LENSES 5mm THREADED LENS for PCB MOUNTED LEDs SPECIFICATIONS MATERIAL Lens Lock washer Retaining ring Seal DESIGN 5mm low profile lens with fresnel rings. MOUNTING Mounts through front of panel. Retaining ring secures the assembly to panel. - Polycarbonate FH Steel, Nickel plate Thermoplastic U.L. 94 V0 Rated EPDM CMC 441 & CMS 442 mounts through a 5/16˝ (8.0mm) hole on 1/2˝ centers. Panel thickness 1/32˝ to 1/8˝. TEST DATA Assembly tested for: Temperature cycle -40°C to +105°C, Water, Ice, Shock/vibration up to 6g at 2000Hz, Solar & UV. Tests conducted by Consolidated Laboratories. U.S. & Foreign Patents Issued and Pending VERSATILITY ® CLIPLITE lenses provide a method of viewing PCB mounted LEDs on a display panel. Designed to accommodate 5mm through-hole LEDs. Permits LED viewing angles of up to 180 degrees. Lenses are available in six colors. EASY THREE STEP PANEL ASSEMBLY BRIGHTNESS ® CLIPLITE lenses enhance the direct viewing of PCB mounted LEDs. Mono, multi-color, infrared, and photo detection devices can be displayed in this manner. LED brightness levels can range from 20 to 40,000mcd. APPLICATION ® CLIPLITE lenses permit the panel display of PCB mounted LED without its physical attachment to front panel. Properly installed, the assembly exceeds NEMA 4 for water, ice and dust conditions. Additionally tested for U.V., solar, temperature cycling, shock and vibration. Also provides circuit protection from ESD. Slide lens through 5/16˝ hole. Slip the lock washer onto lens barrel. While holding lens, twist retaining ring one revolution until secure. LENS ASSEMBLY WITH PCB MOUNTED LEDs INSTALLATION ® CLIPLITE 5mm lenses are easily installed. Simply slip lens through a 5/16 ˝ panel opening, slide lock washer onto lens barrel and twist on retaining ring. PCB mounted LED can then slide in and out of the lens without physical attachment to display panel. If overtightened, retaining ring is designed to slip back into previous thread. Secure by retightening ring. ORDERING CODES CMC 441 RTP MODEL COLOR CMC 441 Standard Threaded 5mm Fresnel Lens CMS 442 Water Tight Threaded 5mm Fresnel Lens RTP ATP GTP BTP YTP CTP CMC 441 ASSEMBLY CONTAINS Lens Lock washer Retaining ring PCB mounted 5mm LED with panel lens assembly. Red Transparent Amber Transparent Green Transparent Blue Transparent Yellow Transparent Clear Transparent CMS 442 ASSEMBLY CONTAINS Lens w/Seal (Exceeds NEMA 4) Lock washer Retaining ring OUTLINE DRAWING RECOMMENDED LEDs CMC 441 (Assembly) CMS 442 (Assembly) STANDARD LENS w/Lockwasher & Retainer WATER TIGHT SEAL w/Lockwasher & Retainer LOCK WASHER RETAINING RING See page 30-31 1.800.522.5546 [email protected] www.VCCLITE.com 15