ITT CAR3100A Itt cannon is the foremost manufac-turer of ms and ms type connectors with the widest range of connector style Datasheet

ca_A1-A163.qxd:Layout 1
2/9/11
7:49 PM
Page 72
CA /MS A&B
Circular
A
ITT Cannon is the foremost manufacturer of MS and MS type connectors
with the widest range of connector
styles, sizes and variations in the
industry. These connectors utilize the
finest materials, which, along with
precision manufacturing and rigid
quality control, assure ITT Cannon
customers of the finest quality connectors. The MS A & B product line
has environmentally safe green and
black zinc alloy plating. The Black
zinc plating is RoHS complaint. The
plating is a high quality, uniform finish. The contact, which are preloaded
in the insulator, have been
redesigned such that the solder cups
remain in the proper orientation and
will not rotate during wiring termination. The contacts are machined for
strength and durability and plated
with silver. The Cannon MS A&B
design meets the performance
requirements of the MIL-C-5015. The
product is available in all the popular
sizes and configurations available in
Class A (solid end bell) and Class B
(split end bell) versions.
Applications:
• Industrial Controls
• Test Equipment
• Traffic Signals
• Bus Systems
Product Features and Benefits
• High strength aluminum alloy connector
• Threaded coupling
• High strength plastic insulators
• Product is tooled and available in 50 insert patterns
• Environmentally safe shell finishes
• Machined contacts
• Protected against corrosion
• Low cost
• High quality plating finish
• UL recognized
Performance Specifications
Temperature Range:
Current Rating:
Durability:
Wire Accommodation:
No. of Contacts:
Termination:
–55°C to 125°C (-67°F to 257°F)
13 A to 150 A*
500 mating cycles min.
0 to 20 AWG*
2 to 48
Solder
*Depending on contact size.
ELECTRICAL SERVICE DATA
Test current ratings of contacts and
allowable voltage drop under test conditions when assembled as in service
are shown below. Maximum total current to be carried per connector is the
same as the allowable in wire bundles
as specified in MIL-W-5088.
Contact
Size
16
12
8
4
0
Test Current
(amps)
13
23
46
80
150
Potential Drop
(millivolts)
49
42
28
23
21
HIGH POTENTIAL TEST VOLTAGE
MS connectors show no evidence of breakdown with the test voltage given
below is applied between the two closest contacts and between the shell and
the contacts closest to the shell for a period of one minute.
MS
Service
Rating
Inst.
A
D
E
B
C
Test
Voltage
(RMS)
60 cps
1000
2000
2800
3500
4500
7000
Suggested*
Operating Voltages
DC
AC (rms)
250
200
700
500
1250
900
1750
1250
2450
1750
4200
3000
Air
Spacing
Nom.
(inches)
Creepage
Distance
Nom.
(inches)
1/16
1/8
3/16
1/4
5/16
1
1/16
1/8
3/16
1/4
5/16
*As indicated in previous MS Specification and to be used by designer only as a guide.
Materials and Finishes
Description
Shell
Insulator
Contact
Material
Aluminum Alloy
Hard Plastic
Brass or Copper Alloy
Finish
Green Zinc Standard, Black Zinc (RoHS), OD CAD
—
Silver
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-72
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:49 PM
Page 73
MS A&B
Introduction
CA/MS 3100A wall mounting receptacles are used to carry wires through
walls or bulkheads, or to provide the
means of disconnection at a bulkhead. CA/MS 3100A receptacles mate
with CA/MS 3106 and 3108 plugs.
A
Circular
CA/MS 3101A cable connecting
receptacles are used for cable
extension
requirements
where
mounting provisions are unnecessary.
CA/MS 3101A plugs mate with
3106A/B and 3108B connectors.
Note: The D revision of MIL-C-5015
has changed the nomenclature of the
3101 from receptacle to plugs.
CA/MS 3102A box mounted receptacles are used in junction boxes or as
an integral part of equipment. CA/MS
3102A receptacles will mate with
3106 and 3108 plugs.
CA/MS 3106A straight plug utilizes a
solid endbell. The CA/MS 3106A
mates with 3100, 3101, and 3102
connectors
CA/MS 3106B is identical to the
3106A straight plug except it utilizes
a split endbell. CA/MS 3106B mates
with 3100, 3101, and 3102 connectors.
CA/MS 3108B 90° angle plugs are
used where there is limited space ad
where wires must be brought at
abrupt angles. This plug will mate
with 3100, 3101, and 3102 connectors.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A-73
ca_A1-A163.qxd:Layout 1
2/9/11
7:49 PM
Page 74
CA /MS A&B
How to Order
Circular
A
SERIES PREFIX
MS – Complies with Military
Specification MIL-C-5015
CA – Cannon prefix
CAR – RoHS Compliant (Black Zinc Only)
SHELL STYLE
3100 – Wall Mounting Receptacle
(A version only)
3101 – Cable Connector Receptacle
(A version only)
3102 – Box Mounting Receptacle
3106 – Straight Plug
3108 – 90° Angle Plug
(B version only)
CLASS
A – Solid or one-piece endbell
B – Split or two-piece endbell
SHELL SIZE
Coupling thread diameter in
sixteenths of an inch
CONTACT ARRANGEMENTS
Refer to page B-5
CONTACT TYPE
P – Pin
S – Socket
ALTERNATE INSERT POSITIONS
Refer to page 4
MODIFICATIONS
A206 (RoHS) Black Zinc Plating
Contact Cannon for other options.
For more information, please
contact your local Cannon sales office.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-74
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:49 PM
Page 75
CA /MS A&B
Contact Cavity Arrangements
A
10SL-4 *
2 - #16
2 - #16
3 - #16
4 - #16
5 - #16
6 - #16
3 - #16
2 - #16
2 - #16 (B, D)
2 - #12 (A, C)
3 - #12
2 - #12
A
A
A
A
Inst.
Inst.
Inst.
A
A
A
A
A
3 - #16
Service
Rating
16S-1
12S-3
16S-8
14S-1
18-1
14S-2
18-4
14S-5
14S-6
18-5
18-8
7 - #16
5 - #16
10 - #16
4 - #16
1 - #16 (A)
2 - #12 (B, C)
7 - #16 (A-G)
1 - #12 (H)
A
A
A (B,C,F,G)
Inst. (all others)
D
D
A
18-20
18-22
18-9
16-9
18-10
5 - #16 (B, C, E-G)
2 - #12 (A, D)
16-10
16-11
18-11
18-12
4 - #12
5 - #12
6 - #16
A
A
A
Inst.
3 - #16
3 - #12
4 - #12
8 - #16
20-7
20-19
3 - #8
14 - #16
17 - #16
11 - #16
A
D
D
D
A (C-F)
D (A,B,G,F)
A
A
A
A
22-14
20-4
14S-9
5 - #16
22-2
20-3
14S-7
19 - #16
14 - #16
8 - #12
7 - #12
7 - #12
24-2
24-10
D
A
A
D (H)
A (all others)
A
D
A
24-28
Inst.
28-10
3 - #12 (A, F, G)
2 - #8 (B, E)
2 - #4 (C, D)
D (G)
A (all others)
36-5
22-23
28-11
22-28
20-29
3 - #8
24 - #16
22-19
20-27
28-12
28-15
7 - #8
28-16
20-33
24-20
9 - #16 (A-D, G-L)
2 - #12 (E, F)
D
28-21
18 - #16 (A-I, N-X)
4 - #12 (J-M)
26 - #16
35 - #16
20 - #16
37 - #16
A
A
A
A
A
36-7
36-8
36-10
4 - #0
40 - #16 (A-Z, a-s)
7 - #12 (t-z)
46 - #16 (A-X, Z-z)
1 - #12 (Y)
48 - #16
A
A
A
A
* 10SL is available in the following configurations only: 3100, 3101, 3102,
pin contacts only and 3106 and 3108 socket contacts only
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A-75
Circular
10SL-3*
ca_A1-A163.qxd:Layout 1
2/9/11
7:49 PM
Page 76
CA /MS A&B
Wall Mounting Receptacle - Solid Endbell
MS3100A
CA/CAR 3100A
Circular
A
ITT CANNON
HARDWARE
KIT NO.
(GREEN ZINC)
ITT CANNON
HARDWARE
KIT NO.
(BLACK ZINC)
*
* 10SL is available in the following configurations only: 3100, 3101, 3102,
pin contacts only and 3106 and 3108 socket contacts only
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-76
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:49 PM
Page 77
CA /MS A&B
Cable Connecting Receptacle - Solid Endbell
MS3101A
CA/CAR 3101A
A
Circular
ITT CANNON
HARDWARE
KIT NO.
(GREEN ZINC)
ITT CANNON
HARDWARE
KIT NO.
(BLACK ZINC)
*
* 10SL is available in the following configurations only: 3100, 3101, 3102,
pin contacts only and 3106 and 3108 socket contacts only
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A-77
ca_A1-A163.qxd:Layout 1
2/9/11
7:49 PM
Page 78
CA /MS A&B
Box Mounting Receptacle
MS3102A
CA/CAR 3102A
Circular
A
ITT CANNON
HARDWARE
KIT NO.
(GREEN ZINC)
ITT CANNON
HARDWARE
KIT NO.
(BLACK ZINC)
*
* 10SL is available in the following configurations only: 3100, 3101, 3102,
pin contacts only and 3106 and 3108 socket contacts only
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-78
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 79
CA /MS A&B
Straight Plug - Solid Endbell
MS3106A
CA/CAR 3106A
A
Circular
ITT CANNON
HARDWARE
KIT NO.
(GREEN ZINC)
ITT CANNON
HARDWARE
KIT NO.
(BLACK ZINC)
*
* 10SL is available in the following configurations only: 3100, 3101, 3102,
pin contacts only and 3106 and 3108 socket contacts only
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A-79
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 80
CA /MS A&B
Straight Plug - Split Endbell
MS3106B
CA/CAR 3106B
Circular
A
ITT CANNON
HARDWARE
KIT NO.
(GREEN ZINC)
ITT CANNON
HARDWARE
KIT NO.
(BLACK ZINC)
*
* 10SL is available in the following configurations only: 3100, 3101, 3102,
pin contacts only and 3106 and 3108 socket contacts only
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-80
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 81
CA /MS A&B
90° Angle Plug - Split Endbell
MS3108B
CA/CAR 3108B
A
Circular
ITT CANNON
HARDWARE
KIT NO.
(GREEN ZINC)
ITT CANNON
HARDWARE
KIT NO.
(BLACK ZINC)
*
* 10SL is available in the following configurations only: 3100, 3101, 3102,
pin contacts only and 3106 and 3108 socket contacts only
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A-81
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 82
CA /MS A&B
Alternate Insert Positions
Pin front view: Shell rotation
Circular
A
Contact
Arrangement
10SL-3
10SL-4
12S-3
14S-1
14S-2
14S-5
14S-6
14S-7
W˚
—
—
70
—
—
—
—
90
X˚
—
—
145
—
120
110
—
180
Y˚
—
—
215
—
240
—
—
270
Z˚
—
—
290
—
—
—
—
—
Contact
Arrangement
14S-9
16-9
16-10
16-11
16S-1
16S-8
18-1
18-4
18-5
18-8
18-9
18-10
18-11
18-12
18-20
18-22
20-3
20-4
20-7
20-19
20-27
W˚
70
35
90
35
80
—
70
35
80
70
80
—
—
80
90
70
70
45
80
90
35
X˚
145
110
180
110
—
170
145
110
110
—
110
120
170
—
180
145
145
110
110
180
110
Y˚
215
250
270
250
—
265
215
250
250
—
250
240
265
—
270
215
215
250
250
270
250
Contact
Arrangement
20-29
20-33
22-2
22-14
22-19
22-23
22-28
24-2
24-10
24-20
24-28
28-10
28-11
28-12
28-15
28-16
28-21
36-5
36-7
36-8
36-10
Z˚
290
325
—
325
280
—
290
325
280
290
280
—
—
280
—
290
290
—
280
—
325
W˚
80
35
70
80
80
35
80
80
80
80
80
80
80
90
80
80
80
—
80
80
80
X˚
—
110
145
—
110
—
—
—
—
110
110
110
110
180
110
110
110
120
110
110
125
Y˚
—
256
215
—
250
250
—
—
—
250
250
250
250
270
250
250
250
240
250
250
235
Z˚
280
325
290
280
280
—
280
280
280
280
280
280
280
—
280
280
280
—
280
280
280
Accessories
Cable clamps are available in both the
environmentally safe green zinc and
black zinc, and will accommodate
shell sizes 10SL-36. Double clamping
action provides a balanced, positive
hold on the wires and greatly reduces
moisture transmission, a real benefit
in applications that require environmental sealing. This clamp is provided
with the bushing.
Shell Size
Part Number
Green Zinc
10SL, 12S
14S
16S, 16
18
20, 22
24, 28
32
36
CA17711-111
CA17711-112
CA17711-113
CA17711-114
CA17711-115
CA17711-116
CA17711-117
CA17711-118
Part Number
Black Zinc
RoHS compliant
CA17711-103
CA17711-104
CA17711-101
CA17711-102
CA17711-22
CA17711-105
CA17711-106
CA17711-107
A
L
Z
4A
.811
(20.60)
.969
(24.60)
1.094
(27.80)
1.89
(30.20)
1.378
(35.00)
1.693
(43.00)
2.031
(51.60)
2.220
(56.40)
.811
(20.60)
.969
(24.60)
1.094
(27.80)
1.89
(30.20)
1.378
(35.00)
1.693
(43.00)
2.031
(51.60)
2.220
(56.40)
5/8-24INEF-2B
995-0002-558 995-0002-280 995-0002-550
3/4-20UNEF-2B
995-0002-559 995-0002-281 995-0002-551
7/8-20UNEF-2B
995-0002-560 995-0002-282 995-0002-552
1-20UNEF-2B
995-0002-561 995-0002-283 995-0002-553
6A
8A
10A
12A
16A
20A
24A
Green Zinc
Black Zinc
RoHS
compliant
Size
Cadmium
13/16-18UNEF-2B 995-0002-562 995-0002-284 995-0002-554
17/16-18UNEF-2B 995-0002-563 995-0002-285 995-0002-555
1-3/4-18UNS-2B
995-0002-564 995-0002-286 995-0002-556
2-18UNS-2B
995-0002-565 995-0002-287 995-0002-557
Metal Protective Caps
For more information on protective caps contact
Interconnect Solutions Sales Offices.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-82
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 83
MS-E/F/R/ER
MIL-C-5015 Connectors
POTTING ER CONNECTORS (Solder Contact
Termination)
These Lightweight potting connectors provide
resistance to salt water,
fuels, etc., and will withstand the effects of high
vibration. 3100 and 3106
connectors with plastic
potting cups and resilient inserts meet the requirements of
MS3103 and MS25183. Contacts are silver plated copper or
brass. ER insulators are resilient; shells are aluminum alloy.
A 90º plug (3108ER) is also available.
ENVIRONMENTAL RESISTANT MS-E, MS-F, MS-R,
AND F80 (Solder/Crimp Termination)
MS-E, MS-F and MS-R are similar to MS-A and MS-B
connectors but have resilient insulators and wire
sealing grommets for extreme environmental conditions and high altitude sealing. MS-E’s and MS-F’s
have a mechanical cable clamp; the MS-R has a
shorter, lighter weight endbell without the cable
clamp. Both the MS-F and MS-R have O rings to supplement the interfacial seal. Shells are aluminum
alloy. Contacts are silver plated copper alloy. The F80
modification (crimp contact termination) is available
in E, R, F and BFR styles with resilient insulators.
