Specific Lighting Product Data Sheet M04 CoB Product Series Data Sheet Spec No.: DS23-2016-0113 Effective Date: 12/15/2016 Revision: - LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto SPECIFIC LIGHTING M04 CoB Product Series 1. Description The LiteON CoB Product series is a revolutionary, energy efficient and ultra-compact new light source, combining the lifetime and reliability advantages of Light Emitting Diodes with the brightness of conventional lighting. It gives you total design freedom and unmatched brightness, creating a new opportunities for solid state lighting to displace conventional lighting technologies. 1.1 Features Compact high flux density light source Uniform high quality illumination Streamlined thermal path MacAdam compliant binning structure More energy efficient than incandescent, halogen and fluorescent lamps Instant light with unlimited dimming RoHS compliant and Pb free 1.2 Benefits Features Enhanced optical control Clean white light without pixilation Uniform consistent white light Significantly reduced thermal resistance and increased operating temperatures Lower operating costs Reduced maintenance costs ESD rating is 8KV in HBM 1.3 Naming Rule 1/19 Part No.: M04 CoB Product Series BNS-OD-FC002/A4 SPECIFIC LIGHTING M04 CoB Product Series 1.4 Product List Product VF Series Type LTPL-M04520ZS30-T0 20 37V 3000K LTPL-M04520QS30-T0 20 37V LTPL-M04520ZS40-T0 20 LTPL-M04520ZS50-F1 Part Number CCT Color Bin CRI Lumen Bin 3SDCM 5SDCM ANSI -8%~+8% -15%~+15% 80 ☆ ☆ ☆ ☆ ☆ 3000K 90 ☆ ☆ ☆ ☆ ☆ 37V 4000K 80 ☆ ☆ ☆ ☆ ☆ 20 37V 5000K 80 - ☆ ☆ ☆ ☆ LTPL-M04530ZS30-T0 30 37V 3000K 80 ☆ ☆ ☆ ☆ ☆ LTPL-M04530QS30-T0 30 37V 3000K 90 ☆ ☆ ☆ ☆ ☆ LTPL-M04530ZS40-T0 30 37V 4000K 80 ☆ ☆ ☆ ☆ ☆ LTPL-M04530ZS50-F1 30 37V 5000K 80 - ☆ ☆ ☆ ☆ 2/19 Part No.: M04 CoB Product Series BNS-OD-FC002/A4 SPECIFIC LIGHTING M04 CoB Product Series 2. Outline Dimensions 2.1 Form Factor of M04 series CoB Notes 1. All dimensions are in millimeters. 2. Tolerance is ±0.3mm unless otherwise noted. 2.2 Internal Equivalent Circuit 20 Series Product 30 Series Product Notes 1. LED of equivalent circuit means all series/parallel in CoB package. 3/19 Part No.: M04 CoB Product Series BNS-OD-FC002/A4 SPECIFIC LIGHTING M04 CoB Product Series 3. Absolute Maximum Ratings at Ta=25°C Parameter Power Dissipation Forward Current Thermal Resistance, Junction-Case Junction Temperature Symbol Product Series Rating 20 39.4 30 55.2 20 1000 30 1400 20 0.44 30 0.37 PO IF Rth, J-C Unit W mA °C/W Tj 125 °C Operating Temperature Range Topr -40 to 85 °C Storage Temperature Range Tstg -40 to 100 °C Electrostatic Discharge ESD 8 KV Notes 1. 2. 3. 4. 5. The pulse mode condition is 1/10 duty cycle with 100 msec pulse width. Forbid to be operated at reverse voltage condition. ESD spec is reference to AEC-Q101-001 HBM. The unit of Rth is °C/W electrical. The CoB is recommended soldering temperature under 350degC and could not over 3.5sec. 4/19 Part No.: M04 CoB Product Series BNS-OD-FC002/A4 SPECIFIC LIGHTING M04 CoB Product Series 4. Electro-Optical Characteristics 4.1 Typical Performance Dominant Watt Current VF (V) Flux(lm) VF (V) Flux(lm) Eff.(lm/W) Eff.