10％ FA18X7R1E684KRU0□ ±10％ FA18X7R1E105KRU0□ ±10％ FA18X7R1H102KNU0□ ±10％ FA18X7R1H152KNU0□ ±10％ FA18X7R1H222KNU0□ ±10％ FA18X7R1H332KNU0□ ±10％ FA18X7R1H472KNU0□ ±10％ FA18X7R1H682KNU0□ ±10％ FA18X7R1H103KNU0□ ±10％ FA18X7R1H153KNU0□ ±10％ FA18X7R1H223KNU0□ ±10％ FA18X7R1H333KNU0□ ±10％ FA18X7R1H473KNU0□ ±10％ FA18X7R1H683KNU0□ ±10％ FA18X7R1H104KNU0□ ±10％ FA18X7R1H154KRU0□ ±10％ FA18X7R1H224KRU0□ ±10％ FA18X7R1H334KRU0□ ±10％ FA18X7R1H474KRU0□ ±10％ FA18X7R2A102KNU0□ ±10％ FA18X7R2A152KNU0□ ±10％ FA18X7R2A222KNU0□ ±10％ FA18X7R2A332KNU0□ ±10％ FA18X7R2A472KNU0□ ±10％ FA18X7R2A682KNU0□ ±10％ FA18X7R2A103KNU0□ ±10％ FA18X7R2A153KNU0□ ±10％ FA18X7R2A223KNU0□ ±10％ FA18X7S2A333KRU0□ ±10％ FA18X7S2A473KRU0□ ±10％ FA18X7S2A683KRU0□ ±10％ FA18X7S2A104KRU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa_en.fm (24/30) C A P A C I T O R S FA14 Type SHAPE & DIMENSIONS 3.0max. 7.0±2.0 5.5max. 4.5max. +0.10 ø0.5 –0.03 2.5±0.8 Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa_en.fm (25/30) C A P A C I T O R S FA14 Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE CLASS 1 (TEMPERATURE COMPENSATION) Temperature characteristics C0G C0G C0G C0G C0G C0G C0G C0G C0G Capacitance Tolerance 15nF 22nF 33nF 3.9nF 4.7nF 5.6nF 6.8nF 8.2nF 10nF Rated voltage Edc (V) 50 50 50 100 100 100 100 100 100 Part No. ±5％ FA14C0G1H153JNU0□ ±5％ FA14C0G1H223JNU0□ ±5％ FA14C0G1H333JNU0□ ±5％ FA14C0G2A392JNU0□ ±5％ FA14C0G2A472JNU0□ ±5％ FA14C0G2A562JNU0□ ±5％ FA14C0G2A682JNU0□ ±5％ FA14C0G2A822JNU0□ ±5％ FA14C0G2A103JNU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). CHARACTERISTICS SPECIFICATION TABLE CLASS 2 (TEMPERATURE STABLE) Temperature characteristics X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7S X7S X7S X7S X7S X7S Capacitance 470nF 3.3uF 4.7uF 150nF 220nF 330nF 680nF 1uF 1.5uF 2.2uF 33nF 47nF 68nF 100nF 150nF 220nF 330nF 470nF 680nF 1uF Tolerance Rated voltage Edc (V) 25 25 25 50 50 50 50 50 50 50 100 100 100 100 100 100 100 100 100 100 Part No. ±10％ FA14X7R1E474KNU0□ ±10％ FA14X7R1E335KRU0□ ±10％ FA14X7R1E475KRU0□ ±10％ FA14X7R1H154KNU0□ ±10％ FA14X7R1H224KNU0□ ±10％ FA14X7R1H334KNU0□ ±10％ FA14X7R1H684KRU0□ ±10％ FA14X7R1H105KRU0□ ±10％ FA14X7R1H155KRU0□ ±10％ FA14X7R1H225KRU0□ ±10％ FA14X7R2A333KNU0□ ±10％ FA14X7R2A473KNU0□ ±10％ FA14X7R2A683KNU0□ ±10％ FA14X7R2A104KNU0□ ±10％ FA14X7S2A154KRU0□ ±10％ FA14X7S2A224KRU0□ ±10％ FA14X7S2A334KRU0□ ±10％ FA14X7S2A474KRU0□ ±10％ FA14X7S2A684KRU0□ ±10％ FA14X7S2A105KRU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa_en.fm (26/30) C A P A C I T O R S FA16 Type SHAPE & DIMENSIONS 3.5max. 7.0±2.0 6.0max. 5.5max. +0.10 ø0.5 –0.03 2.5±0.8 Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa_en.fm (27/30) C A P A C I T O R S FA16 Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE CLASS 1 (TEMPERATURE COMPENSATION) Temperature characteristics C0G C0G C0G C0G C0G C0G Capacitance Tolerance 47nF 68nF 100nF 15nF 22nF 33nF Rated voltage Edc (V) 50 50 50 100 100 100 Part No. ±5％ FA16C0G1H473JNU0□ ±5％ FA16C0G1H683JNU0□ ±5％ FA16C0G1H104JNU0□ ±5％ FA16C0G2A153JNU0□ ±5％ FA16C0G2A223JNU0□ ±5％ FA16C0G2A333JNU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). CHARACTERISTICS SPECIFICATION TABLE CLASS 2 (TEMPERATURE STABLE) Temperature