ACCESSORIES
Accessories to fit fit MS
connectors
include
junction shells, protective caps, dummy or
stowage receptacles,
cable clamps, telescoping bushings.
How to Order
In the latest revision of MIL-C-5015, a new
class of environment-resistant connectors
was added. This new class F connector supersedes the previous class E connector. The
MS3106F has an O ring under the coupling
nut. The class E will be available upon request
for existing programs, and upon ordering will
also bear the E nomenclature on the shell.
MS-F and MS-R connectors are designed to
operate in the extreme environmental conditions of high altitude flight and must be completely sealed to withstand moisture, condensation, vibration, corona and flashover
caused by high altitude environments. They
have resilient grommet with internal restrictions in the wire cavities which act as O rings
around the wires. This allows the wires to
slide thru the grommet with a minimum of
friction, yet when the ferrule is seated and
the endbell tightened it provides a perfect
wire seal thru a wide variety of wire diameters. This seal at the rear, plus the interfacial
seal at the front, effects a completely environment-resistant assembly when the plug is
mated to and F or R receptacle. Sockets are of
the closed-entry type.
The temperature range for this connector is 55ºC (67ºF) to +125º (+257ºF) and meets
the requirements of MIL-C-5015.
The F80 modification (crimp contact termination) is available in resilient insulators in the
E, R, F, and BFR styles, creating a large selection of insert assemblies and hardware.
Components are identical to the MS-5015
except that the contacts are modified for
crimp termination providing and inexpensive
crimp contact connector with the proven reliability of and complete intermateability with
the MS-5015 series. Cable clamps have been
integrally designed with the endbell on MS-E
and MS-F connectors. Class R is without the
cable clamp.
MS 3106
CA 3106
18
18
-
1
1
P
S
W
-
*
F80*
PREFIX
SHELL STYLE
CLASS
SHELL SIZE
CONTACT ARRANGEMENT
CONTACT TYPE
ALTERNATE INSERT POSITION
MODIFICATION CODE
PREFIX
MS - Conforms to latest MIL-C-5015
revision.
CA - Cannon designation (for any
modification)
CAR - RoHS compliant
SHELL STYLE
3100 - Wall mounting receptacle
3101 - Cable connecting plug
3102 - Box mounting receptacle
3106 - Straight plug
3108 - 90º angle plug
CLASS
E - with resilient insulator and integral
clamp for cable strain relief
F - same as E, however style 3106 with
O-ring seal under the coupling nut
* When ordering MS3106F to the
Cannon part number, designate CA06R.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
R
F
A-83
SHELL SIZE
10S, 12S, 14S, 16S, 16, 18, 20, 22, 24, 28, 32 and 36.
CONTACT ARRANGEMENTS
See pages A-85 to A-89
CONTACT TYPE
P - Pin
S - Socket
ALTERNATE INSERT POSITION
W, X, Y and Z (omit for “Normal), see page A-89
MODIFICATION CODE
A71 - Electroless Nickel Hardware, RoHS
A176 - Contacts hard gold over nickel, RoHS
A206 - Black zinc cobalt hardware, RoHS
F42 - Connector supplied without endbell, grommet and ferrule
F80 - Snap-in crimp contacts
F183 - Snap-in crimp contacts for metric conductors
DN - CA3106 (plug only), endbell for shrink boot adapter
A232 - Black zinc cobalt hardware,
RoHS European version
A233 - Green zinc cobalt hardware,
European version
A
Circular
ITT Cannon is the foremost manufacturer of MS and
MS type connectors with the widest range of connector styles, sizes and variations in the industry. These
connectors utilize the finest materials, which, along
with precision manufacturing and rigid quality control, assure ITT Cannon customers of the finest quality connectors.
These circular connectors were originally designed
for aircraft, but are now widely used in many other
fields. They are particularly suitable for commercial
applications requiring low cost and high reliability.
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 84
MIL-DTL-5015
MS-E/F/R
Performance and Material Specifications
MATERIALS AND FINISHES
Circular
A
THERMOCOUPLE CONTACTS
Shell
Material
Finish
Aluminum Alloy
O.D. Chromate coating
over cadmium plating
Insulator
Material
Polychloroprene (resilient)
Contacts
Material
Finish
Termination
Brass or copper alloy
Silver plate
Tinned solder pot
WIRING
For class E, F, and R connectors, satisfactory moisture sealing
will be obtained if AWG and MS wire sizes and insulation
outside diameters are governed by this table.
Contact
Size
Wire Size
(MIL-W-5086)
16
12
8
4
0
max.
16 thru 20
12 thru 14
8 thru 10
4 thru 6
0 thru 2
Insulation OD Limit
(inches)
.064 (1.63) min. to .130 (3.30) max.
.114 (2.90) min. to .170 (4.32) max.
.164 (4.17) min. to .255 (6.48) max.
.275 (6.98) min. to .370 (9.40) max.
.415 (10.54) min to .550 (13.97)
ELECTRICAL SERVICE DATA
Test current ratings of contacts and allowable voltage drop
under test conditions when assembled as in service are shown
below. Maximum total current to be carried per connector is the
same as the allowable in wire bundles as specified in MIL-W5088.
Contact
Size
Test Current
(amps)
Potential Drop
(millivolts)
16
12
8
4
0
13
23
46
80
150
49
42
26
23
21
SIzes 12 and 16 contacts, machined from matching thermocouple lead wire alloys, can be supplied in ITT Cannon
connectors. These thermocouple contacts maintain continuity from thermal-sensor leads through a bulkhead of
other closures in temperature measuring applications.
These contacts for matching lead wires are detailed by the standards of the Instrument Society of America (ISA).
ISA Standards
J and Y
K
T
Material
Iron and constantan
Chromel and alumel
Copper and constantan
Since the thermocouple connector applications determines the soldering methods and materials to be used, thermocouple contacts, identified by permanent markings, are normally supplied with untinned solder pots.
Thermocouple contacts are supplied only in connectors having resilient insulators.
HIGH POTENTIAL TEST VOLTAGE
MS connectors show no evidence of breakdown when the test voltage given below is applied between the two
closest contacts and between the shell and the contacts closest to the shell for a period of one minute.
MS
Service
Rating
Test
Voltage
(RMS)
60 cps
Inst.
A
D
E
B
C
1000
2000
2800
3500
4500
7000
Suggested*
Operating Voltages
DC
AC (rms)
250
700
1250
1750
2450
4200
200
500
900
1250
1750
3000
Air
Spacing
Nom.
(inches)
Creepage
Distance
Nom.
(inches)
1/16
1/8
3/16
1/4
5/16
1/16
1/8
3/16
1/4
5/16
1
*As indicated in previous MS specification and to be used by designer only as a guide.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-84
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 85
MIL-DTL-5015
MS-E/F/R
Contact Arrangements (Face View Pin Insert)
LEGEND
Not MS Approved. ITT Cannon Proprietary (see ITT Cannon
designed alternative insert positions, page A-90
¢ High Volume Layouts - readily
available from Cannon Distributors
¢
¢
B
A
B
A
D
C
¢
A
C
A
D
A
C
B
B
C
A
B
C
A
E
A
B
D
14S-1
3 #16
14S-7
3 #16
14S-2
4 #16
14S-5
5 #16
14S-6
6 #16
16-7
2 #16 (A, B)
1 #8 (C)
16-12
1 #4
16-11
2 #12
16S-4
2 #16
Service Rating
A
A
Inst.
Inst.
Inst.
A
A
A
D
¢
¢
A
A
C
C
A
B
B
Shell Size
No. of Contacts
16S-5
3 #16
16S-6
3 #16
16-10
3 #12
Service Rating
A
A
A
E
D
16-9
2 #16 (B,D)
2 #12 (A,C)
A
G
B
C
F
A
B
A
D
B
C
16-13
2 #12
(A-Iron
B-Constantan)
A
¢
E
A
D
B
A
B
C
Shell Size
No. of Contacts
C
14S-9
2 #16
A
14-3
1 #8
A
B
B
B
D
A
¢
F
E
A
B
B
B
12SA10
4 #16
Inst.
12S-3
2 #16
A
12-5
1 #12
D
12S-4
1 #16
D
A
C
A
C
E
¢
¢
D
A
C
A
10SLA4
5 #20
A
10SL-3
3 #16
A
10SL-4
2 #16
A
10S-2
1 #16
A
8S-1
1 #16
A
B
¢
C
A
B
16S-8
5 #16
16S-1
7 #16
18-7
1 #8
18-3
2 #12
A
A
B
D
¢
A
C
D
A
D
C
B
C
B
D
B
A
A
D
C
A
E
A
D
B
C
B
F
E
A
C
B
C
A
D
B
B
C
Shell Size
No. of Contacts
18-5
1 #16(A)
2 #12(B,C)
18-22
3 #16
18-4
4 #16
18-10
4 #12
18-13
3 #12 (B,C,C)
1 #8(A)
Service Rating
D
D
D
A
A
¢
¢
18-15
4 #12
(A, C-Iron;
B, D-Constantan)
A
A
F
G
H
D
A
A
B
J
C
F
C
E
F
E
C
G
C
B
B
B
H
C
A
A
A
B
I
D
B
E
A
A
H
A
F
B
G
18-12
6 #16
¢
G
C
D
E
18-11
5 #12
J
D
K
Shell Size
No. of Contacts
18-8
7 #16(A-G)
1 #12(H)
A
18-9
5 #16(B,C,E-G)
2 #12(A,D)
Inst.
Service Rating
18-1
10 #16
18-19
10 #16
20-2
1 #0
20-23
2 #8
20-3
3 #12
20-19
3 #8
A(B,C,F,G)
Inst. (all others)
A
D
A
D
A
A
B
D
C
H
A
A
D
G
B
J
D
K
E
Shell Size
No. of Contacts
20-4
4 #12
Service Rating
D
20-24
2 #16 (A,C)
2 #8 (B,D)
A
A
P
S
G
20A37
ITT Cannon pos.
#8 of 20-4
D
R
A
F
D
F
E
E
A
E
A
D
E
F
D
D
A
F
B
F
C
G
B
A
C
C
B
D
C
B
C
D
E
20A-48
19 #16
Inst.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
C
E
B
N
V
B
H
D
20A-9
9 #12
D (J)
A (all others)
T
B
C
F
U
J
C
B
M
L
A
C
A-85
20-14
3 #12(C,D,E)
2 #8(A,B)
A
20-8
4 #16(B,C,E,F)
2 #8(A,D)
Inst.
20-17
1 #16(F)
5 #12(A-E)
A
20-22
3 #16(B,D,F)
3 #8(A,C,E)
A
20-15
7 #12
A
Circular
B
Shell Size
No. of Contacts
Service Rating
A
¢
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 86
MS-E/F/R/ER
MIL-C-5015 Connectors
Contact Arrangements (continued)
LEGEND
Circular
A
¢ High Volume Layouts - readily
available from Cannon Distributors
Not MS Approved. ITT Cannon Proprietary (see ITT Cannon
designed alternative insert positions, page A-90
¢
F
A
G
B
H
C
E
J
D
F
Shell Size
No. of Contacts
20-7
8 #16
Service Rating
A(C-F)
D(A,B,G,H)
H
E
B
J
J
B
D
A
22-11
2 #16
22-2
3 #8
Service Rating
B
D
F
A
Service Rating
E
A
P
F
H
E
Shell Size
No. of Contacts
Service Rating
22-27
8 #16(A-H)
1 #8(J)
D(J), A (all others)
B
F
C
D
A
Inst.
A
A
E
A
22-4
2 #12(A,C)
2 #8(B,D)
A
A
C
B
D
A
A
B
E
B
C
D
22-10
4 #16
22-22
4 #8
E
A
G
A
G
A
A
A
H
C
22-12
3 #16(A,C,D)
2 #8(B,E)
D
B
G
H
A
F
J
B
E
D
C
F
F
B
G
B
H
B
H
G
C
E
C
D
C
D
F
22-28
7 #12
22-18
8 #16
22-23
8 #12
A
A(C-E)
D(all others)
D(H)
A(all others)
C
J
E
D
E
22-20
9 #16
22-17
8 #16(A-D,F-J)
1 #12(E)
D(A), A(all others)
A
¢
A
L MA
K
C
D
E
H
R
F
C
D
F
N
A
J
C
E
D
B
C
Shell Size
No. of Contacts
24-27
7 #16
24-6
8 #12
Service Rating
E
D(A,G,H)
A(all others)
G
H
C
D
C
D
K
J
E
24-20
9 #16(A-D,G-L)
2 #12(E,F)
D
B
B
C
K
D
J
24-2
7 #12
24-10
7 #8
D
A
E
G
F
J
J
H
L
M
H
K
M
L
K
K
E
G
F
F
24-19
12 #16
6 #12(B-G)
A
D
E
P
N
R
S
24A24
12 #12
24-5
16 #16
A
A
A
L
B
A
C
D
C
C
H
24-11
6 #12(A-C,G-I)
3 #8(D-F)
A
A
B
L
L
D
F
24-12
3 #12(B,D,E)
2 #4(A,C,)
A
A
M
C
H
G
D
G
E
E
A
B
B
G
D
B
C
D
A
A
E
B
A
B
A
E
24-22
4 #8
A
F
A
F
A
A
B
P
V
S
G
D
B
N
U
T
J
24-9
2 #4
E
D
B
22-14
19 #16
H
G
E
22-7
1 #0
22-19
14 #16
G
A
F
D
20-29
17 #16
F
22-15
1 #16(D)
5 #12(A-C,E,F)
A(A-C,E,F),E(D)
B
N
F
C
E
G F
H
E
B
P
R
S
J
20-27
14 #16
D
M
G
D
D
M
B
E
D
L
J
C
J
K
20-11
13 #16
E
C
¢
J
G
A
N
T
C
L
F
22-9
3 #12
B
C
K
B
G
K
B
K
N
H
C
A
22-5
4 #16(A,C,D,F)
2 #12(B,E)
D
A
H
J
F
M
L
20-33
11 #16
C
F
B
D
22-13
1 #16(E)
4 #12(A-D)
A(A-D), D(E)
H
D
D
D
22-6
1 #16(B)
2 #8(A,C)
D
A
E
B
E
A
A
B
Shell Size
No. of Contacts
E
G
N
B
C
Shell Size
No. of Contacts
L
F
20-18
6 #16(A,C-E,G,H)
3 #12(B,F,I)
A
20-16
7 #16(A-G)
2 #12(H,I)
A
C
C
M
C
C
¢
A
J
L
E
A
D
B
B
M
H
C
A
B
¢
A
K
A
H
F
A
C
D
G
G
E
J
B
C
M
P
N
D
O
I
H
G
E
F
24-7
14 #16(A-M,O)
2 #12(P,N)
A
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-86
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 87
MIL-DTL-5015
MS-E/F/R
Contact Arrangements (continued)
LEGEND
Not MS Approved. ITT Cannon Proprietary (see ITT Cannon
designed alternative insert positions, page A-90
¢ High Volume Layouts - readily
available from Cannon Distributors
F
F
A
A
A
H
A
B
K
F
L
M
R
S
W
D
C
G
N
J
G
V
E
D
D
B
A
B
C
J
G
Q
U
Y
B
B
E
A
B
P
T
X
A
C
H
J
C
C
E
F
C
a
R
Z Y
C
M
K
M
X
D
E
J
G
D
H
N
G Q
E
B
L
L
c W
b
G
D
F
Z
d
A
B
U V
S
H
K
T
J
H
P
F
E
Shell Size
No. of Contacts
24-28
24 #16
28-7
2 #4
28-22
3 #16(D-F)
3 #4(A-C)
28-10
3 #12(A,F,G)
2 #8(B,E)
2 #4(C,D)
28-1
6 #12(A,B,D-F,H)
3 #8(C,J,G)
28A-16
5 #16 (A, D-F, J)
4 #4 (B, C, G, H)
28A-63
9 #12
19 #16
28-19
6 #16(A-C,H,L,M)
4 #12(E,G,J,K)
Service Rating
Inst.