(lm/W) (mA) @25°C @25°C @85°C @85°C @25°C @85°C CRI CCT 20 80 480 35.5 2696 34.6 2400 158 145 30 80 720 35.8 3977 34.9 3539 154 141 20 90 480 35.5 2238 34.6 1992 131 120 30 90 720 35.8 3301 34.9 2937 128 117 20 80 480 35.5 2858 34.6 2544 168 153 30 80 720 35.8 4215 34.9 3751 164 149 20 80 480 35.5 2885 34.6 2568 169 155 30 80 720 35.8 4255 34.9 3787 165 151 3000K 3000K 4000K 5000K Notes 1. 2. 3. 4. All of VF value are typical, the real bin range please refer page 12 ” VF Binning Parameter”. All of flux value are typical, the real bin range please refer page 12 ”Flux Binning Parameter”. Tolerance of flux is ±7%, tolerance of CCX/CCY is ±0.007, tolerance of CRI is ±2, and tolerance of VF is ±3%. Typical viewing angle is 120deg. 5/19 Part No.: M04 CoB Product Series BNS-OD-FC002/A4 SPECIFIC LIGHTING M04 CoB Product Series 4.2 Forward Current vs. Lumen Voltage M04520 Series Current (mA) Lumen (lm) VF (V) 3000K CRI 80 3000K CRI 90 4000K CRI 80 5000K CRI 80 360 34.5 2106 1748 2233 2254 440 35.1 2500 2075 2650 2675 480 35.5 2696 2238 2858 2885 520 35.8 2892 2401 3066 3095 600 36.5 3286 2727 3483 3516 680 37.1 3679 3054 3900 3937 760 37.8 4073 3380 4317 4358 840 38.4 4466 3707 4734 4779 920 39.1 4859 4033 5150 5199 1000 39.7 5252 4359 5567 5620 6/19 Part No.: M04 CoB Product Series BNS-OD-FC002/A4 SPECIFIC LIGHTING M04 CoB Product Series M04530 Series Current (mA) Lumen (lm) VF (V) 3000K CRI 80 3000K CRI 90 4000K CRI 80 5000K CRI 80 520 34.1 3008 2497 3188 3219 630 35.0 3541 2939 3753 3789 720 35.8 3977 3301 4215 4255 740 36.0 4074 3381 4318 4359 850 36.9 4607 3824 4883 4929 960 37.8 5140 4266 5448 5500 1070 38.6 5673 4708 6013 6070 1180 39.5 6206 5151 6578 6640 1290 40.5 6738 5592 7142 7209 1400 41.4 7271 6035 7707 7779 7/19 Part No.: M04 CoB Product Series BNS-OD-FC002/A4 SPECIFIC LIGHTING M04 CoB Product Series 4.3 Relative Spectral Power Distribution at Typical Current 3000K CRI 80 Series Product 3000K CRI 90 Series Product 4.4 Radiation Characteristics 0° 100% 90% 30° Relative Intensity (%) 80% 70% 60% 60° 50% 40% 30% 20% 10% 0% 90° 60 30° 0° 50 8/19 100 Part No.: M04 CoB Product Series BNS-OD-FC002/A4 SPECIFIC LIGHTING M04 CoB Product Series 4.5. Forward Current vs. Forward Voltage M04520 Series M04530 Series 4.6. Forward Current Degrading Curve 9/19 Part No.: M04 CoB Product Series BNS-OD-FC002/A4 SPECIFIC LIGHTING M04 CoB Product Series 4.7 Relative Intensity vs. Case Temperature 4.8 Relative Forward Voltage vs. Case Temperature 10/19 Part No.: M04 CoB Product Series BNS-OD-FC002/A4 SPECIFIC LIGHTING M04 CoB Product Series 5 CoB Binning Definition Flux Binning Parameter (25℃) Example of M04 Series Product Bin (3000K 20W series) Lumen CODE List of M04 Series Product Parameter Code Unit Lumen (lm) 3000K Lumen CCT C 1830 Bin Range D 1975 FG 2300-2485 E 2130 GI 2485-2890 F 2300 IJ 2890-3120 G 2485 H 2680 I 2890 Lumen Range Bin Code Luminous J lm 3120 Main Bin Flux K 3370 L 3640 M 3925 N 4240 O 4575 P 4940 Q 5330 C D -15%~-8% F -8%~+8% G +8%~+15% Full Bins 11/19 Part No.: M04 CoB Product Series BNS-OD-FC002/A4 SPECIFIC LIGHTING M04 CoB Product Series M04520 Series Lumen Bin Lumen (lm) 3000K CRI 80 3000K CRI 90 4000K CRI 80 5000K CRI 80 Bin Range Bin Range Bin Range Bin Range FG 2300~2485 CD 1830~1975 GH 2485~2680 GH 2485~2680 GH 2485~2680 DE 1975~2130 HI 2680~2890 HI 2680~2890 HI 2680~2890 EF 2130~2300 IJ 2890~3120 IJ 2890~3120 IJ 2890~3120 FG 2300~2485 JK 3120~3370 JK 3120~3370 M04530 Series Lumen Bin