LED Display Product Data Sheet LTL-7100M-HB Spec No.: DS30-2012-0068 Effective Date: 09/22/2012 Revision: A LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only LED DISPLAY LTL-7100M-HB DATA SHEET Item 1 2 3 4 5 Description New Spec 1.1 Add Bin Tables in Page 7 and 10 1.2 Modify Packing Dimensions Modify Packing Dimensions for request Modify Iv Range 4.1 Add Wave Soldering Instruction in Page 6 4.2 Modify Iv Range in Page 7 5.1 Add Hue Table in Page 8 and 11 5.2 Add Symbol Picture in Page 4 PART NO.:LTL-7100M-HB BNS-OD-C131/A4 By DATE Reo Lin 2012/01/06 Reo Lin 2012/02/08 Reo Lin Reo Lin 2012/02/09 2012/02/10 Reo Lin 2012/06/07 Reo Lin 2012/09/13 PAGE: 1 of 12 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only FEATURES ＊RECTANGULAR LIGHT BAR. ＊LARGE, BRIGHT, UNIFORM LIGHT EMITTING AREAS. ＊LOW POWER REQUIREMENT. ＊HIGH BRIGHTNESS & HIGH CONTRAST. ＊SOLID STATE RELIABILITY. ＊CATEGORIZED FOR LUMINOUS INTENSITY. ＊LEAD-FREE PACKAGE(ACCORDING TO ROHS) DESCRIPTION The LTL-7100M-HB is a light bar rectangular light sources designed for a variety of applications where a large bright source of light is required. The device utilize AS-AlInGaP GREEN LED chips (AlInGaP epi on GaAs substrate) & AS-AlInGaP Yellow Orange LED chips (AlInGaP epi on GaAs substrate), and has white bar.This display is built by special reflector material that can pass high-temperature soldering condition.(reference wave soldering instruction in Page 6) DEVICE PART NO. DESCRIPTION Multiplex color Universal Rectangular Bar LTL-7100M-HB PART NO.:LTL-7100M-HB BNS-OD-C131/A4 PAGE: 2 of 12 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PACKAGE DIMENSIONS NOTES: 1. All dimensions are in millimeters. Tolerances are 0.25 mm (0.01“) unless otherwise noted. 2. Pin tip’s shift tolerance is 0.4 mm. 3. Foreign material on segment ≦10mils 4. Ink contamination (surface) ≦20mils 5. Bending≦1% of reflector length 6. Bubble in segment ≦10mils 7. Recommend the best pcb hole : diameter 1.0mm 8. BIN CODE shows AlInGaP Yellow Orange BIN CODE and HUE CODE, then shows AlInGaP Green BIN CODE and HUE CODE PART NO.:LTL-7100M-HB BNS-OD-C131/A4 PAGE: 3 of 12 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only SYMBOL PICTURE AlInGaP Yellow Orange BIN CODE and HUE CODE AlInGaP Green BIN CODE and HUE CODE PART NO.:LTL-7100M-HB BNS-OD-C131/A4 PAGE: 4 of 12 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only INTERNAL CIRCUIT DIAGRAM is A lIn G a p Y e llo w O ra n g e , D o m in a n t W a ve le n g th is 6 0 5 n m is A lIn G a p G re e n , D o m in a n t W a ve le n g th is 5 7 2 n m PIN CONNECTION No PART NO.:LTL-7100M-HB BNS-OD-C131/A4 CONNECTION 1 ANODE A ,CATHODE B 2 CATHODE A , ANODE B 3 ANODE C ,CATHODE 4 CATHODE 5 ANODE E ,CATHODE 6 CATHODE 7 ANODE G ,CATHODE 8 CATHODE D C , ANODE D F E , ANODE F H G , ANODE H PAGE: 5 of 12 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only WAVE SOLDERING INSTRUCTION PART NO.:LTL-7100M-HB BNS-OD-C131/A4 PAGE: 6 of 12 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only AlInGaP GREEN ABSOLUTE MAXIMUM RATING AT Ta=25 oC PARAMETER MAXIMUM RATING UNIT Power Dissipation Per Segment 70 mW Peak Forward Current Per Segment (Frequency 1Khz, 10% duty cycle ) 60 mA Continuous Forward Current Per Segment Forward Current Derating from 25℃ 25 0.28 -35℃ to +105℃ Operating Temperature Range mA mA/℃ -35℃ to +105℃ Storage Temperature Range Soldering Conditions : 1/16 inch below seating plane for 5 seconds at 265℃± 5℃ ELECTRICAL / OPTICAL