D
D
D(G), A(all others)
D(A,E,J)
A(all others)
A (e)
Inst. (all others)
A (e)
Inst. (all others)
A(C,E,G,J,K,L)
B(H,M),D(A,B)
¢
J
H
J
K
G
J
A
K
A
H
B
L
A
N
E
M
C
G
G
D
N
L
E
L
B
U
M
P
C
V
N
U
V
J
N
K
R
H
M
Q
R
N
D
P
E
F
L
S
C
F
E
M
U
d
J
G
H
28-9
6 #16(A,H-M)
6 #12(B-G)
28-2
12 #16(A,L,N)
2 #12(M,P)
28-20
4 #16(K-N)
10 #12(A-J,P)
28-17
15 #16
28-16
20 #16
28-11
18 #16(A-I, N-X)
4 #12(J-M)
28-12
26 #16
Service Rating
D
D
A
A(A-L), B(R)
D(M-P)
A
A
A
¢
¢
B
A
A
D
J
H
R
P
X
K
e
b
a
f
N
V
U
g
j
W
c
h
k
l
j
h
p
n
k
r
W Y
V
d
m
e
t
m
Z
n
u
h
p
v
b
a
g
f
m
l
s
w
Q
P
W
B
E
C
k
t
r
y
Shell Size
No. of Contacts
28-15
35 #16
28-21
37 #16
28A51
43 #16
32-17
4 #4
Service Rating
A
For MIL equip
design, use 28-21
A
A
D
T
a
v
AA
A
D
AB
AK
E
C
AC
F
G
H
D
H
AM AN AP AQ AR
AS AT
AU AV AW
C
B
C
e
n
m
AJ
B
V
d
b
AH
AF
N
U
k
j
u
AE
AD
D
Z
A
G
M
L
S
h
g
p
B
s
F
E
K
R
Y
X
f
c
j
r
J
H
A
F
L M N P R
K
S T U V W X Z
f
a b c d e
g
D
A B C D E
G H J K L
M N P R S T U
D
C
A
A B C D
E F G H J
G
M
L
T
Z
Y
d
B
F
E
S
E
F
Shell Size
No. of Contacts
C
D
V
W
X
K
I
C
T
b
Y
L
D
T
a
Z
M
H
B
S
N
B
X
G
A
A
R
P
G
W
D
E
T
S
P
F
A
F
R
D
F
J
L
C
K
E
K
A
P
M
C
F
J
H
G
P
H
L
M
B
B
K
B
D
C
E
32-1
3 #12(A,C,D)
2 #0(B,E)
E(A),D(all others)
32A-69
41 #20
20 #16
Inst.
L
K
M
N
32-9
12 #16(C-N)
2 #4(A,B)
D
32-15
2 #0(A,G)
6 #12(B,C,D,E,F,H)
D
A
A
A
A
E
G
H
L
Y
F
c
N
M
R
P
V
U
X
N
U
d
V
b
W
X
Shell Size
No. of Contacts
32-5
2#0
Service Rating
D
32-6
16 #16(A-O,S)
2 #12(U,V)
3 #8(P,R,T)
2 #4(W,X)
A
I
A
E
B
F
K
R
G
e
j
P
R
S
Y
Z
k
C
W
X
d
h
J
S
c
D
P
a
e
H
O
Z
S
T
W
M
T
D
J
I
K
O
B
B
C
T
f
a
g
U
b
L
V
H
F
A
G
B
C
H
N
D
I
O
J
O
P
W
X
e
K
g
f
m
n
s
p
k
q
u
x
V
v
C
B
d
c
b
j
h
t
U
T
a
Z
N
M
L
S
R
Y
G
F
l
r
w
y
32-8
24 #16(A-L,T-Z,a-e)
6 #12(M-S)
2 #8(O,R)
32-7
28 #16(A-N,W-Z,a-k)
7 #12(O-V)
32A47
47 #16
32A10
54 #16
36-4
3 #0
A
For new MIL equip.
design, use 32-7
Inst. (A,B,h,j)
A(all others)
A
A
A(B,C),C(A)
*NOTE: Additional layouts are the same as shown but in unique alternate positioins. Please consult the factory.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
K
M
E
D
C
E
L
B
A
J
A-87
G
F
J
l
AL
Circular
E
A
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 88
MS-E/F/R/ER
MIL-C-5015 Connectors
Contact Arrangements (continued)
A
¢ High Volume Layouts - readily
available from Cannon Distributors
Not MS Approved. ITT Cannon Proprietary (see ITT Cannon
designed alternative insert positions, page A-90
A
A
Circular
A
J
B
F
B
I
D
E
C
F
Q
N
H
C
L
N
M
X
P
G
S
U
f
36-6
4 #4(B,C,E,F)
2 #0(A,D)
36-14
6 #16(K-N,P,Q)
5 #12(B,D,F,H,J)
5 #8(A,C,E,G,I)
Service Rating
A
A
D
36-9
14 #16(A-G,Z-f)
14 #12(H-N,S-Y)
2 #8(O,R)
1 #4(P)
A
36A46
27 #12
36A16
18 #12
(B,C,V,J,K,M,N,
R, T-Iron; A,D-F,H,L
P,S,U-Constantan)
A
T
Q
k
c
P
U
W
K
V
G
D(m), A (all others)
m
f
Y
n
s
v
x
t
H
C
k
A
†
u
z
O
R
E
D
K
J
Z
P
Q
W
V
T
Z
Y
X
e
h
j
e
d
r
t
w
y
m
36-8
46 #16(A-X,Z-z
1 #12(Y)
A
P
s
u
x
g
w
v
AB
h
V
Z
j
s
t
t
z
r
s
AG
y
A
d
T
b
c
m
n
x
AF
AJ
l
v
w
k
u
AC AB
AE AD
AK
A
K
U
V
e
p
z
AA
AA
AF AG
36A34
52 #16
L
W
f
D
M
j
r
36-10
48 #16
E
F
N
X
Y
g
h
A
G
P
R
a
b
i
y
x
S
a
AC AD AE
z
U
q
p
H
J
M
Z
f
n
L
T
S
Y
m
E
D
K
R
d
c
k
C
J
X
c
k
r
w
v
u
b
B
H
N
U
i
h
q
p
n
t
a
g
f
y
36-7
40 #16(A-Z,a-s)
7 #12(t-z)
A
F
N
M
S
R
A
G
F
L
W
a
B
C
B
V
U
p
H
L
P
d
c
g
m
v
z
T
X
b
k
K
M
O
S
s
x
Service Rating
W
g
f
w
r
36-15
35 #16
c
p
H
Shell Size
No. of Contacts
N
X
n
F
T
C
F
E
J
I
b
j
i
u
Y
J
W
e
d
N
S
R
A
D
G
J
M
a
Z
h
X
Z
L
P
B
G
I
L
K
Y
E
g
h
a
M
O
D
f
b
E
F
H
V
m
j
N
e
A
D
C
C
U
d
B
A
B
G
N
¢
A
L
c
c
T
36-5
4 #0
S
C
F
E
Shell Size
No. of Contacts
R
B
K
R
X
d
H
W
b
Y
Z
e
A
P
Y
D
F
E
J
V
T
U
a
D
I
O
a
d
K
L
V
b
U
T
D
M
F
M
W
C
R
N
R
M
A
G
H
e
L
K
S
J
H
I
J
E
G
C
Z
D
C
K
P
B
S
D
E
B
A
AM
36A66
52 #16(A-c,h-AK)
4 #12(d,e,f,g)
A
†
1
24
B
A
M
F
21
20
C
N
39
59
57
58
36
45
6
31
14
u
AC AD
40A33
7 #8(G-N)
6 #4(A-F)
Service Rating
A
40-10
16 #16(A,B,E-H,M,N,P
Q,V-Y,b,c)
9 #8(C,D,I,L,O,R,U,Z,a)
4 #4(K,J,S,T)
A
v
AZ
m
AJ
W
f
g
q
p
y
AE AF AG
M
V
d
n
x
r
AA
z
BD BE
BF
BM BN BP
BS BT
s
AB
AK AL AM AN
AU AV AW AX
AT
BA BB BC
BJ BK BL
12
L
U
c
b
w
AP AR AS
98
10
11
13
Shell Size
No. of Contacts
k
D
K
T
a
Z
j
t
8
32
33
Y
i
7
30
48
34
15
h
29
47
49
35
16
28
46
50
37
17
D
56
51
18
K
E
60
X
C
J
S
R
P
5
44
52
38
N
27
55
53
19
J
43
54
40
H
L
41
4
H
F
E
3
26
42
B
A
2
25
23
22
G
AY
BG
BR
BU BV
40A27
60 #16
40-56
85 #16
A
A
A
B
A
C
B
H
E
D
J
S
G
F
L
M
I
H
P
O
N
J
K
q
AA
T
U
V
W
X
r
AB
a
c
b
e
d
AX
j
h
o
p
m
k
r
s
f
n
AC
AN
AE
BJ
BS
AQ
BA
BK
D
AR
b
p
n
m
x
AG AH
AS
AT
BC
y
z
AJ
AK
AU
BD
BM
BU
AV
BE
AL
AW
BF
BG
BM
BL
BT
BV
BP
BQ
BW
BR
BX
CA
BZ
CD
CC
Service Rating
AF
a
k
w
R
Q
Z
j
v
BB
BY
44-1
36 #16(A-S,Z-t
6 #12(T-Y)
G
P
Y
h
u
AD
F
N
X
g
t
AP
AZ
t
Shell Size
No. of Contacts
W
f
s
AY
BH
g
V
E
M
Y
AM
Z
D
L
U
e
d
S
R
T
c
C
K
CB
CE
48-5
90 #16(A-BL,BN-BT,BW,BX)
1 #8(CD)
9 #12(BM,BU,BV,BY-CC,CE)
A
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-88
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 89
MIL-DTL-5015
MS-E/F/R
MS Alternate Insert Positions
All views are looking into front of pin insert of rear of socket insert.
A
B
A
Contact
Shell Arrange- Wire
Size
ment Size Service Rating
8S
8S-1 1 #16
A
10S 10S-2 1 #16
A
10SL-4 2 #16
A
10SL-3 3 #16
A
12
12-5 1 #12
D
12S 12S-4 1 #16
D
12S-3 2 #16
A
14
14-3 1 #8
A
14S 14S-1 3 #16
A
14S-2 4 #16
Inst.
14S-5 5 #16
Inst.
14S-6 6 #16
Inst.
14S-7 3 #16
A
14S-9 2 #16
A
16
16-7 2#16
A
1#8
16-9 2 #16
A
2 #12
16-10 3 #12
A
16-12 1 #4
A
16-11 2 #12
A
16-13 2 #12
A
16S 16S-1 7 #16
A
16S-4 2 #16
D
16S-5 3 #16
A
16S-6 3 #16
A
16S-8 5 #16
A
18
18-1 10 #16 A(B,C,F,G)
Inst.(all others)
18-3 2 #12
D
18-4 4 #16
D
18-5 1 #16
D
2 #12
18-7 1 #8
B
18-8 7 #16
A
1 #12
18-9 5 #16
Inst.
2 #12
18-10 4 #12
A
18-11 5 #12
A
18-12 6 #16
A
18-13 3 #12
A
1 #8
18-15 4 #12
A
18-19 10 #16
A
18-22 3 #16
D
20
20-2 1 #0
D
20-3 3 #12
D
20-4 4 #12
D
20-7 8 #16
A(C-F)
D(A,B,G,H)
20-8 4 #16
Inst.
2 #8
20-14 3 #12
A
2 #8
20-15 7 #12
A
20-16 7 #16
A
2 #12
20-17 1 #16
A
5 #12
20-18 6 #16
A
3 #12
20-19 3 #8
A
A
A
B
Normal Position
Position W
W
70
90
70
80
Alternate Positions
Degrees
X
Y
Z
145 215 290
120 240
110
180 270
145 215 290
110 250 280
35
110
250
325
90
35
35
80
35
70
90
70
180
110
110
110
145
180
170
145
270
250
250
250
215
270
265
215
325
325
280
325
290
290
35
35
80
110
110
110
250
250
250
325
325
280
70
-
-
290
80
110
250
280
80
80
120
170
110
240
265
250
280
280
70
70
45
80
120
120
145
145
110
110
240
240
215
215
250
250
290
290
280
80
110
250
280
80
110
250
280
80
80
110
250
280
280
90
180
270
-
35
110
250
325
90
180
270
-
Position X
Contact
Shell Arrange- Wire
Size
ment Size Service Rating
20
20-22 3 #16
A
3 #8
20-23 2 #8
A
20-24 2 #16
A
2 #8
20-27 14 #16
A
20-29 17 #16
A
20-33 11 #16
A
22
22-2 3 #8
D
22-4 2 #12
A
2 #8
22-5 4 #16
D
2 #12
22-6 1 #16
D
2 #8
22-7 1 #0
E
22-9 3 #12
E
22-10 4 #16
E
22-11 2 #16
B
22-12 3 #16
D
2 #8
22-13 1 #16
A(A-D)
4 #12
D(E)
22-14 19 #16
A
22-15 1 #16 A(A-C,E,F)
5 #12
E(D)
22-17 8 #16
D(A)
1 #12 A(all others)
22-18 8 #16
A(C-E)
D(all others)
22-19 14 #16
A
22-20 9 #16
A
22-22 4 #8
A
22-23 8 #12
D(H)
A(all others)
22-27 8 #16
D(J)
1 #8 A(all others)
22-28 7 #12
A
24
24-2 7 #12
D
24-5 16 #16
A
24-6 8 #12 D(A,G,H)
A(all others)
24-7 14 #16
A
2 #12
24-9 2 #4
A
24-10 7 #8
A
24-11 6 #12
A
3 #8
24-12 3 #12
A
2 #4
24-20 9 #16
D
2 #12
24-22 4 #8
D
24-27 7 #16
E
24-28 24 #16
Inst.