Lumen (lm) 3000K CRI 80 3000K CRI 90 4000K CRI 80 5000K CRI 80 Bin Range Bin Range Bin Range Bin Range KL 3370~3640 IJ 2980~3120 LM 3640~3925 LM 3640~3925 LM 3640~3925 JK 3210~3370 MN 3925~4240 MN 3925~4240 MN 3925~4240 JL 3370~3640 NO 4240~4575 NO 4240~4575 NO 4240~4575 LM 3640~3925 OP 4575~4940 OP 4575~4940 Forward Voltage Binning Parameter (25℃) M04520 and M04530 series Parameter Forward Voltage Bin Symbol Min Max Unit Condition V1 VF 33 42 V IF =Typical Current Note: Full Rank on Label Example: V1/HJ/D1 Forward Voltage Rank Luminous Flux Rank Color Rank V1 HJ D1 12/19 Part No.: M04 CoB Product Series BNS-OD-FC002/A4 SPECIFIC LIGHTING M04 CoB Product Series Example of LiteOn CoB MacAdam Ellipse Color Definition (EX: 3000K) Solid line in red/blue/black is 3SDCM/5SDCM/ANSI at 25℃. E3 It is shipping Spec. of LiteOn. E2 E1 Dotted line in light gray is 3SDCM/5SDCM/ANSI at 85℃ and the CCX/CCY center follows ANSI. CIE Center Point 25degC (LiteOn Spec.) 85degC (ANSI) Hot/Cold Factor CCT CCX CCY CCX CCY CCX CCY 3000 0.4361 0.4066 0.4338 0.4030 -0.0023 -0.0036 4000 0.3850 0.3848 0.3818 0.3797 -0.0032 -0.0051 5000 0.3494 0.3631 0.3447 0.3553 -0.0047 -0.0076 Notes 1. 2. 3. 4. LiteOn tester and shipping spec follow the color bin with 25degC CCX/CCY center. The Hot/Cold factor means the CCX/CCY shift from 25degC to 85degC. The Hot/Cold shift is measured by LiteOn CAS 140B instrument system. 2 2 0.5 The ellipse equation expression: SDCM = (g11*(x-x0) + 2*g12*(x-x0)*(y-y0) + g22*(y-y0) ) 13/19 Part No.: M04 CoB Product Series BNS-OD-FC002/A4 SPECIFIC LIGHTING M04 CoB Product Series M045 3000K PN: LTPL-M045 Series 3000K E3 E2 E1 ANSI at 25 ℃ 5-Step at 25 ℃ 3-StepI at 25 ℃ M045 4000K PN: LTPL-M045 Series 4000K G1 G2 3-StepI at 25 ℃ G3 5-Step at 25 ℃ ANSI at 25 ℃ 14/19 Part No.: M04 CoB Product Series BNS-OD-FC002/A4 SPECIFIC LIGHTING M04 CoB Product Series M045 5000K PN: LTPL-M045 Series 5000K H2 ANSI at 25 ℃ H1 5-Step at 25 ℃ 15/19 Part No.: M04 CoB Product Series BNS-OD-FC002/A4 SPECIFIC LIGHTING M04 CoB Product Series 6. Reliability Test Plan Number No Test item Condition Duration Result of Failed High Temperature 1 Tc=85°C, IF =Typical Current 1K hours 0/10 Pass 1K hours 0/10 Pass 500 cycles 0/10 Pass 40K cycles 0/10 Pass Ta=120°C 1K hours 0/10 Pass Ta=-55°C 1K hours 0/10 Pass 0/10 Pass 0/10 Pass Operating Life Wet High 60°C/90%RH, IF =Typical Current(DC) 2 Temperature 30 mins ON/OFF Operating Life -40°C to 125°C, 15minutes dwell, 3 Thermal Shock <10 seconds transfer, measurement in every 250 cycles 40000cycles, 2 mins On/Off, Fast Switch 4 Room temperature(25˚C+/-5˚C), Cycling Test measurement in every 5000 cycles High Temperature 5 Storage Life Low Temperature 6 Storage Life 30 Times (5 shocks 7 Mechanical Shock 1500G, 0.5ms pulse, 5 shocks each 6 axis each 6 axis) 10-2000-10 Hz, log or linear sweep rate, 18 hrs 20G for approximately minute 1.5mm, each (3 times per axis applied three times per axis over 6 hrs. over 6 hrs) Variable Vibration 8 Frequency Criteria for Judging the Damage Criteria for Judgment Item Symbol Test Condition Min. Forward Voltage VF IF =Typical Current Luminous Flux Lm IF =Typical Current CCX & CCY X,Y IF =Typical Current Max. U.S.L. x 1.1 L.S.L. x 0.7 Shift<0.02 Notes: 1.Operating life tests are mounted on thermal heat sink 2..Storage