CHARACTERISTICS PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION Average Luminous Intensity Per Segment IV Peak Emission Wavelength 31 mcd IF=10mA p 571 nm IF=20mA Spectral Line Half-Width 15 nm IF=20mA Dominant Wavelength d 572 nm IF=20mA VF 2.05 2.6 V IF=20mA IR 100 A VR=5V IV-m 2:1 Forward Voltage Per Segment Reverse Current Per Segment (2) Luminous Intensity Matching Ratio (Similar Light Area) PART NO.:LTL-7100M-HB BNS-OD-C131/A4 8.601 IF=10mA PAGE: 7 of 12 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only BIN CODE(unit: cd) BIN Grade Range N1 N2 P1 P2 Q1 Q2 R1 R2 S1 S2 8601 10901 13701 17301 21821 27521 34701 43751 55171 69561 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 10900 13700 17300 21820 27520 34700 43750 55170 69560 87710 HUE TABLE (unit:nm) Hue grade 4 5 6 7 8 Range(nm) If=20mA 566.1 568.1 570.1 572.1 574.1 568 570 572 574.0 576.0 Tolerance for each Dominate Wavelength is +/- 1 nm Note:1.Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (Commision Internationale De L’Eclairage) eye-response curve. 2. Reverse voltage is only for IR test. It can not continue to operate at this situation. 3. Must choose same BIN or close two BIN devices while you assemble 2 or above 2 pcs ND devices for one set application. PART NO.:LTL-7100M-HB BNS-OD-C131/A4 PAGE: 8 of 12 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES (25oC Ambient Temperature Unless Otherwise Noted) PART NO.:LTL-7100M-HB BNS-OD-C131/A4 PAGE: 9 of 12 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only AlInGaP Yellow Orange ABSOLUTE MAXIMUM RATING PARAMETER MAXIMUM RATING UNIT Power Dissipation Per Segment 70 mW Peak Forward Current Per Segment ( Frequency 1Khz, 10% duty cycle) 60 mA Continuous Forward Current Per Segment Derating Linear From 25℃ Per Segment 25 0.28 -35℃ to +105℃ Operating Temperature Range mA mA/℃ -35℃ to +105℃ Storage Temperature Range Soldering Conditions : 1/16 inch below seating plane for 5 seconds at 265℃± 5℃ ELECTRICAL / OPTICAL CHARACTERISTICS PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION Average Luminous Intensity Per Segment IV Peak Emission Wavelength 85 mcd IF=10mA p 611 nm IF=20mA Spectral Line Half-Width 15 nm IF=20mA Dominant Wavelength d 605 nm IF=20mA VF 2.1 2.6 V IF=20mA IR 100 A VR=5V IV-m 2:1 Forward Voltage Per Segment Reverse Current Per Segment (2) Luminous Intensity Matching Ratio (Same Light Area) PART NO.:LTL-7100M-HB BNS-OD-C131/A4 40.9 IF=10mA PAGE: 10 of 12 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only BIN CODE (unit: cd) BIN Grade Range R1 R2 S1 S2 T1 T2 U1 U2 V1 V2 34701 43751 55171 69561 87711 110701 139701 176701 223501 282701 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 43750 55170 69560 87710 110700 139700 176700 223500 282700 357600 HUE TABLE (unit:nm) Hue grade 1 2 3 4 5 Range(nm) If=20mA 602.1 604.1 606.1 608.6 611.1 604.0 606.0 608.5 611.0 613.5 Tolerance for each Dominate Wavelength is +/- 1 nm Note:1.Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (Commision Internationale De L’Eclairage) eye-response curve. 2. Reverse voltage is only for IR test. It can not continue to operate at this situation. 3. Must choose same BIN or close two BIN devices while you assemble 2 or above 2 pcs ND devices for one set application. PART NO.:LTL-7100M-HB BNS-OD-C131/A4 PAGE: 11 of 12 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES (25oC Ambient Temperature Unless Otherwise Noted) PART NO.:LTL-7100M-HB BNS-OD-C131/A4 PAGE: 12 of 12