28
28-1 6 #12
D(A,E,J)
3 #8 A(all others)
28-2 12 #16
D
2 #12
28-7 2 #4
D
28-9 6 #16
6 #12
D
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A-89
W
80
Position Y
Alternate Positions
Degrees
X
Y
Z
110 250 280
35
35
110
110
250
250
325
325
35
80
70
35
110
145
110
250
215
250
325
280
290
325
35
110
250
325
80
110
250
280
70
35
35
80
145
110
110
110
215
250
250
250
290
325
325
280
35
110
250
325
80
80
110
250
280
280
80
110
250
280
80
110
250
280
80
35
35
110
110
110
-
250
250
250
250
280
325
-
80
-
250
280
80
80
80
80
110
110
250
250
280
280
280
280
80
110
250
280
35
80
35
110
110
250
250
325
280
325
80
110
250
280
80
110
250
280
45
80
80
80
110
110
110
250
250
250
280
280
280
35
110
250
325
35
80
110
110
250
250
325
280
Contact
Shell Arrange- Wire
Size
ment Size Service Rating
28
28-10 3 #12
D(G)
2 #8 A(all others)
2 #4
28-11 18 #16
A
4 #12
28-12 26 #16
A
28-15 35 #16
A
28-16 20 #16
A
28-17 15 #16 A(A-L),B(R)
D(M-P)
28-19 6 #16 A(C,E,G,J,K,L)
4 #12 B(H,M), D(A,B)
28-20 4 #16
A
10 #16
28-21 37 #16
A
28-22 3 #16
D
3 #4
32
32-1 3 #12
E(A)
2 #0 D(all others)
32-5 2 #0
D
32-6 16 #16
A
2 #12
3 #8
2 #4
32-7 28 #16 Inst.(A,B,h,j)
7 #12 A(all others)
32-8 24 #16
A
6 #12
32-9 12 #16
D
2 #4
32-15 2 #0
D
6 #12
32-17 4 #4
D
36
36-4 3 #0
A(B,C)
D(A)
36-5 4 #0
A
36-6 4 #4
A
2 #0
36-7 40 #16
A
7-12
36-8 46 #16
A
1 #12
36-9 14 #16
A
14 #12
2 #8
1 #4
36-10 48 #16
A
36-14 6 #16
D
5 #12
5 #8
36-15 35 #16
D(m)
A(all others)
40
40-10 16 #16
A
9 #8
4 #4
40-56 85 #16
A
44
44-1 36 #16
D
6 #12
48
48-5 90 #16
A
1 #8
9 #12
Position Z
W
80
Alternate Positions
Degrees
X
Y
Z
110 250 280
80
110
250
280
90
80
80
80
180
110
110
110
270
250
250
250
280
280
280
80
110
250
280
80
110
250
280
80
70
110
145
250
215
280
290
80
110
250
280
80
80
110
110
250
250
325
280
80
125
235
280
80
125
235
280
80
110
250
280
35
110
250
280
45
70
110
145
250
215
290
35
120
110
240
250
325
80
110
250
280
80
110
250
280
80
125
235
280
80
90
125
180
235
270
280
-
60
125
245
305
65
125
225
310
72
65
144
125
216
225
288
310
65
125
225
310
Circular
B
B
B
A
A
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 90
MS-E/F/R/ER
MIL-C-5015 Connectors
ITT Cannon Designated Alternate Insert Positions
Not MS approved.
A
Circular
2
20
17
12
4
9
8,13
11
6
22
19
5,3
15
21
18
16
14
NOTE: Front view of pin insulator rotates as shown.
Shell
Size
Contact
Arrangement
Wire
Size
Service
Rating
20
20A-9
9#12
20
28
20A-48
28A-16
28
28A-63
32
32A-69
19#16
5#16
4#4
9#12
19#16
41#20
20#16
20
21
22
23
24
25
26
D (J)
A (all others)
Inst.
A (e)
Inst (all others)
A (e)
Inst (all others)
Inst
220
255
290
165
330
235
125
Available
Position
4
9
2
12
3
8
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-90
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 91
MIL-DTL-5015 Connectors
MS-E/F/R
Wall Mounting Receptacle
MS3100E / MS3100F
Integral Cable Clamp
CA3100E / CA3100E
MS3100E is identical to
MS3100F and is available upon
request. For new equipment,
customer should specify
MS3100F.
MS3100R
CA3100R
A
L
M
K
W
S
Typ.
The MS3100R receptacle is
identical in purpose to the
MS3100F. The MS3100R
features a shorter light
weight endbell and mates
with 3106 and 3108 plugs.
E
V
R
Typ.
A Thd.
B
T Dia.
4 Mtg. Holes
L1
S Typ.
M
K
R Typ.
P
A Thd.
B
T Dia.
4 Mtg. Holes
Shell
Size
8S
10S
10SL
12S
14S
16S
12
14
16
18
20
22
24
28
32
36
40
B
E
E
Min.
Max.
Min.
.375 (9.53)
.235 (5.97)
.102 (2.59)
.375 (9.53)
.235 (5.97)
.102 (2.59)
.375 (9.53)
.297 (7.54)
.140 (3.56)
.375 (9.53)
.297 (7.54)
.140 (3.56)
.375 (9.53) .422 (10.72) .195 (4.95)
.375 (9.53) .547 (13.89) .255 (6.48)
.625 (15.88) .297 (7.54)
.140 (3.56)
.625 (15.88) .422 (10.72) .195 (4.95)
.625 (15.88) .547 (13.89) .255 (6.48)
.625 (15.88) .610 (15.49) .285 (7.24)
.625 (15.88) .735 (18.67) .350 (8.89)
.625 (15.88) .740 (18.80) .350 (8.89)
.625 (15.88) .922 (23.42) .468 (11.89)
.625 (15.88) .922 (23.42) .468 (11.89)
.625 (15.88) 1.235 (31.37) .664 (15.87)
.625 (15.88) 1.360 (34.54) .694 (17.63)
.625 (15.88) 1.628 (41.35) .911 (23.14)
K
L
L1
Max.
Max.
Max.
.125 (3.18) 2.250 (57.15) 1.838 (46.69)
.125 (3.18) 2.250 (57.15) 1.838 (46.69)
.125 (3.18) 2.250 (57.15) 1.838 (46.69)
.140 (3.56) 2.250 (57.15) 1.838 (46.69)
.140 (3.56) 2.250 (57.15) 1.838 (46.69)
.140 (3.56) 2.250 (57.15) 1.838 (46.69)
.146 (3.71) 2.625 (66.68) 2.181 (55.40)
.146 (3.71) 2.625 (66.68) 2.181 (55.40)
.146 (3.71) 2.625 (66.68) 2.181 (55.40)
.180 (4.57) 2.688 (68.28) 2.181 (55.40)
.180 (4.57) 2.750 (69.85) 2.181 (55.40)
.180 (4.57) 2.750 (69.85) 2.181 (55.40)
.203 (5.16) 2.969 (75.44) 2.181 (55.40)
.203 (5.16) 3.031 (76.99) 2.181 (55.40)
.203 (5.16) 3.031 (76.99) 2.322 (58.98)
.203 (5.16) 3.281 (84.34) 2.322 (58.98)
.203 (5.16) 3.560 (89.66)† 2.427 (61.65)†
E
+.031
-.000
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.750 (19.05)
.750 (19.05)
.750 (19.05)
.750 (19.05)
.750 (19.05)
.750 (19.05)
.812 (20.62)
.812 (20.62)
.875 (22.23)
.875 (22.23)
.875 (22.23)
P
Max.
.890 (22.61)
.890 (22.61)
.970 (24.64)
.970 (24.64)
1.150 (29.21)
1.250 (31.75)
.970 (24.64)
1.150 (29.21)
1.250 (31.75)
1.450 (36.83)
1.570 (39.88)
1.570 (39.88)
1.880 (47.75)
1.880 (47.75)
2.205 (56.01)
2.400 (60.96)
2.840 (72.14)
R
± .005
.594 (15.09)
.719 (18.26)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.93)
1.562 (39.67)
1.750 (44.45)
1.938 (49.23)
2.188 (55.58)
S
± .031
.875 (22.23)
1.000 (25.40)
1.000 (25.40)
1.094 (27.79)
1.188 (30.18)
1.281 (32.54)
1.094 (27.79)
1.188 (30.18)
1.281 (32.54)
1.375 (34.93)
1.500 (38.10)
1.625 (41.28)
1.750 (44.45)
2.000 (50.80)
2.250 (57.15)
2.500 (63.50)
2.750 (69.85)
T
+ .010
- .005
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.147 (3.73)
.147 (3.73)
.173 (4.39)
.173 (4.39)
.173 (4.39)
V
Max.
.840 (21.34)
.840 (21.34)
.900 (22.86)
.900 (22.86)
1.100 (27.94)
1.200 (30.48)
.900 (22.86)
1.100 (27.94)
1.200 (30.48)
1.300 (33.02)
1.500 (38.10)
1.500 (38.10)
1.740 (44.20)
1.740 (44.20)
2.075 (52.71)
2.300 (58.42)
2.688 (68.28)
W
Max.
1.046 (26.57)
1.046 (26.57)
1.125 (28.58)
1.125 (28.58)
1.343 (34.11)
1.484 (37.69)
1.125 (28.58)
1.343 (34.11)
1.484 (37.69)
1.609 (40.87)
1.890 (48.01)
1.890 (48.01)
2.170 (55.12)
2.170 (55.12)
2.656 (67.46)
2.922 (74.22)
-
† Not to MS specification
Performance Specifications - Page A-84
Contact, Ceiling Plugs, Assembly Tools - Page A-105
Contact Arrangements - Page A-85 – A-89
Shell Size
8S
10S
10SL
12S
14S
16S
12
14
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A-91
A Thread
1/2-28UNEF-2A
5/8-24UNEF-2A
5/8-24UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
1-20UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
Shell Size
16
18
20
22
24
28
32
36
40
A Thread
1-20UNEF-2A
1-1/8-18UNEF-2A
1-1/4-18UNEF-2A
1-3/8-18UNEF-2A
1-1/2-18UNEF-2A
1-3/4-18UNS-2A
2-18UNS-2A
2-1/4-16UN-2A
2-1/2-16UN-2A
Circular
MS3100F wall mounting
receptacles are used to carry
wires thru walls or bulkheads,
or to provide a means of
disconnection at a bulkhead.
MS3100F receptacles mate
with 3106 and 3108 plugs.
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 92
MIL-DTL-5015
MS-E/F/R
Cable Connecting Plug (Receptacle with no mounting flange)
CA3101E / CA3101E
Circular
A
MS3101E / MS3101F
Integral Cable Clamp
MS3101E cable connecting
plugs are used for cable
extension requirements,
where mounting provisions
are unnecessary.
MS3101E receptacle mate
with 3106, and 3108 plugs.
L
W
CA3101R
K
V
G
E
A Thd.
Note: MIL-C-5015 has
changed the nomenclature
of the 3101 from Receptacle
to Plug.
MS3101R
M
S1
B
P
MS3101R cable connecting
plug is identical in purpose to
the MS3101E. The MS3101R
features a shorter light
weight endbell and mates
with 3106, and 3108 plugs.
L1
S1
M
K
P
G
A Thd.
B
Shell
Size
8S
10S
10SL
12S
14S
16S
12
14
16
18
20
22
24
28
32
36
40
B
Min.
.375 (9.53)
.375 (9.53)
.375 (9.53)
.375 (9.53)
.375 (9.53)
.375 (9.53)
.625 (15.88)
.625 (15.88)
.625 (15.88)
.625 (15.88)
.625 (15.88)
.625 (15.88)
.625 (15.88)
.625 (15.88)
.625 (15.88)
.625 (15.88)
.625 (15.88)
E
Max.
.235 (5.97)
.235 (5.97)
.297 (7.54)
.297 (7.54)
.422 (10.72)
.547 (13.89)
.297 (7.54)
.422 (10.72)
.547 (13.89)
.610 (15.49)
.735 (18.67)
.740 (18.80)
.922 (23.42)
.922 (23.42)
1.235 (31.37)
1.360 (34.54)
1.628 (41.35)
E
Min.
.102 (2.59)
.102 (2.59)
.140 (3.56)
.140 (3.56)
.195 (4.95)
.255 (6.48)
.140 (3.56)
.195 (4.95)
.255 (6.48)
.285 (7.24)
.350 (8.89)
.350 (8.89)
.468 (11.89)
.468 (11.89)
.664 (15.87)
.694 (17.63)
.911 (23.14)
G
Max.
.844 (21.44)
.969 (24.61)
1.062 (26.97)
1.062 (26.97)
1.156 (29.36)
1.281 (32.54)
1.062 (26.97)
1.156 (29.36)
1.281 (32.54)
1.344 (34.14)
1.500 (38.10)
1.625 (41.28)
1.750 (44.45)
2.000 (50.80)
2.250 (57.15)
2.500 (63.50)
2.750 (69.85)
K
Max.
.125 (3.18)
.125 (3.18)
.125 (3.18)
.140 (3.56)
.140 (3.56)
.140 (3.56)
.146 (3.71)
.146 (3.71)
.146 (3.71)
.180 (4.57)
.180 (4.57)
.180 (4.57)
.203 (5.16)
.203 (5.16)
.203 (5.16)
.203 (5.16)
.203 (5.16)
L
Max.
2.250 (57.15)
2.250 (57.15)
2.250 (57.15)
2.250 (57.15)
2.250 (57.15)
2.250 (57.15)
2.625 (66.68)
2.625 (66.68)
2.625 (66.68)
2.688 (68.28)
2.750 (69.85)
2.750 (69.85)
2.969 (75.44)
3.031 (76.99)
3.031 (76.99)
3.281 (84.34)
3.560 (89.66)†
M
L1
+.031 (0.79)
Max.
-.000 (0.00)
1.838 (46.69) .562 (14.27)
1.838 (46.69) .562 (14.27)
1.838 (46.69) .562 (14.27)
1.838 (46.69) .562 (14.27)
1.838 (46.69) .562 (14.27)
1.838 (46.69) .562 (14.27)
2.181 (55.40) .750 (19.05)
2.181 (55.40) .750 (19.05)
2.181 (55.40) .750 (19.05)
2.181 (55.40) .750 (19.05)
2.181 (55.40) .750 (19.05)
2.181 (55.40) .750 (19.05)
2.181 (55.40) .812 (20.62)
2.181 (55.40) .812 (20.62)
2.322 (58.98) .875 (22.23)
2.322 (58.98) .875 (22.23)
2.427 (61.65)† .875 (22.23)
P
Max.
.890 (22.61)
.890 (22.61)
.970 (24.64)
.970 (24.64)
1.150 (29.21)
1.250 (31.75)
.970 (24.64)
1.150 (29.21)
1.250 (31.75)
1.450 (36.83)
1.570 (39.88)
1.570 (39.88)
1.880 (47.75)
1.880 (47.75)
2.205 (56.01)
2.400 (60.96)
2.840 (72.14)
S1
Max.
.515 (13.08)
.640 (16.26)
.640 (16.26)
.765 (19.43)
.890 (22.61)
1.015 (25.78)
.765 (19.43)
.890 (22.61)
1.015 (25.78)
1.140 (28.96)
1.265 (32.13)
1.390 (35.31)
1.515 (38.48)
1.765 (44.83)
2.015 (51.18)
2.270 (57.66)
2.427 (61.65)
V
Max.
.840 (21.34)
.840 (21.34)
.900 (22.86)
.900 (22.86)
1.100 (27.94)
1.200 (30.48)
.900 (22.86)
1.100 (27.94)
1.200 (30.48)
1.300 (33.02)
1.500 (38.10)
1.500 (38.10)
1.740 (44.20)
1.740 (44.20)
2.075 (52.71)
2.300 (58.42)
2.688 (68.28)
W
Max.