items are only component, not put on heat sink. 16/19 Part No.: M04 CoB Product Series BNS-OD-FC002/A4 SPECIFIC LIGHTING M04 CoB Product Series 7. Packing Specifications Packaging Tray 80pcs LED in one tray MSL level 3 marking Label 1 PART NO.: BIN NO.: BIN BRADE.: Label 2 Label 1 Inner Bag (Dry Pack) 5pcs trays in one bag Inner Box One bag in one box Label 2 Label 2 17/19 Part No.: M04 CoB Product Series BNS-OD-FC002/A4 SPECIFIC LIGHTING M04 CoB Product Series 8. Cautions 8.1 An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs connected in parallel in an application, it is recommended that a current limiting resistor be incorporated in the drive circuit, in series with each LED as shown in circuit below. LED (A) Recommended circuit. (B) The brightness of each LED might appear different due to the differences in the I-V characteristics of those LEDs. 8.2 Do not put any pressure on the light emitting surface either by finger or any hand tool and do not stack the COB products. Stress or pressure may cause damage to the wires of the LED array. 8.3 This product is not designed for the use under any of the following conditions, please confirm the performance and reliability are well enough if you use it under any of the following conditions ・Do not use sulfur-containing materials in commercial products including the materials such as seals and adhesives that may contain sulfur. ・Do not put this product in a place with a lot of moisture (over 85% relative humidity), dew condensation, briny air, and corrosive gas (Cl, H2S, NH3, SO2, NOX, etc.), exposure to a corrosive environment may affect silver plating. 8.4 Storage Before opening inner bag, the storage ambient for the LEDs should not exceed 30°C temperature and 85% relative humidity. After opening inner bag, the storage ambient for the LEDs should not exceed 30°C temperature and 70% relative humidity. It is recommended that LEDs out of their original packaging are soldered within one week. For extended storage out of their original packaging, it is recommended that the LEDs were stored in a sealed container (aluminum moisture proof bag) with appropriate desiccant (moisture absorbent material, such as silica gel) and humidity indicator card. When humidity indicator card changed color, or LEDs stored out of their original packaging for more than a week, LEDs should be baked at about 60℃ for at least 24 hours before soldered. 18/19 Part No.: M04 CoB Product Series BNS-OD-FC002/A4 SPECIFIC LIGHTING M04 CoB Product Series ESD (Electrostatic Discharge) Static Electricity or power surge will damage the LED. Suggestions to prevent ESD damage: Use of a conductive wrist band or anti-electrostatic glove when handling these LEDs. All devices, equipment, and machinery must be properly grounded. Work tables, storage racks, etc. should be properly grounded. Use ion blower to neutralize the static charge which might have built up on surface of the LED’s plastic lens as a result of friction between LEDs during storage and handling. ESD-damaged LEDs will exhibit abnormal characteristics such as high reverse leakage current, low forward voltage, or “no light up” at low currents. To verify for ESD damage, check for “light up” and VF of the suspect LEDs at low currents. 19/19 Part No.: M04 CoB Product Series BNS-OD-FC002/A4