Vishay G16S-B Rack and panel connectors side mount Datasheet

G16
Vishay Dale
Rack and Panel Connectors Side Mount
FEATURES
• Body components available with any desired pin and
socket combination
• Floating contacts aid in withstanding vibration
• Locking device permits secure mount of individual sections
or complete component
MATERIAL SPECIFICATIONS
G16P-AB
G16P-AB
APPLICATIONS
Broad - limited only by those applications requiring physical,
electrical and/or materials specifications exceeding those
indicated.
Standard Body: Glass-filled diallyl phthalate per ASTM
D 5948-96 green, flame retardant
Pin Contacts: Brass
Socket Contacts: Phosphor bronze
Contact Plating: Gold, 10 micro-inches
PHYSICAL SPECIFICATIONS
ELECTRICAL SPECIFICATIONS
Minimum Creepage between Contacts: 0.20" [5.16 mm]
Minimum Air Space between Contacts: 0.16" [3.97 mm]
Maximum Wire Size: #16 AWG
Breakdown Voltage (Contact to Contact):
At sea level: 4000 VRMS
At 70 000 feet [21 336 meters]: 550 VRMS
Current Rating: 13 A
DIMENSIONS in inches [millimeters]
G16P-AB
G16S-AB
0.218
[5.54]
0.218
[5.54]
0.440
[11.1]
0.440
[11.1]
0.250
[6.35]
0.062 [1.59]
Dia. Typ.
Body
0.750
[19.1]
0.250
[6.35]
0.530 [13.5]
0.250
[6.35]
0.089 [2.26] Dia. thru 82°
CSK 0.203 [5.16] Dia.
Both Sides, 1 Hole
Pin Contact
0.340
[8.7]
.0890
.089 [2.26] Dia
0.089 [2.26] Dia.
thru 82° CSK
0.203 [5.16] Dia.
Both Sides,
1 Hole
“C” Ring
0.530
[13.5]
Solder Cup
#16 AWG Wire
0.250
[6.35]
Socket
Contact
0.340
[8.7]
ORDERING INFORMATION
G16
MODEL
G16 - Side Mount with 2
positions for #16 AWG contacts
EXAMPLE 1:
G16P-AB = Connector with pin
contacts in position “A” and “B”
www.vishay.com
23
AB
B
A
CONTACT VARIATIONS
S
P
BODY STYLE
P - Pin style body. S - Socket style body.
These designators are used to identify mating
connectors. If designator 3 is the same, a
connector designated G16P will mate with a
connector designated G16S
EXAMPLE 2:
G16S-AB = Connector with socket
contacts in positions “A” and “B”
(would mate with Example 1 at left)
Designates pin contact positions in
G16P connector and socket contact
positions in a G16S connector
EXAMPLE 3:
G16P-A = Connector with pin
contact in position “A” and a
socket contact in position “B”
For technical questions contact: [email protected]
EXAMPLE 4:
G16S-A = Connector with socket
contact in position “A” and a pin
contact in position “B” (would
mate with Example 3 at left)
Document Number: 36019
Revision: 08-Feb-07
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
Similar pages