1.046 (26.57)
1.046 (26.57)
1.125 (28.58)
1.125 (28.58)
1.343 (34.11)
1.484 (37.69)
1.125 (28.58)
1.343 (34.11)
1.484 (37.69)
1.609 (40.87)
1.890 (48.01)
1.890 (48.01)
2.170 (55.12)
2.170 (55.12)
2.656 (67.46)
2.922 (74.22)
-
† Not to MS specification
Performance
Specifications
- Page XXX
Performance
Specifications
- Page A-84
Shell Size
8S
10S
10SL
12S
14S
16S
12
14
Contact,
Ceiling
Plugs,Plugs,
Assembly
Tools - Page
A-105- Page XXX
Contact,
Ceiling
Assembly
Tools
A Thread
1/2-28UNEF-2A
5/8-24UNEF-2A
5/8-24UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
1-20UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
Shell Size
16
18
20
22
24
28
32
36
40
A Thread
1-20UNEF-2A
1-1/8-18UNEF-2A
1-1/4-18UNEF-2A
1-3/8-18UNEF-2A
1-1/2-18UNEF-2A
1-3/4-18UNS-2A
2-18UNS-2A
2-1/4-16UN-2A
2-1/2-16UN-2A
Contact Arrangements - Page A-85 – A-89
Contact Arrangements - Page XXX
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-92
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 93
MIL-DTL-5015 Connectors
MS-E/F/R
Box Mounting Receptacle
MS3102E / MS3102R
CA3102E / CA3102R
S
A
R
0
.971
.909
.846
Circular
MS3102E and MS3102R box mounting receptacles are used in
junction boxes or as an integral part of equipment. These
connectors are identical in construction and will mate with
3106 and 3108 plugs. For new equipment, customers should
specify MS3102R.
Shell Size
8S, 10S, 10SL
12S, 14S, 16S
12
14
16
18
20, 22
24, 28
32, 36
X DIMENSION
Max. Solder Pot Ext. - Pin or Socket
Contact Size
16
12
8
4
.534
.518
.705
.705
.705
.705
.767
.705
.705
.767
.767
.674
.674
.736
.736
.674
.674
.736
.736
.612
.612
.674
.674
.549
.549
.611
.611
L
T Dia.
4 Mtg. Holes
M
K
P
A Thd.
(Class-2A)
B
X
Max. Solder
Pot Extension
Straight Plug
MS3106E / MS3106F
CA3106E / CA3106E
MS3106F straight plugs mate
with 3100, 3102 and 3102
receptacles.
MS3106E is available upon
request. For new equipment,
customer should specify
MS3106F. MS3106E is identical
to MS3106F except to O-ring
under the coupling nut.
MS3106R
Shell
Size
8S
10S
10SL
12S
14S
16S
12
14
16
18
20
22
24
28
32
36
40
CA3106R
E
Max.
.235 (5.97)
.235 (5.97)
.297 (7.54)
.297 (7.54)
.422 (10.72)
.547 (13.89)
.297 (7.54)
.422 (10.72)
.547 (13.89)
.610 (15.49)
.735 (18.67)
.740 (18.80)
.922 (23.42)
.922 (23.42)
1.235 (31.37)
1.360 (34.54)
1.628 (41.35)
E
Min.
.102 (2.59)
.102 (2.59)
.140 (3.56)
.140 (3.56)
.195 (4.95)
.255 (6.48)
.140 (3.56)
.195 (4.95)
.255 (6.48)
.285 (7.24)
.350 (8.89)
.350 (8.89)
.468 (11.89)
.468 (11.89)
.664 (15.87)
.694 (17.63)
.911 (23.14)
J**
Max.
.536 (13.61)
.536 (13.61)
.536 (13.61)
.536 (13.61)
.536 (13.61)
.536 (13.61)
.724 (18.39)
.724 (18.39)
.724 (18.39)
.724 (18.39)
.724 (18.39)
.724 (18.39)
.724 (18.39)
.724 (18.39)
.724 (18.39)
.724 (18.39)
.724 (18.39)
W
L
Max.
2.250 (57.15)
2.250 (57.15)
2.250 (57.15)
2.250 (57.15)
2.250 (57.15)
2.250 (57.15)
2.625 (66.68)
2.625 (66.68)
2.625 (66.68)
2.688 (68.28)
2.750 (69.85)
2.750 (69.85)
2.969 (75.44)
3.031 (76.99)
3.031 (76.99)
3.281 (84.34)
3.560 (89.66)†
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-93
A Thd.
L1
Max.
1.838 (46.69)
1.838 (46.69)
1.838 (46.69)
1.838 (46.69)
1.838 (46.69)
1.838 (46.69)
2.181 (55.40)
2.181 (55.40)
2.181 (55.40)
2.181 (55.40)
2.181 (55.40)
2.181 (55.40)
2.181 (55.40)
2.181 (55.40)
2.322 (58.98)
2.322 (58.98)
2.427 (61.65)†
E
P1
V
MS3106R straight plug is
identical in purpose to the
MS3106F. The MS3106R has
the shorter endbell. This plug
will mate with 3100, 3101, and
3102 receptacles.
† Not to MS specification
www.ittcannon.com
L
J**
P1
L1
J**
A
N
Max.
.890 (22.61)
.890 (22.61)
.970 (24.64)
.970 (24.64)
1.150 (29.21)
1.250 (31.75)
.970 (24.64)
1.150 (29.21)
1.250 (31.75)
1.450 (36.83)
1.570 (39.88)
1.570 (39.88)
1.880 (47.75)
1.880 (47.75)
2.205 (56.01)
2.400 (60.96)
2.840 (72.14)
P1
Max.
.844 (21.44)
.969 (24.61)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.344 (34.14)
1.469 (37.31)
1.594 (40.49)
1.719 (43.66)
1.969 (50.01)
2.219 (56.36)
2.469 (62.71)
2.723 (69.16)†
N
V
Max.
.840 (21.34)
.840 (21.34)
.900 (22.86)
.900 (22.86)
1.100 (27.94)
1.200 (30.48)
.900 (22.86)
1.100 (27.94)
1.200 (30.48)
1.300 (33.02)
1.500 (38.10)
1.500 (38.10)
1.740 (44.20)
1.740 (44.20)
2.075 (52.71)
2.300 (58.42)
2.688 (68.28)
W
Max.
1.046 (26.57)
1.046 (26.57)
1.125 (28.58)
1.125 (28.58)
1.343 (34.11)
1.484 (37.69)
1.125 (28.58)
1.343 (34.11)
1.484 (37.69)
1.609 (40.87)
1.890 (48.01)
1.890 (48.01)
2.170 (55.12)
2.170 (55.12)
2.656 (67.46)
2.922 (74.22)
-
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 94
MIL-DTL-5015 Connectors
MS-E/F/R
Straight Plug (continued)
A
Shell Size
8S
10S
10SL
12S
14S
16S
12
14
Performance Specifications - Page A-84
Contact, Ceiling Plugs, Assembly Tools - Page A-105
Circular
Contact Arrangements - Page A-85 – A-89
A Thread
1/2-28UNEF-2A
5/8-24UNEF-2A
5/8-24UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
1-20UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
Shell Size
16
18
20
22
24
28
32
36
40
A Thread
1-20UNEF-2A
1-1/8-18UNEF-2A
1-1/4-18UNEF-2A
1-3/8-18UNEF-2A
1-1/2-18UNEF-2A
1-3/4-18UNS-2A
2-18UNS-2A
2-1/4-16UN-2A
2-1/2-16UN-2A
90° Angle Plug
MS3108E / MS3108R
CA3108E / CA3108R
MS3108R 90° angle plugs with O-ring
seal (less cable clamp) and the
MS3108E 90° angle plugs (less O-ring
seal with cable clamp) are used where
there is limited space and where wires
must be brought at abrupt angles.
These plugs will mate with 3100,
3101 and 3102 receptacles.
P
1
L3
Y
J**
A Thd.
(Class-2B)
X
1
Thread for
Attachment
of M85049/41
(MS3057)
Cable Clamp
End of
Thread
(MS3108R)
Shell
Size
8S
10S
10SL
12S
14S
16S
12
14
16
18
20
22
24
28
32
36
40
B
Min.
.375 (9.53)
.375 (9.53)
.375 (9.53)
.375 (9.53)
.375 (9.53)
.375 (9.53)
.625 (15.88)
.625 (15.88)
.625 (15.88)
.625 (15.88)
.625 (15.88)
.625 (15.88)
.625 (15.88)
.625 (15.88)
.625 (15.88)
.625 (15.88)
.625 (15.88)
J**
Max.
.536 (13.61)
.536 (13.61)
.536 (13.61)
.536 (13.61)
.536 (13.61)
.536 (13.61)
.724 (18.39)
.724 (18.39)
.724 (18.39)
.724 (18.39)
.724 (18.39)
.724 (18.39)
.724 (18.39)
.724 (18.39)
.724 (18.39)
.724 (18.39)
.724 (18.39)
K
Max.
.125 (3.18)
.125 (3.18)
.125 (3.18)
.140 (3.56)
.140 (3.56)
.140 (3.56)
.146 (3.71)
.146 (3.71)
.146 (3.71)
.180 (4.57)
.180 (4.57)
.180 (4.57)
.203 (5.16)
.203 (5.16)
.203 (5.16)
.203 (5.16)
.203 (5.16)
L
Max.
1.040 (26.42)
1.040 (26.42)
1.040 (26.42)
1.040 (26.42)
1.040 (26.42)
1.040 (26.42)
1.400 (35.56)
1.400 (35.56)
1.400 (35.56)
1.400 (35.56)
1.400 (35.56)
1.400 (35.56)
1.400 (35.56)
1.400 (35.56)
1.400 (35.56)
1.400 (35.56)
1.400 (35.56)
L3
Max.
2.156 (54.76)
2.156 (54.76)
2.188 (55.58)
2.188 (55.58)
2.312 (58.72)
2.406 (61.11)
2.531 (64.29)
2.688 (68.28)
2.781 (70.64)
2.844 (72.24)
3.250 (82.55)
3.250 (82.55)
3.719 (94.46)
3.719 (94.46)
4.188 (106.38)
4.297 (109.14)
7.211(183.16)†
M
+.031 (0.79)
-.000 (0.00)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.750 (19.05)
.750 (19.05)
.750 (19.05)
.750 (19.05)
.750 (19.05)
.750 (19.05)
.812 (20.62)
.812 (20.62)
.875 (22.23)
.875 (22.23)
.875 (22.23)
P
Max.
.426 (10.86)
.520 (13.21)
.614 (15.60)
.614 (15.60)
.739 (18.77)
.664 (21.95)
.614 (15.60)
.739 (18.77)
.864 (21.95)
.989 (25.12)
1.145 (29.08)
1.270 (32.26)
1.395 (35.43)
1.614 (41.00)
1.864 (47.35)
2.051 (52.10)
2.390 (60.71)
P1
Max.
.844 (21.44)
.969 (24.61)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.344 (34.14)
1.469 (37.31)
1.594 (40.49)
1.719 (43.66)
1.969 (50.01)
2.219 (56.36)
2.469 (62.71)
2.723 (69.16)†
R
± .005
.594 (15.09)
.719 (18.26)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.93)
1.562 (39.67)
1.750 (44.45)
1.938 (49.23)
2.188 (55.58)
S
± .031
.875 (22.23)
1.000 (25.40)
1.000 (25.40)
1.094 (27.79)
1.188 (30.18)
1.281 (32.54)
1.094 (27.79)
1.188 (30.18)
1.281 (32.54)
1.375 (34.93)
1.500 (38.10)
1.625 (41.28)
1.750 (44.45)
2.000 (50.80)
2.250 (57.15)
2.500 (63.50)
2.750 (69.85)
T
+ .010
- .005
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.147 (3.73)
.147 (3.73)
.173 (4.39)
.173 (4.39)
.173 (4.39)
V1
V1
Max.
1.281 (30.94)
1.250 (31.75)
1.281 (32.54)
1.281 (32.54)
1.406 (35.71)
1.531 (38.89)
1.281 (32.54)
1.406 (35.71)
1.531 (38.89)
1.593 (40.46)
1.656 (42.06)
1.718 (43.64)
1.890 (48.01)
1.968 (49.99)
2.187 (55.55)
2.406 (61.11)
5.875 (149.22)
X1
Y
Max.
Max.
.811 (20.60) 1.640 (41.66)
.842 (21.39) 1.640 (41.66)
.873 (22.17) 1.703 (43.26)
.873 (22.17) 1.703 (43.26)
.936 (23.77) 1.765 (44.83)
.998 (25.35) 1.796 (45.62)
.873 (22.17) 2.062 (52.37)
.936 (23.77) 2.125 (53.98)
.998 (25.35) 2.156 (54.76)
1.061 (26.95) 2.250 (57.15)
1.123 (28.52) 2.312 (58.72)
1.186 (30.12) 2.312 (58.72)
1.263 (32.08) 2.531 (64.29)
1.342 (34.09) 2.531 (64.29)
1.561 (39.65) 2.750 (69.85)
1.780 (45.21) 2.875 (73.02)
5.690 (144.53)
† Not to MS specification
Shell
Size
8S
10S
10SL
12S
14S
16S
12
14
Performance Specifications - Page A-74
Performance Specifications - Page A-84
Contact, Ceiling Plugs, Assembly Tools - Page A-95
Contact, Ceiling Plugs, Assembly Tools - Page A-105
Contact
Arrangements
- Page
Contact Arrangements
- Page
A-85 –A-75
A-89– A-79
A Thread
Box Mounting
90° Angle
Receptacle
Plug
1/2-28UNEF-2A
1/2-28UNEF-2B
5/8-24UNEF-2A
5/8-24UNEF-2B
5/8-24UNEF-2A
5/8-24UNEF-2B
3/4-20UNEF-2A
3/4-20UNEF-2B
7/8-20UNEF-2A
7/8-20UNEF-2B
1-20UNEF-2A
1-20UNEF-2B
3/4-20UNEF-2A
3/4-20UNEF-2B
7/8-20UNEF-2A
7/8-20UNEF-2B
Shell
Size
16
18
20
22
24
28
32
36
40
A Thread
Box Mounting
90° Angle
Receptacle
Plug
1-20UNEF-2A
1-20UNEF-2B
1-1/8-18UNEF-2A 1-1/8-18UNEF-2B
1-1/4-18UNEF-2A 1-1/4-18UNEF-2B
1-3/8-18UNEF-2A 1-3/8-18UNEF-2B
1-1/2-18UNEF-2A 1-1/2-18UNEF-2B
1-3/4-18UNS-2A
1-3/4-18UNS-2B
2-18UNS-2A
2-18UNS-2B
2-1/4-16UN-2A
2-1/4-16UN-2B
2-1/2-16UN-2A
2-1/2-16UN-2B
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-94
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 95
MIL-DTL-5015 Connectors
MS-E/F/R
Components
MS3106R
CA3106R
Straight Plug
MS3106F
CA06R
Straight Plug
MS3106E*
CA3106E
Straight Plug
MS3108E
CA3108E
90° Angle Plug
MS3108R
CA3108R
90° Angle Plug
A
Endbell
Circular
CABLE
CLAMP
Ferrule
Grommet
Pin Contacts
Insulator
Coupling Nut
Barrel
O Ring
Note: Class F is not applicable to MS3108 shell style.
* Class E inactive for new design. Use Class F or R.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A-95
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 96
MIL-DTL-5015 Connectors
MS-E/F/R
How To Order
Circular
A
MS 25183 MS 3103 CA 3100 ER
MS type potting connectors are available with nylon cups. 00 and 06 shell
styles with plastic cups and resilient insulators meet the requirements of
MS3103 and MS25183. Also available is the 08 plug with resilient
insulator and 90° angle nylon potting cup.
PREFIX
ITT Cannon provides for a 1/4" clearance for potting on all contact sizes.