characteristics X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7S X7S X7S Capacitance 1uF 1.5uF 2.2uF 6.8uF 10uF 470nF 680nF 3.3uF 4.7uF 150nF 220nF 330nF 470nF 680nF 1uF 1.5uF 2.2uF 3.3uF Tolerance Rated voltage Edc (V) 25 25 25 25 25 50 50 50 50 100 100 100 100 100 100 100 100 100 Part No. ±10％ FA16X7R1E105KNU0□ ±10％ FA16X7R1E155KNU0□ ±10％ FA16X7R1E225KNU0□ ±10％ FA16X7R1E685KRU0□ ±10％ FA16X7R1E106KRU0□ ±10％ FA16X7R1H474KNU0□ ±10％ FA16X7R1H684KNU0□ ±10％ FA16X7R1H335KRU0□ ±10％ FA16X7R1H475KRU0□ ±10％ FA16X7R2A154KNU0□ ±10％ FA16X7R2A224KNU0□ ±10％ FA16X7R2A334KNU0□ ±10％ FA16X7R2A474KNU0□ ±10％ FA16X7R2A684KNU0□ ±10％ FA16X7R2A105KNU0□ ±10％ FA16X7S2A155KRU0□ ±10％ FA16X7S2A225KRU0□ ±10％ FA16X7S2A335KRU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa_en.fm (28/30) C A P A C I T O R S FA11 Type SHAPE & DIMENSIONS 4.0max. 7.0±2.0 7.0max. 5.5max. +0.10 ø0.5 –0.03 2.5±0.8 Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa_en.fm (29/30) C A P A C I T O R S FA11 Type ELECTRICAL CHARACTERISTICS CHARACTERISTICS SPECIFICATION TABLE CLASS 1 (TEMPERATURE COMPENSATION) Temperature characteristics C0G C0G Capacitance Tolerance 47nF 68nF Rated voltage Edc (V) 100 100 Part No. ±5％ FA11C0G2A473JNU0□ ±5％ FA11C0G2A683JNU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). CLASS 2 (TEMPERATURE STABLE) Temperature characteristics X7R X7R X7R X7R X7R X7R X7S X7S X7S Capacitance 3.3uF 4.7uF 1uF 1.5uF 1.5uF 2.2uF 6.8uF 10uF 4.7uF Tolerance Rated voltage Edc (V) 25 25 50 50 100 100 50 50 100 Part No. ±10％ FA11X7R1E335KNU0□ ±10％ FA11X7R1E475KNU0□ ±10％ FA11X7R1H105KNU0□ ±10％ FA11X7R1H155KNU0□ ±10％ FA11X7R2A155KRU0□ ±10％ FA11X7R2A225KRU0□ ±10％ FA11X7S1H685KRU0□ ±10％ FA11X7S1H106KRU0□ ±10％ FA11X7S2A475KRU0□ * The part numbers are TDK’s standard specification products. The " □ " of the Part Number contains the packaging symbol, 0 (Bulk packaging) or 6 (Taping packaging). Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa_en.fm (30/30) C A P A C I T O R S Packaging Style TAPING DIMENSIONS t Lead pitch 5.0 mm (FA28, FA24, FA26, FA20, FA22 Type) P2 P Δh P F W1 t L0 3 F ød øD 'h W3 W0 L0 W2 H0 P1 Symbol P P0 1 P1 P2 W0 W1 W2 2 W3 H0 øD ød Dimensions (mm) 12.7±1.0 12.7±0.3 3.85±0.7 6.35±1.3 12.0±1.0 9.0±0.5 3.0max. 18.0+1.0, –0.5 16.0±0.5 1.0max. 0.6±0.2 11.0max. 5.0+0.8, –0.2 ø0.5+0.1, –0.03 ø4.0±0.2 0±2 1 Accumulated pitch tolerance shall be ±2mm for 20 pitches. Adhesive tape shall not stick out from carrier tape. 3 The number of consecutive gaps in the product shall be three or less. P0 2 t Lead pitch 2.5 mm (FA18, FA14, FA16, FA11 Type) P2 P Δh P øD F ød W3 W0 W1 L0 W2 H0 P1 Symbol P P0 1 P1 P2 W0 W1 W2 2 W3 H0 t L0 3 F ød øD 'h Dimensions (mm) 12.7±1.0 12.7±0.3 5.1±0.7 6.35±1.3 12.0±1.0 9.0±0.5 3.0max. 18.0+1.0, –0.5 16.0±0.5 1.0max. 0.6±0.2 11.0max. 2.5+0.5, –0.2 ø0.5+0.1, –0.03 ø4.0±0.2 0±2 1 Accumulated pitch tolerance shall be ±2mm for 20 pitches. Adhesive tape shall not stick out from carrier tape. 3 The number of consecutive gaps in the product shall be three or less. P0 2 250max. AMMO PACK INNER BOX SIZE x. ma 340max. 50 Dimensions in mm Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20150731 / leadmlcc_halogenfree_fa_en.fm