Online data sheet DML40-2-1211 DML LONG RANGE DISTANCE SENSORS DML40-2-1211 | DML LONG RANGE DISTANCE SENSORS A B C D E F Ordering information Type Part no. DML40-2-1211 1027608 Other models and accessories www.sick.com/DML Detailed technical data Performance Measuring range 0.5 m ... 600 m, on reflective tape "Diamond Grade" 1) 0.5 m ... 800 m, on reflector PL880FS01 2) 0.5 m ... 1,200 m, on reflector OP60 3) H I J K L M N O P Q R S T Resolution ≤ 1 mm Repeatability 6 mm 4) 5) Accuracy ± 10 mm 6) 7) Response time 1 ms ... 600 ms 8) Cycle time 5,120 per sec. Average depth 1/16/64/256/1,024 Output time 1 ms ... 600 ms 8) Light source Laser, infrared Laser class 1 (EN 60825-1:Nov.2001, IEC 60825-1:ÄM2:2001) Typ. light spot size (distance) 20 mm (+ 5 x distance in m) 1) 2) 3) 4) 5) 6) 7) 8) On reflective tape "Diamond Grade" On reflector PL880FS01. On reflector OP60. 6 % ... 90 % remission. Environmental conditions constant, min. warm-up time 30 min, average depth 1,024, statistical error 1 σ. 23 °C air temperature, 977 hPa, min. warm-up time 30 min. When operating in ambient temperatures between +40 °C ... +55 °C the accuracy can decrease by factor 2.5. Dependent on averaging method, averaging depth, timeout, baud rate, data output, and output format. Interfaces Data interface PROFIBUS DP Interface for parametrization RS-232 Mechanics/electronics Supply voltage Vs DC 18 V ... 30 V, limit values Ripple 5 Vpp 1) Power consumption ≤ 6 W 2) 1) 2) 2 May not fall short of or exceed VS tolerances. Without load. DISTANCE SENSORS | SICK Online data sheet | 2016-03-17 13:18:11 Subject to change without notice DML40-2-1211 | DML LONG RANGE DISTANCE SENSORS Initialization time 6s Connection type 1 x terminal connection, 1 x Sub D, 9-pin Weight Approx. 1,200 g Output current IA 100 mA 1) 2) May not fall short of or exceed VS tolerances. Without load. Ambient data Enclosure rating IP 65 Protection class III 1) Electromagnetic compatibility (EMC) EN 55011:1998 Kl. B, Gr.1 EN 6100-6-2:1999 Ambient temperature Operation: –10 °C ... +55 °C Operation with cooling case: –10 °C ... +75 °C Storage: –25 °C ... +70 °C Temperature drift Typ. 0.6 mm/K 2) Typ. 0.3 mm/K 3) Mechanical load 1) 2) 3) Shock: (IEC 60068-2-27, –2-29) Sine: (IEC 60068-2-6) Reference voltage DC 50 V PELV-voltage (EN 50178) -10° C ... 0° C, +40 °C ... +55 °C. 0 °C ... +40 °C. 2016-03-17 13:18:11 | Online data sheet Subject to change without notice DISTANCE SENSORS | SICK 3 DML40-2-1211 | DML LONG RANGE DISTANCE SENSORS Dimensional drawing (Dimensions in mm (inch)) M 1 95 (3.74) 15.5 (0.61) 213.5 (8.41) 56.5 5 139 (5.47) 18 (2.22) 55 M6 21.5 42.5 (0.85) 12.5 6 96 (3.78) (0.14) 8 9 ß (2.17) (0.71) (0.49) 23 4 3.5 H I J K L M N O P Q R S T 70 (2.76) 6 DMT10-2-x2xx DML40-2-x2xx 99.5 (3.92) 1.5 (0.06) A B C D E F 7 (1.67) 102.5 (4.04) ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ Dust protection tube Laser pointer pilot light Alignment sight Function indicator Zero level Mounting hole M6 threaded - 6 mm deep Connector cover PG9 Sub-D, 9-pin Sub-D, 9-pin Connection type DMTxxx-2 RS-232/PROFIBUS Connector 5 1 6 ① ⑤ ⑥ ⑨ 4 9 NReset M NC = normally closed NC = normally closed DISTANCE SENSORS | SICK Online data sheet | 2016-03-17 13:18:11 Subject to change without notice DML40-2-1211 | DML LONG RANGE DISTANCE SENSORS DMTxxx-2 RS-232/PROFIBUS Socket, Sub-D, 9-pin 1 5 6 9 ① ⑤ ⑥ ⑨ NC = normally closed M L+ NC = normally closed DMTxxx-2 RS-232/PROFIBUS PG9 12 1 2 ① Pin 1 ② Pin 2 Connection diagram Connection diagram DMxxx-2-x21x RS-232 RS-232 1 2 3 5 RESET RxD TxD GND Connection type DMxxx-2 RS-232/PROFIBUS, socket 3 B 4 RTS 5 GND 6 +5 V 8 A DMTxxx-2 RS-232/PROFIBUS PG9 1 2 L+ M 2016-03-17 13:18:11 | Online data sheet Subject to change without notice DISTANCE SENSORS | SICK 5 DML40-2-1211 | DML LONG RANGE DISTANCE SENSORS A B C D E F H I J K L M N O P Q R S T Adjustment possible ßàáâ ⑩ ⑪ ⑫ ⑬ Q2 function indicator Q1 function indicator Operating indicator, green Plausibility (measurement error) red Recommended accessories Other models and accessories www.sick.com/DML Brief description Type Part no. BEF-GH-DME 5309130 Connecting cable (female connector - open) 2020319 PL560DG 1016806 Terminal and alignment brackets Alignment unit for DMT/DML, incl. mounting material, steel, zinc coated, mounting hardware included Plug connectors and cables Head A: female connector, D-Sub, 9-pin, straight Head B: cable Cable: serial, unshielded, 3 m Reflectors Reflector plate, reflective tape "Diamond Grade", 665 mm x 665 mm, material base plate: aluminum, screw connection, Screw-on, 4 hole mounting 6 DISTANCE SENSORS | SICK Online data sheet | 2016-03-17 13:18:11 Subject to change without notice Online data sheet SICK at a glance SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applications. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and requirements. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK LifeTime Services provide support throughout the machine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” Worldwide presence: Contacts and other locations – www.sick.com SICK AG | Waldkirch | Germany | www.sick.com