SHELL STYLE
18 - 10
18 - 10
18 - 10
P
P
P
CLASS
SHELL SIZE
CONTACT ARRANGEMENTS
CONTACT TYPE
PREFIX
CA - ITT Cannon prefix indicating special
application or variation of MS
SHELL STYLE
Coupling thread diameter figured in sixteenths
of an inch
SHELL STYLE
3100 - Wall mounting receptacle (MS3103)
3106 - Straight Plug (MS325183)
3108 - 90° angle plug
CONTACT ARRANGEMENTS
See pages A-85 – A-89
CLASS
ER - Resilient insulator, nylon potting cup and
thread attachment ring
No class designator for MS types.
CONTACT TYPE
P - Pin
S - Socket
Wall Mounting Receptacle
MS3103
Nylon Potting Cup
Threaded Attachment Ring
S
R
CA3100ER
L
Polarizing
Boss
T Dia.
4 Mtg. Holes
A Thd.
The CA3100ER receptacle (MS3103) is supplied with a resilient insulator and nylon potting cup with a
threaded attachment ring. This receptacle mates with 3106 and 3108 plugs.
Performance
Specifications
Page XXX
Performance
Specifications
- Page -A-84
Contact,
Ceiling
Plugs,
Assembly
Tools - Page
Contact,
Ceiling
Plugs,
Assembly
ToolsA-105
- Page XXX
Contact Arrangements - Page A-85 – A-89
Contact Arrangements - Page XXX
L
Max.
1.531 (38.89)
1.531 (38.89)
1.531 (38.89)
1.531 (38.89)
1.531 (38.89)
1.531 (38.89)
1.968 (49.99)
1.968 (49.99)
1.968 (49.99)
1.968 (49.99)
2.188 (55.58)
2.188 (55.58)
2.188 (55.58)
2.188 (55.58)
2.188 (55.58)
2.188 (55.58)
Shell
Size
8S
10S
10SL
12S
14S
16S
12
14
16
18
20
22
24
28
32
36
R
± .005 (±0.13)
.594 (15.09)
.719 (18.26)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.93)
1.562 (39.67)
1.750 (44.45)
1.938 (49.23)
S
Max.
.906 (23.01)
1.031 (26.19)
1.031 (26.19)
1.125 (28.58)
1.219 (30.96)
1.312 (33.32)
1.125 (28.58)
1.219 (30.96)
1.312 (33.32)
1.406 (35.71)
1.531 (38.89)
1.656 (42.06)
1.781 (45.24)
2.031 (51.59)
2.281 (57.94)
2.531 (64.29)
R
+.010 (+0.25)
-.005 (-.031)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.147 (3.73)
.147 (3.73)
.173 (4.39)
.173 (4.39)
A
Thread
1/2-28UNEF-2A
5/8-24NEF-2A
5/8-24NEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
1-20UNEF-2A
3/4-20UNEF-2A
3/4-20UNEF-2A
1-20UNEF-2A
1-1/8-180NEF-2A
1-1/4-18NEF-2A
1-3/8-18NEF-2A
1-1/2-18NEF-2A
1-3/4-18NS-2A
2-18NS-2A
2-1/4-16UN-2A
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-96
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 97
MIL-DTL-5015 Connectors
MS-E/F/R
Straight Plug
MS25183
Nylon Potting Cup
Rubber Gasket
CA3106ER
Length of
Engagement
Metal Potting Ring
J
A
A Thd.
Circular
1/4"
To end
of
contact
Gasket
P
L
The CA3106ER plug is supplied with resilient insulators, nylon potting cups with threaded attachment rings,
and a rubber gasket under the coupling nut. This plug mates with 3100, 3101 and 3102 recaptacles.
90° Angle Plug
Nylon Potting Cup
Rubber Gasket
CA3108ER
P Dia.
L
Polarizing
Groove
B
A Thd.
D
Metal
Potting Ring
The CA3108ER is supplied with resilient insulator, 90º nylon potting cup and threaded attachment ring with a
rubber gasket under the coupling nut. This plug mates with 3100, 3101 and 3102 receptacles.
CA3106ER
Shell
Size
8S
10S
10SL
12S
14S
16S
12
14
16
18
20
22
24
28
32
36
40
J
Max.
.536 (13.61)
.536 (13.61)
.536 (13.61)
.536 (13.61)
.536 (13.61)
.536 (13.61)
.724 (18.39)
.724 (18.39)
.724 (18.39)
.724 (18.39)
.724 (18.39)
.724 (18.39)
.724 (18.39)
.724 (18.39)
.724 (18.39)
.724 (18.39)
.724 (18.39)
CA3108ER
L
Max.
1.562 (39.67)
1.562 (39.67)
1.562 (39.67)
1.562 (39.67)
1.562 (39.67)
1.562 (39.67)
2.000 (50.80)
2.000 (50.80)
2.000 (50.80)
2.000 (50.80)
2.125 (53.98)
2.125 (53.98)
2.125 (53.98)
2.125 (53.98)
2.180 (55.37)
2.180 (55.37)
2.180 (55.37)
P
Max.
.844 (21.44)
.969 (21.44)
.969 (21.44)
1.062 (21.44)
1.156 (21.44)
1.250 (21.44)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.344 (34.14)
1.469 (37.31)
1.594 (40.49)
1.719 (43.66)
1.969 (50.01)
1.219 (30.96)
2.469 (62.71)
2.723 (69.16)
A
Thread
1/2-28UNEF-2B
5/8-24UNEF-2B
5/8-24UNEF-2B
3/4-20UNEF-2B
7/8-20UNEF-2B
1-20UNEF-2B
3/4-20UNEF-2B
7/8-20UNEF-2B
1-20UNEF-2B
1-1/8-18UNEF-2B
1-1/4-18UNEF-2B
1-3/8-18UNEF-2B
1-1/2-18UNEF-2B
1-3/4-18UNS-2B
2-18UNS-2B
2-1/4-16UN-2B
2-1/2-16UN-2B
B
Max.
.563(13.61)
.563(13.61)
.563(13.61)
.563(13.61)
.724(18.39)
.724(18.39)
.724(18.39)
.724(18.39)
.724(18.39)
.724(18.39)
.724(18.39)
.724(18.39)
.724(18.39)
.724(18.39)
D
Max.
1.040(26.42)
1.040(26.42)
1.040(26.42)
1.290(32.77)
1.040(26.42)
1.040(26.42)
1.290(32.77)
1.290(32.77)
1.540(39.12)
1.540(39.12)
1.790(45.47)
2.040(51.82)
2.290(58.17)
2.540(64.52)
Performance Specifications - Page A-84
Contact, Ceiling Plugs, Assembly Tools - Page A-105
Contact Arrangements - Page A-85 – A-89
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A-97
L Max.
For Arr.
For Arr.
w/#16
w/#8
&#12
&#4
Contacts
Contacts
1.463(37.16)
1.600(40.64)
1.600(40.64)
2.300(58.42)
1.600(40.64)
2.550(64.77)
1.910(48.51)
1.910(48.51)
2.610(66.29)
1.910(48.51)
2.850(72.39)
2.100(53.34)
2.850(72.39)
2.100(53.34)
2.850(72.39)
2.100(53.34)
2.850(72.39)
2.281(57.94)
2.985(75.82)
2.485(63.12)
2.985(75.82)
2.485(63.12)
2.985(75.82)
2.485(63.12)
2.985(75.82)
P
Max.
969(24.61)
1.062(26.97)
1.156(29.36)
1.250(31.75)
1.062(26.97)
1.156(29.36)
1.250(31.75)
1.344(34.14)
1.469(37.31)
1.594(40.49)
1.719(43.66)
1.969(50.01)
1.219(30.96)
2.469(62.71)
A
Thread
5/8-24UNEF-2B
3/4-24UNEF-2B
7/8-20UNEF-2B
1-20UNEF-2B
3/4-20UNEF-2B
7/8-20UNEF-2B
1-20UNEF-2B
1-1/8-18UNEF-2B
1-1/4-18UNEF-2B
1-3/8-18UNEF-2B
1-1/2-18UNEF-2B
1-3/4-18UNS-2B
2-18UNS-2B
2-1/4-16UN-2B
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 98
MIL-DTL-5015 Connectors
MS
Straight Plug with Shrink Boot Adapter
CA3106E-DN
A
Circular
CA3106E-DN is a straight plug with
endbell for shrink boot adapters.
Crimp and solder versions are available (please indicate ...F80 or ...F183).
CA3106-DN mate with 3100, 3101
and 3102 shell styles.
Order reference
Pin insert*
CA3106E10SL-**-P-DN
CA3106E12S-**-P-DN
CA3106E14S-**-P-DN
CA3106E16S-**-P-DN
CA3106E12-**-P-DN
CA3106E14-**-P-DN
CA3106E16-**-P-DN
CA3106E18-**-P-DN
CA3106E20-**-P-DN
CA3106E22-**-P-DN
CA3106E24-**-P-DN
CA3106E28-**-P-DN
CA3106E32-**-P-DN
CA3106E36-**-P-DN
A
Thread
5/8-24NEF-2B
3/4-20UNEF-2B
7/8-20UNEF-2B
1-20UNEF-2B
3/4-20UNEF-2B
7/8-20UNEF-2B
1-20UNEF-2B
1-1/8-18NEF-2B
1-1/4-18NEF-2B
1-3/8-18NEF-2B
1-1/2-16NEF-2B
1-3/4-18NS-2B
2-18NS-2B
2-1/4-16UN-2B
B
min.
7,7
7,9
10,6
13,5
7,9
10,6
13,5
14,6
18,5
20,8
24,6
27,0
33,3
38,5
C
max.
13,2
13,2
17,0
21,9
13,2
17,0
21,9
21,9
26,6
26,2
34,5
34,5
43,6
43,6
D
±0.2
15,5
15,5
19,1
23,9
15,5
19,1
23,9
23,9
29,6
29,6
37,8
37,8
47,8
47,8
E
±0,2
17,0
17,8
19,1
23,9
17,8
20,1
23,5
26,5
30,2
33,6
36,1
41,4
48,6
54,8
F
0,5
11,7
11,8
11,7
11,5
11,7
11,7
11,5
12,7
12,7
12,7
12,7
12,7
15,2
15,2
L
max.
11,7
58,8
50,0
50,0
50,0
60,0
60,0
60,0
65,0
65,0
65,0
65,0
70,0
80,0
P
max.
50,0
25,6
28,6
31,8
25,6
28,6
31,8
34,1
37,3
40,5
43,8
50,0
56,3
62,7
*For socket inserts substitute S for P
**Add contact arrangement number (see pages A-85 – A-89)
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-98
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 99
MIL-DTL-5015 Bulkhead Receptacles
BFR/TBF
How To Order
BFR 14S - S P
TBF 20 - 15 PS
TBF and BFR pressurized bulkhead receptacles mate with standard
MS type plugs (3106 and 3108) if contact arrangements correspond.
Both the BFR and TBF have resilient insulators. The TBF (thru
bulkhead fitting) version has a double faced construction allowing
mating from both ends. An O-ring is supplied as standard on both
the BFR and TBF. Contacts are silver plated copper or brass alloy.
Shells are aluminum alloy.
*
*
1
PREFIX
BFR - Bulkhead fittings
TBF - Thru bulkhead fittings
CONTACT TYPE
P - Pin; S - Socket;
PS - pin and socket (TBF only)
SHELL SIZE
Coupling thread diameter figured in sixteenths
of an inch.
ALTERNATE POSITION
(Consult factory for available
alternate positions.)
CONTACT ARRANGEMENTS
See pages A-85 – A-89
MOUNTING
-1 obligatory code, BFR only
Thru-Bulkhead Receptacle
TBF - Resilient Insulator
L
K
Socket
Side
Polarizing Boss
Polarizing Boss
M
Pin
Side
R
S Typ.
Typ.
Panel Thickness
T Dia.
4 Mtg. Holes
Pin Insert Ends
V
A
Thd.
Socket Insert Ends
TBF thru-bulkhead fittings have pressurized resilient insulators. Special doublefaced pin and socket contact construction permits cable components to be wired
and tested in the shop and then to be plugged into the mounted TBF plug to
complete the installation. The TBF mates with 3106, 3107 and 3108 plugs.
Shell
Size
8S
10S
10SL
12S
14S
16S
12
14
16
18
20
22
24
28
32
36
40
K
Max.
.125 (3.18)
.125 (3.18)
.125 (3.18)
.140 (3.56)
.140 (3.56)
.140 (3.56)
.146 ( 3.71)
.146 ( 3.71)
.146 ( 3.71)
.180 (4.57)
.180 (4.57)
.180 (4.57)
.203 (5.16)
.203 (5.16)
.203 (5.16)
.203 (5.16)
.203 (5.16)
L
Max.
1.482 (37.64)
1.482 (37.64)
1.482 (37.64)
1.482 (37.64)
1.482 (37.64)
1.482 (37.64)
2.030 (51.56)
2.030 (51.56)
2.030 (51.56)
2.030 (51.56)
2.030 (51.56)
2.030 (51.56)
2.030 (51.56)
2.030 (51.56)
2.030 (51.56)
2.030 (51.56)
2.030 (51.56)
Performance Specifications - Page A-84
M
+.031 (0.79)
-.000 (0.00)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.750 (19.05)
.750 (19.05)
.750 (19.05)
.750 (19.05)
.750 (19.05)
.750 (19.05)
.812 (20.62)
.812 (20.62)
.875 (22.22)
.812 (20.62)
.875 (22.22)
R
±.005 (0.13)
.594 (15.09)
.179 (18.26)
.179 (18.26)
.812 (20.62)
.906 (23.01)
.968 (24.59)
.812 (20.62)
.906 (23.01)
.968 (24.59)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.92)
1.562 (39.67)
1.750 (44.45)
1.938 (49.23)
2.188 (55.58)
Contacts, Sealing Plugs, Assembly Tools - Page A-105
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
S
±.031 (0.79)
.875 (22.22)
1.000 (25.40)
1.000 (25.40)
1.094 (27.79)
1.188 (30.18)
1.281 (32.54)
1.094 (27.79)
1.188 (30.18)
1.281 (32.54)
1.375 (34.92)
1.500 (38.10)
1.625 (34.28)
1.750 (44.45)
2.000 (50.80)
2.250 (57.15)
2.500 (63.50)
2.750 (69.85)
A-99
T
+.010 (0.25)
-.005 (0.13)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.147 (3.73)
.147 (3.73)
.173 (4.39)
.173 (4.39)
.173 (4.39)
V
Max.
.325 (8.26)
.325 (8.26)
.325 (8.26)
.325 (8.26)
.325 (8.26)
.325 (8.26)
.445 (11.30)
.445 (11.30)
.445 (11.30)
.445 (11.30)
.445 (11.30)
.445 (11.30)
.383 (9.73)
.383 (9.73)
.320 (8.13)
.383 (9.73)
.383 (9.73)
A
Circular
PREFIX
SHELL SIZE
CONTACT ARRANGEMENT
CONTACT TYPE
ALTERNATE POSITION
MOUNTING (BFR ONLY)
A
Thread
1/2-28UNEF-2A
5/8-24UNEF-2A
5/8-24UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
1-20UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
1-20UNEF-2A
1-1/8-18UNEF-2A
1-1/4-18UNEF-2A
1-3/8-18UNEF-2A
1-1/2-18UNEF-2A
1-3/4-18UNS-2A
2-18UNS-2A
2-1/4-16UN-2A
Contact Arrangements - Page A-85 – A-89
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 100
MIL-DTL-5015 Bulkhead Receptacles
BFR/TBF
Pressurized Bulkhead Receptacle
BFR
L
C
A
G
T
M
H
Circular
N
A
Thd.
V Panel Thickness
Across Hex
Standard Position
Pin is 3/32" Dia.
TYPE 1
Shell
Insulator
Lock Nut
O Ring
Position Pin
Mounting
Part No. Example
BFR pressurized bulkhead receptacles withstand the air leakage
requirements of MIL-C-5015 not to exceed 1 cu. in. of air per
hour when subjected to a pressure differential of 30 psi at -55°C.
Insulators are resilient material bonded to aluminum shell. Both
pin and socket assemblies are available. The BFR will mate with
standard MS type 3106 and 3108 plugs.
Shell
Size
8S
10S
10SL
12S
14S
16S
12
14
16
18
20
22
24
28
32
36
C
Max.
.853 (21.67)
.853 (21.67)
.853 (21.67)
.853 (21.67)
.853 (21.67)
.853 (21.67)
1.244 (31.60)
1.244 (31.60)
1.244 (31.60)
1.244 (31.60)
1.244 (31.60)
1.244 (31.60)
1.244 (31.60)
1.244 (31.60)
1.244 (31.60)
1.244 (31.60)
G
Max.
.895 (22.73)
1.015 (25.78)
1.015 (25.78)
1.077 (27.36)
1.203 (30.56)
1.327 (33.71)
1.077 (27.36)
1.203 (30.56)
1.327 (33.71)
1.453 (36.91)
1.577 (40.06)
1.577 (40.06)
1.827 (48.41)
1.953 (49.61)
2.203 (55.96)
2.577 (65.46)
H
Max.
1.077 (27.36)
1.203 (30.56)
1.203 (30.56)
1.327 (33.71)
1.453 (36.91)
1.577 (40.06)
1.327 (33.71)
1.453 (36.91)
1.577 (40.06)
1.703 (43.26)
1.827 (46.41)
1.953 (49.61)
2.077 (52.76)
2.327 (59.11)
2.577 (65.45)
2.827 (71.81)
L
Max.
1.087 (27.61)
1.087 (27.61)
1.087 (27.61)
1.087 (27.61)
1.087 (27.61)
1.087 (27.61)
1.525 (38.74)
1.525 (38.74)
1.525 (38.74)
1.525 (38.74)
1.525 (38.74)
1.525 (38.74)
1.525 (38.74)
1.525 (38.74)
1.525 (38.74)
1.525 (38.74)
M
Max.
.702 (17.83)
.822 (20.88)
.822 (20.88)
.955 (24.26)
1.072 (27.23)
1.265 (32.13)
.955 (24.26)
1.072 (27.23)
1.265 (32.13)
1.395 (35.43)
1.515 (38.48)
1.635 (41.53)
1.765 (44.83)
2.015 (51.18)
2.205 (56.01)
2.455 (62.36)
N
Max.
.820 (20.83)
.960 (24.38)
.960 (24.38)
1.110 (28.19)
1.250 (31.75)
1.460 (37.08)
1.110 (28.19)
1.250 (31.75)
1.460 (37.08)
1.610 (40.89)
1.750 (44.45)
1.900 (48.26)
2.030 (51.56)
2.330 (59.18)
2.550 (64.77)
2.840 (72.14)
Standard
Polychloroprene
Hex with 6 wire holes
Neoprene
Standard
Figure 1 or 2
BFR-14S-SP-1
#16
.140 (3.56)
.140 (3.56)
.140 (3.56)
.140 (3.56)
.140 (3.56)
.140 (3.56)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
Shell Size
8S
10S
10SL
12S
14S
16S
12
14
Performance Specifications - Page A-84
Performance Specifications - Page XX
Contact, Ceiling
Plugs, Plugs,
AssemblyAssembly
Tools - Page Tool
A-105- Page XX
Contacts,
Sealing
Contact Arrangements - Page XX
Contact Arrangements - Page A-85 – A-89
#12
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
T Max.
Solder Pot Ext.
#8
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
A Thread
1/2-28UNEF-2A
5/8-24UNEF-2A
5/8-24UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
1-20UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
#4
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
Shell Size
16
18
20
22
24
28
32
36
#0
.359 (9.12)
.359 (9.12)
.359 (9.12)
.359 (9.12)
.359 (9.12)
.359 (9.12)
V
Max.
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.375 (9.52)
.375 (9.52)
.375 (9.52)
.375 (9.52)
.375 (9.52)
.375 (9.52)
.375 (9.52)
.375 (9.52)
.375 (9.52)
.375 (9.52)
.375 (9.52)
.312 (7.92)
A Thread
1-20UNEF-2A
1-1/8-18UNEF-2A
1-1/4-18UNEF-2A
1-3/8-18UNEF-2A
1-1/2-18UNEF-2A
1-3/4-18UNS-2A
2-18UNS-2A
2-1/4-16UN-2A
Mounting Dimensions
.102 (2.59)
.097 (2.46) DIA
.102 (2.59)
.097 (2.46) DIA
A
F
E
E
Fig. 1
Shell Size
8S
10S, 10SL
12S, 12
14S, 14
16S, 16
18
A
E
±.005
+.015 (0.38)
(0.13)
-.000 (0.00)
.323 (8.20) .500 (12.70)
.385 (9.78) .625 (15.88)
.448 (11.38) .750 (19.05)
.510 (12.95) .875 (22.22)
.573 (14.55) 1.000 (25.40)
.635 (16.13) 1.125 (28.58)
F
±.005
(0.13)
.373 (9.47)
.435 (11.05)
.498 (12.65)
.560 (14.22)
.623 (15.82)
.685 (17.40)
Shell Size
20
22
24
28
32
36
A
±.005
(0.13)
.698 (17.73)
.760 (19.30)
.823 (20.90)
.948 (24.08)
1.073 (27.25)
1.198 (30.43)
E
+.015 (0.38)
-.000 (0.00)
1.250 (31.75)
1.375 (34.92)
1.500 (38.10)
1.750 (44.45)
2.000 (50.80)
2.250 (57.15)
F
±.005
(0.13)
.748 (19.00)
.810 (20.57)
.873 (22.17)
.998 (25.35)
1.123 (28.52)
1.248 (31.70)
Fig. 2
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-100
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 101
MIL-DTL-5015 Connectors
Panel Cutouts
S
T
R
O
Flange dimensions and mounting holes for 5015 type MS
receptacles. Mounting hole diameters do not apply to
MS5015 class KT & KS connectors.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A-101
±.005
R
.594
.719
.812
.906
.969
1.062
1.156
1.250
1.375
1.562
1.750
1.938
2.188
±.031
S
.875
1.000
1.094
1.188
1.281
1.375
1.500
1.625
1.750
2.000
2.250
2.500
2.750
O
.562
.688
.812
.938
1.062
1.188
1.312
1.438
1.562
1.812
2.062
2.312
2.562
±.005
T
.120
.120
.120
.120
.120
.120
.120
.120
.147
.147
.173
.173
.173
A
Circular
DIM TOL
Shell Size
8S
10S & 10SL
12 & 12S
14 & 14S
16 & 16S
18
20
22
24
28
32
36
40
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 102
MIL-DTL-5015 Connectors
Accessories
Plug Metal Protective Caps
MS25042
A
CA17530
CA19741
For 06 and 08 Style Plugs
C Dia.
B
Circular
These externally threaded
metal dust caps are used to
protect the MS3106 and
MS3108 plugs. Material is
aluminum alloy. They are
furnished with sash chain or
less sash chain.
D Dia.
E
A Thd.
.250 Min.
Perf. Thd.
Black Anodized Finish With
Sash Chain
MS
ITT Cannon
MS25042-8DA
CA17530-8000
MS25042-10DA CA17530-8001
MS25042-12DA CA17530-8002
MS25042-14DA CA17530-8003
MS25042-16DA CA17530-8004
MS25042-18DA CA17530-8005
MS25042-20DA CA17530-8006
MS25042-22DA CA17530-8007
MS25042-24DA CA17530-8008
MS25042-28DA CA17530-8009
MS25042-32DA CA17530-8010
MS25042-36DA CA17530-8011
MS25042-40DA CA17530-8012
MS25042-44DA CA17530-8013
MS25042-48DA CA17530-8014
Part Number
Olive Drab Chromate Over
Cadmium Finish with Sash Chain Olive Drab Chromate Over
May Still be
Cadmium Finish
Superceded
Purchased by
Without Sash Chain
MS Number (Ref) ITTC Part Number
ITTC Part Number
MS25042-8D
CA17530-5100
CA19741-8
MS25042-10D
CA17530-5101
CA19741-10
MS25042-12D
CA17530-5102
CA19741-12
MS25042-14D
CA17530-5103
CA19741-14
MS25042-16D
CA17530-5104
CA19741-16
MS25042-18D
CA17530-5105
CA19741-18
MS25042-20D
CA17530-5106
CA19741-20
MS25042-22D
CA17530-5107
CA19741-22
MS25042-24D
CA17530-5108
CA19741-24
MS25042-28D
CA17530-5109
CA19741-28
MS25042-32D
CA17530-5110
CA19741-32
MS25042-36D
CA17530-5111
CA19741-36
MS25042-40D
CA17530-5112
CA19741-40
MS25042-44D
CA17530-5113
CA19741-44
MS25042-48D
CA17530-5114
CA19741-48
Fits
Shell Size
8S
10S, 10SL
12, 12S
14, 14S
16, 16S
18
20
22
24
28
32
36
40
44
48
B
Max.
.656 (16.66)
.656 (16.66)
.844 (21.44)
.844 (21.44)
.844 (21.44)
.844 (21.44)
.844 (21.44)
.844 (21.44)
.844 (21.44)
.844 (21.44)
.844 (21.44)
.844 (21.44)
.844 (21.44)
.844 (21.44)
.844 (21.44)
C
Dia.
Max.
.562 (14.27)
.687 (17.45)
.812 (20.62)
.937 (23.80)
1.062 (26.97)
1.187 (30.15)
1.312 (33.32)
1.437 (36.50)
1.562 (39.67)
1.812 (46.02)
2.062 (52.37)
2.312 (58.72)
2.562 (65.07)
2.812 (71.42)
3.062 (77.77)
E
Max.
4.500 (114.30)
4.500 (114.30)
5.500 (139.70)
5.500 (139.70)
5.500 (139.70)
5.500 (139.70)
5.500 (139.70)
5.500 (139.70)
6.000 (152.40)
8.250 (209.55)
8.250 (209.55)
8.250 (209.55)
8.250 (209.55)
8.250 (209.55)
8.250 (209.55)
D
Dia.
Max.
.166 (4.22)
.166 (4.22)
.166 (4.22)
.166 (4.22)
.166 (4.22)
.166 (4.22)
.197 (5.00)
.197 (5.00)
.197 (5.00)
.197 (5.00)
.228 (5.79)
.228 (5.79)
.228 (5.79)
.228 (5.79)
.228 (5.79)
A
Thread
1/2-28UNEF-2A
5/8-24UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
1-20UNEF-2A
1-1/8-18UNEF-2A
1-1/4-18UNEF-2A
1-3/8-18UNEF-2A
1-1/2-18UNEF-2A
1-3/4-18UNEF-2A
2-18UNEF-2A
2-1/4-16UN-2A
2-1/2-16UN-2A
2-3/4-16UN-2A
3-16UN-2A
Plug Metal Protective Caps
MS25043
CA2209
CA2322
For 00, 01 and 02
Style Receptacles
C Dia.
Gasket
These internally threaded metal
dust caps are used to protect the
MS3100, MS3101 and MS3102
receptacles. Material is aluminum
alloy. They are furnished with sash
chain or less sash chain.
Black Anodized Finish With
Sash Chain
MS
ITT Cannon
MS25043-8DA
CA2209-8000
MS25043-10DA CA2209-8001
MS25043-12DA CA2209-8002
MS25043-14DA CA2209-8003
MS25043-16DA CA2209-8004
MS25043-18DA CA2209-8005
MS25043-20DA CA2209-8006
MS25043-22DA CA2209-8007
MS25043-24DA CA2209-8008
MS25043-28DA CA2209-8009
MS25043-32DA CA2209-8010
MS25043-36DA CA2209-8011
MS25043-40DA CA2209-8012
MS25043-44DA CA2209-8013
MS25043-48DA CA2209-8014
Part Number
Olive Drab Chromate Over
Cadmium Finish with Sash Chain Olive Drab Chromate Over
May Still be
Cadmium Finish
Superceded
Purchased by
Without Sash Chain
MS Number (Ref) ITTC Part Number
ITTC Part Number
MS25043-8D
CA2209-5100
CA2322-1
MS25043-10D
CA2209-5101
CA2322-2
MS25043-12D
CA2209-5102
CA2322-3
MS25043-14D
CA2209-5103
CA2322-4
MS25043-16D
CA2209-5104
CA2322-5
MS25043-18D
CA2209-5105
CA2322-6
MS25043-20D
CA2209-5106
CA2322-7
MS25043-22D
CA2209-5107
CA2322-8
MS25043-24D
CA2209-5108
CA2322-9
MS25043-28D
CA2209-5109
CA2322-10
MS25043-32D
CA2209-5110
CA2322-11
MS25043-36D
CA2209-5111
CA2322-12
MS25043-40D
CA2209-5112
CA2322-13
MS25043-44D
CA2209-5113
CA2322-14
MS25043-48D
CA2209-5114
CA2322-15
B
Fits
Shell Size
8S
10S, 10SL
12, 12S
14, 14S
16, 16S
18
20
22
24
28
32
36
40
44
48
D Dia.
A Thd.
E
B
Max.
.469 (11.91)
.469 (11.91)
.469 (11.91)
.469 (11.91)
.469 (11.91)
.469 (11.91)
.469 (11.91)
.469 (11.91)
.469 (11.91)
.531 (13.49)
.531 (13.49)
.531 (13.49)
.531 (13.49)
.531 (13.49)
.531 (13.49)
C
Dia.
Max.
.688 (17.48)
.815 (20.70)
1.000 (25.40)
1.125 (28.58)
1.188 (30.18)
1.344 (34.14)
1.469 (37.31)
1.594 (40.49)
1.719 (43.66)
1.969 (50.01)
2.219 (56.36)
2.469 (62.71)
2.719 (69.06)
2.969 (75.41)
3.188 (80.98)
E
Max.
4.500 (114.30)
4.500 (114.30)
5.500 (139.70)
5.500 (139.70)
5.500 (139.70)
5.500 (139.70)
5.500 (139.70)
5.500 (139.70)
6.000 (152.40)
8.250 (209.55)
8.250 (209.55)
8.250 (209.55)
8.250 (209.55)
8.250 (209.55)
8.250 (209.55)
D
Dia.
Max.
.150 (3.81)
.150 (3.81)
.150 (3.81)
.150 (3.81)
.150 (3.81)
.150 (3.81)
.150 (3.81)
.150 (3.81)
.181 (4.60)
.181 (4.60)
.197 (5.00)
.197 (5.00)
.197 (5.00)
.197 (5.00)
.197 (5.00)
A
Thread
1/2-28UNEF-2B
5/8-24UNEF-2B
3/4-20UNEF-2B
7/8-20UNEF-2B
1-20UNEF-2B
1-1/8-18UNEF-2B
1-1/4-18UNEF-2B
1-3/8-18UNEF-2B
1-1/2-18UNEF-2B
1-3/4-18UNS-2B
2-18UNS-2B
2-1/4-16UN-2B
2-1/2-16UN-2B
2-3/4-16UN-2B
3-16UN-2B
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-102
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 103
MIL-DTL-5015 Connectors
Accessories
Cable Clamp
L
M85049-41
With or without bushing
.063
A
A Thd.
E
Circular
P
R
2 Places
Safety Wires Holes
M85049-41 cable clamp is made for plugs and receptacles that have an endbell
with external conduit threads. The double clamping action provides a balanced,
positive hold on the wires and greatly reduces moisture transmission. Provision is
made for safety wiring. This clamp is supplied without bushing; to order bushing,
add “with bushing” after part number.
Part
Number*
M85049/41-3A
M85049/41-4A
M85049/41-6A
M85049/41-8A
M85049/41-10A
M85049/41-12A
M85049/41-16A
M85049/41-20A
M85049/41-24A
M85049/41-28A
M85049/41-32A
M85049/41-40A
Superceded
Part Number
MS3057-3A
MS3057-4A
MS3057-6A
MS3057-8A
MS3057-10A
MS3057-12A
MS3057-16A
MS3057-20A
MS3057-24A
MS3057-28A
MS3057-32A
MS3057-40A
Fits
Shell Size
8S-10S
10SL, 12S, 12
14S, 14
16S, 16
18
20, 22
24, 28
32
36
40
44
48
Accommodates
MS Bushings
MS3420-3
MS3420-4
MS3420-6
MS3420-8
MS3420-10
MS3420-12
MS3420-16,12
MS3420-20,16
MS3420-24,20
MS3420-24,20
MS3420-32,28,24
MS3420-40,32,28
E
Min.
.102 (2.59)
.140 (3.56)
.195 (4.95)
.255 (6.48)
.285 (7.24)
.350 (8.89)
.468 (11.89)
.664 (16.87)
.694 (17.63)
.911 (23.14)
-
E
Max.
.250 (6.35)
.312 (7.92)
.438 (11.13)
.562 (14.27)
.625 (15.88)
.750 (19.05)
.938 (23.83)
1.250 (31.75)
1.375 (34.92)
1.625 (41.28)
1.875 (47.62)
2.375 (60.32)
L
±.031 (0.79)
.812 (20.62)
.812 (20.62)
.875 (22.22)
.938 (23.83)
.938 (23.83)
.938 (23.83)
1.031 (26.19)
1.094 (27.79)
1.156 (29.36)
1.688 (42.88)
1.750 (44.45)
1.750 (44.45)
P
±0.31 (0.79)
.688 (17.48)
.812 (20.62)
.969 (24.61)
1.094 (27.79)
1.188 (30.18)
1.375 (34.92)
1.656 (42.06)
2.031 (51.59)
2.219 (56.36)
2.500 (63.50)
2.781 (70.64)
3.281 (83.34)
R
±0.31 (0.79)
.812 (20.62)
.875 (22.22)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.496 (37.31)
1.688 (42.88)
2.031 (51.59)
2.281 (57.94)
2.688 (68.28)
2.938 (74.63)
3.500 (88.90)
A
Thread
1/2-28UNEF-2B
5/8-24UNEF-2B
3/4-20UNEF-2B
7/8-20UNEF-2B
1-20UNEF-2B
1-3/16-18UNEF-2B
1-7/16-18UNEF-2B
1-3/4-18UNS-2B
2-18UNS-2B
2-1/4-16UN-2B
2-1/2-16UN-2B
3-16UN-2B
*To order cable clamp with bushing, add “with bushing” after part number.
Telescoping Bushing
MS3420/
MS39056(REF.)
CA18220
L
R
C
Telescoping bushing with
M85049/41 cable clamp
Telescoping gland bushing (used with M85049/41 cable
clamp) keep dirt, oil and moisture out of endbell. Taping or
wrapping wires is eliminated since bushing protects wires
going through clamp. Combinations of bushings may be used
to decrease cable entry diameter to improve sealing.
MS Part
Number
MS3420-3
MS3420-4
MS3420-6
MS3420-8
MS3420-10
MS3420-12
MS3420-16
MS3420-20
MS3420-24
MS3420-28
MS3420-32
MS3420-40
Superceded
MS Part
Number
MS39056-1
MS39056-2
MS39056-3
MS39056-4
MS39056-5
MS39056-6
MS39056-7
MS39056-8
MS39056-9
MS39056-10
MS39056-11
MS39056-12
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A-103
ITT Cannon
Part Number
CA18220-3
CA18220-4
CA18220-6
CA18220-8
CA18220-10
CA18220-12
CA18220-16
CA18220-20
CA18220-24
CA18220-28
CA18220-32
CA18220-40
Fits
Shell Size
8S-10S
10SL, 12S, 12
14S, 14
16S, 16
18
20, 22
24, 28
32
36
40
44
48
C
±0.16 (0.41)
.379 (9.63)
.505 (12.83)
.619 (15.72)
.744 (18.90)
.869 (22.07)
1.064 (27.03)
1.314 (33.38)
1.596 (40.54)
1.847 (46.91)
2.085 (52.96)
2.335 (59.31)
2.835 (72.01)
L
±0.31 (0.79)
2.875 (73.02)
2.750 (69.85)
2.625 (66.68)
2.500 (63.50)
2.375 (60.32)
2.250 (57.15)
2.125 (53.98)
2.000 (50.80)
1.875 (47.62)
1.750 (44.45)
1.625 (41.28)
1.500 (38.10)
R
±0.16 (0.41)
.130 (3.30)
.200 (5.59)
.312 (7.92)
.437 (11.10)
.562 (14.27)
.625 (15.88)
.750 (19.05)
.937 (23.80)
1.250 (31.75)
1.375 (34.92)
1.624 (41.25)
1.874 (47.60)
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 104
MIL-DTL-5015 Connectors
Accessories
Plastic Protective Caps
025-XXXX-000
Circular
A
B
Protective dust caps are designed to cover the
coupling and conduit ends of MS connectors
where there is a possibility of foreign matter
accumulating on the interior of the connector or
of damage to the threaded parts. Material is red
polyethylene. Plastic dust caps can be reused, but
are not intended to replace the standard
aluminum dust caps shown in preceding pages.
C
A
D
E
.06
.13
Part
Number
025-0458-000
025-0459-000
025-0460-000
025-0462-000
025-0463-000
025-0466-000
025-0467-000
025-0468-000
025-0469-000
025-0470-000
025-0471-000
025-0472-000
025-0473-000
025-0474-000
025-0475-000
025-0477-000
025-0478-000
025-0479-000
025-0480-000
025-0484-000
025-0486-000
025-0487-000
025-0488-000
025-0489-000
025-0490-000
025-0491-000
025-0492-000
025-0493-000
025-0498-000
025-0499-000
025-0500-000
025-0501-000
025-0502-000
025-0503-000
025-0504-000
025-0505-000
025-0507-000
025-0510-000
025-0511-000
025-0608-000
025-0609-000
025-0610-000
025-0611-000
025-0612-000
025-0613-000
025-0614-000
MS3100F,R
Coupling
Solder
End
Pot End
8S
10S, 10SL
12S, 12
14S, 14
8S, 10S
10SL, 12S, 12
14S, 14
16S, 16
20
22
MS3102F,R
Coupling
Solder
End
Pot End
8S
8S
8S, 10S
10S, 10SL
10SL, 12S, 12
12S, 12
14S, 14
14S, 14
16S, 16
18
20
20
22
22
24
28
32
36
40
44
48
MS-F (only)
Solder
Pot End
8S
MS3106/MS3108
F,R
Coupling
Solder
End
Pot End
.469 (11.91)
10S, 10SL
12S, 12
14S, 14
16S, 16
18
22
24
28
32
36
40
44
48
16S, 16
28
32
36
40
48
18
24
44
18
20, 22
24, 24
32
36
40
44
48
16S, 16
28
32
36
40
48
18
24
44
48
36
40
44
32
24, 28
20, 22
18
22
20
8S
10SL, 12S, 12
14S, 14
16S, 16
28
32
36
18
20, 22
24, 28
32
36
40
44
48
A
Max.
.673
.734
.848
.973
1.098
1.209
1.396
1.500
1.625
1.870
2.120
2.370
2.501
2.872
3.122
.802
.911
1.036
1.161
1.290
1.540
1.665
1.907
2.157
2.412
2.672
2.922
3.172
1.240
1.427
1.677
1.985
2.245
2.495
2.742
3.257
1.365
1.740
3.007
.643
.829
.954
1.079
1.839
2.089
2.376
B
Max.
.440
.440
.700
.700
.700
.700
.700
.700
.700
.700
.700
.700
.700
.700
.700
.491
.571
.571
.571
.576
.576
.576
.576
.576
.576
.576
.576
.576
.700
.700
.700
.700
.700
.700
.700
.700
.700
.700
.700
.440
.700
.700
.700
.700
.700
.700
Dimensions
C
D
Max.
Max.
.430
.486
.490
.546
.600
.656
.730
.786
.850
.908
.950
1.016
1.150
1.216
1.240
1.306
1.360
1.426
1.610
1.676
1.860
1.926
2.110
2.176
2.310
2.380
2.590
2.660
2.840
2.910
.550
.616
.669
.725
.794
.850
.919
.975
1.028
1.094
1.278
1.344
1.403
1.469
1.645
1.711
1.895
1.961
2.140
2.216
2.390
2.466
2.640
2.716
2.890
2.966
.990
1.056
1.117
1.183
1.420
1.486
1.730
1.796
1.980
2.046
2.230
2.296
2.480
2.546
2.980
3.046
1.110
1.176
1.490
1.556
2.730
2.796
.400
.456
.580
.636
.710
.766
.830
.886
1.570
1.626
1.820
1.876
2.010
2.066
E
Max.
.583
.644
.758
.883
1.008
1.119
1.308
1.405
1.530
1.775
2.025
2.275
2.491
2.772
30.22
.712
.821
.946
1.071
1.195
1.445
1.570
1.812
2.062
2.317
2.572
2.822
3.072
1.150
1.337
1.587
1.895
2.155
2.400
2.652
3.157
1.275
1.650
2.907
.553
.739
.864
.989
1.744
1.994
2.231
Wt.
Lb.
.0012
.0014
.0022
.0028
.0033
.0042
.0054
.0060
.0067
.0087
.0103
.0141
.0164
.0186
.0222
.0017
.0022
.0027
.0033
.0044
.0058
.0066
.0084
.0102
.0132
.0163
.0186
.0213
.0044
.0055
.0072
.0095
.0114
.0134
.0186
.0233
.0050
.0077
.0220
.0011
.0021
.0028
.0032
.0088
.0100
.0132
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-104
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 105
MIL-DTL-5015 Connectors
Accessories
F80 Assembly Instructions
ITT Cannon provides a complete line of crimp insertion and extraction tooling to be used
with CA-F80 contacts as follows.
Power Crimp
Crimp
Locator
Tool*
Head
Locator
TH-70-1
CBT-530
TP567 CBT-600/600B CCH-12-7 CCHP-12-2
CBT-600/600B CCH-8-1 CCHP-8-1
CBT-600/600B CCH-4-1 CCHP-4-1
CBT-600B
CCH-0-1 CCHP-0-9
Gauge
CCH-8-1
CCH-4-1
CCH-0
*The M-22520/1-01 is the MIL standard crimp tool for #12 thru #20 contacts and when
used with crimp #12, 16 and 20 contacts for the CA-F80.
**The CBT-600 is recommended for crimping of #4 thru #12 contacts. The CBT-600B for
#0 thru #8. The appropriate locators and crimp heads are available as shown above.
Crimping Contacts
1. Check the crimp tool to be sure that the proper crimp
head locator is used.
2. Cycle to tool to be sure the indentors are open.
3. Place the contact, mating end first, into the tool.
4. Insert the stripped wire into the hollow end of the
contact. Be sure the wire is inserted as far as it will
go.
5. Close the tool completely to crimp. Unless the tool is
closed completely, the tool will not release the
contact.
6. Remove the crimped contact from the tool. Check the
inspection hole to verify that the wire is fully inserted.
Insertion/Extraction Tools
Insertion and extraction tools used for these connectors
are available for contact sizes 16 thru 0 as shown.
12
8
4
0
Insertion
Tools
CIT-16
(038895-0000)
CIT-12
(038896-0000)
CIT-8
CIT-4
CIT-0
Extraction
Handle
Tools
Color
CET-16-4
Blue
(038888-0004)
CET-12-2
Yellow
(038890-0002)
CET-8
Red
CET-4
Blue
CET-0
Yellow
CBT-520/530
Recommended Wire Stripping
1. Before inserting the contacts, remove the endbell,
grommets, and ferrule from the receptacle. Remove
the endbell, grommet, ferrule, and coupling nut from
the plug. Slide the hardware over the wire bundle in
the proper order for reassembly after all the contacts
are inserted.
2. To assist insertion of contacts, lubricate insert cavities
with isopropyl alcohol. Alcohol will evaporate and
will not leave a conductive film. Caution: Never use
any lubricant other than isopropyl alcohol. Hold the
plug or receptacle body firmly and insert the wired
contacts as far as possible by hand. Starting at one
side of the insulator, work progressively from contact
to contact across the layout. When inserting socket
contacts, be sure to provide fixture space below the
front face to permit length of guide pins for #16 and
#12 contacts to clear insulator face.
3. Place the correct insertion tool on the contact so that
the wire runs along the groove in the tool. (Tool tip
will butt against the shoulder.)
4. Beginning with a cavity on the outer edge of the plug,
apply a slow, even pressure perpendicular to the
insulator face until the contact snaps into position. If
contacts are not inserted all the way prior to
removing insertion tool, do not try to reinsert the
insertion tool. Instead, using the extraction tool, push
the contact back to the position it was in when the
insertion tool was originally placed over the contact
for push-in; otherwise the inside of contact cavity
may be damaged by reinserting the insertion tool.
5. Inspect the front end of the insulator to assure that
the contacts are inserted to the proper depth.
Completion
SIZE 16
SIZE 12
1/4"
SIZE 8
1/4"
SIZE 4
7/16"
SIZE 0
5/8"
11/16"
Contacts
Contact Size
16S
16
12
8
4
0
Contact Part Numbers
F80
Pin
Socket
330-0345-016 031-0554-161
330-0351-016 031-0560-161
330-0351-012 031-0560-121
330-0351-008 031-0560-081
330-0351-004 031-0560-041
330-0351-000 031-0560-001
Guide Pins
Guide pins are used to assist insertion of socket contact
Sizes #16 and #12. Larger sizes do not require guide
pins.
Contact
#16
#12
Guide Pin
226-1017-000
226-1018-000
Wire Hole Fillers
After all the cavities have been filled, slide the hardware
back into position on the barrel. Tighten the endbell
until the ferrule and endbell are flush. Compression of
the grommet in this manner results in maximum sealing
characteristics of the plug.
Extraction of Contacts
1. Select the appropriate tool. (Tool tips are reversible for
either pin or socket.) Place the extraction tool over the
pin or into the socket.
2. Apply a slow, even pressure to push the contact out
of the rear of the insulator.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
CBT-600
Insertion of Contacts
Crimp Tool
Contact
Size
16
A
Circular
Contact Hand Crimp
Size
Tool*
16
M-2252/1-01
12
M-2252/1-01
8
4
0
-
A-105
Wire
Size AWG
20
16/16S
12
8
4
0
ITT Cannon
Part Number
225-1000-000
225-0017-000
225-0018-000
225-0019-000
225-8502-000
225-8503-000
Color
Red
Blue
Yellow
White
Green
Black