MDP 14, 16 Vishay Dale Thick Film Resistor Networks, Dual-In-Line, Molded DIP, 01, 03, 05 Schematics FEATURES • 0.160" [4.06mm] maximum seated height and rugged, molded case construction. • Highly stable thick film • Low temperature coefficient (- 55°C to + 125°C) ± 100ppm/°C • Reduces total assembly costs • Compatible with automatic inserting equipment • Wide resistance range • Uniform performance characteristics • Available in tube pack STANDARD ELECTRICAL SPECIFICATIONS MODEL/ NO. OF PINS SCHEMATIC RESISTOR RESISTANCE POWER RATING RANGE Max. @ 70°C* W Ω STANDARD TOLERANCE % TEMPERATURE TCR COEFFICIENT TRACKING** (- 55°C to + 125°C) (- 55°C to + 125°C) ppm/°C ppm/°C WEIGHT g MDP 14 01 03 05 0.125 0.250 0.125 10 - 2.2M 10 - 2.2M Consult factory ± 1, ± 2, ± 5 ± 1, ± 2, ± 5 ± 1, ± 2, ± 5 ± 100 ± 50 ± 50 ± 100 1.3 MDP 16 01 03 05 0.125 0.250 0.125 10 - 2.2M 10 - 2.2M Consult factory ± 1, ± 2, ± 5 ± 1, ± 2, ± 5 ± 1, ± 2, ± 5 ± 100 ± 50 ± 50 ± 100 1.5 * For resistor power ratings @ + 25°C see derating curves. ** Tighter tracking available ORDERING INFORMATION 01 and 03 Schematics MDP MODEL 14 NUMBER OF PINS 01 03 SCHEMATIC 101 RESISTANCE VALUE G TOLERANCE F = ± 1% G= ± 2% J = ± 5% First 2 digits (3 for "F" tolerance) are significant figures. Last digit specifies number of zeros to follow. 05 Schematic MDP MODEL 14 NUMBER OF PINS 05 SCHEMATIC 221 RESISTANCE VALUE R1 271 RESISTANCE VALUE R2 First two digits (3 for "F" tolerance) are significant figures. The last digit specifies the number of zeros to follow. EXAMPLE: MDP14-03-101G = A dual-in-line thick film resistor network with 14 pins on 0.100" [2.54mm] centers, 03 Schematic, resistance of 100 ohm and a tolerance of ± 2%. www.vishay.com 40 G TOLERANCE F = ± 1% G= ± 2% J = ± 5% EXAMPLE: MDP14-05-221/271G = A 14 pin dual-in-line thick film resistor network with 12 series pair of resistors of 220 ohm and 270 ohm per pair and a tolerance of ± 2%. For Technical Questions, contact: [email protected] Document Number: 31511 Revision 06-Aug-02 MDP 14, 16 Thick Film Resistor Networks, DIP, Molded Vishay Dale DIMENSIONS in inches [millimeters] 0.120 ± 0.005 [3.05 ± 0.127] A ± 0.010 [0.254] 0.310 ± 0.010 [7.87 ± 0.254] 0.250 ± 0.005 [6.35 ± 0.127] 0.030 [0.762] Typ. Pin #1 Identification 0.075 ± 0.015 [1.90 ± 0.381] Pin #1 0.018 ± 0.003 [0.457 ± 0.076] 0.100 ± 0.010 [2.54 ± 0.254] Non-Accumulative Tol. "C" Spaces 0.130 + 0.015 - 0.010 [3.30 + 0.381 - 0.254] 0.050 ± 0.005 [1.27 ± 0.127] B ± 0.010 [0.254] 0.010 + 0.005 - 0.002 [0.254 + 0.127 - 0.051] 0.290 Min. 0.320 Nom. 0.360 Max. [7.37 Min. 8.13 Nom. 9.14 Max.] MODEL A B C MDP 14 0.750 [19.05] 0.600 [15.24] 6 MDP 16 0.850 [21.59] 0.700 [17.78] 7 TECHNICAL SPECIFICATIONS PARAMETER UNIT MDP-14 MDP-16 Package Power Rating (Maximum at + 70°C) W 1.73 1.92 Voltage Coefficient of Resistance Veff < 50ppm typical VAC 200 Insulation Resistance Ω > 10,000M minimum Operating Temperature Range °C - 55 to + 125 Storage Temperature Range: °C - 55 to + 150 Dielectric Strength MECHANICAL SPECIFICATIONS Marking Resistance to Solvents: Permanency testing per MIL-STD-202, Method 215. Solderability: Per MIL-STD-202, Method 208E. Body: Molded epoxy. Terminals: Copper alloy, tin-lead plated. Weight: 14 pin = 1.3 grams; 16 pin = 1.5 grams Document Number: 31511 Revision 06-Aug-02 For Technical Questions, contact: [email protected] www.vishay.com 41 MDP 14, 16 Vishay Dale Power Rating (Watts) Thick Film Resistor Networks, DIP, Molded 16 Pin Package 3.00 14 Pin Package 2.70 Single Resistor 03 0.380 01 and 05 0.190 - 50 + 25 + 70 + 125 + 150 Ambient Temperature °C Derating CIRCUIT APPLICATIONS 01 Schematic 13 and 15 resistors with one pin common The MDPXX-01 circuit provides a choice of 13 and 15 nominally equal resistors, each connected between a common pin (14 and 16) and a discrete PC board pin. Commonly used in the following applications: • MOS/ROM Pull-up/Pull-down • TTL Input Pull-down • Open Collector Pull-up • Digital Pulse Squaring • "Wired OR" Pull-up • TTL Unused Gate Pull-up • Power Driven Pull-up • High Speed Parallel Pull-up • • • • • • • • MDP14-01 Pin #1 MDP16-01 03 Schematic 7 and 8 isolated resistors The MDPXX-03 provides a choice of 7 and 8 nominally equal resistors, each resistor isolated from all others and wired directly across. Commonly used in the following applications: • "Wired OR" Pull-up • Long-line Impedance Balancing • Power Driven Pull-up • LED Current Limiting • Powergate Pull-up • ECL Output Pull-down • Line Termination • TTL Input Pull-down MDP14-03 Pin #1 MDP16-03 05 Schematic R1 R1 R2 R1 R2 Pin #1 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R2 R1 R2 TTL dual-line terminator; pulse squaring R1 R2 R1 R2 The MDPXX-05 circuit contains 12 and 14 series pair of resistors. Each series pair is connected between ground and a common line. The junction of these resistor pairs is connected to the input terminals. The 05 circuits are designed for TTL dual-line termination and pulse squaring. MDP14-05, MDP16-05 Standard E-24 resistance values stocked. Consult factory www.vishay.com 42 For Technical Questions, contact: [email protected] Document Number: 31511 Revision 06-Aug-02 MDP 14, 16 Thick Film Resistor Networks, DIP, Molded Vishay Dale PERFORMANCE MAX. ∆R (Typical Test Lots) TEST CONDITIONS Power Conditioning 1.5 rated power, applied 1.5 hours “ON” and 0.5 hour “OFF” for 100 hours ± 4 hours at + 25°C ambient temperature ± 0.50% ∆R Thermal Shock 5 cycles between - 65°C and + 125°C ± 0.50% ∆R Short Time Overload 2.5 x rated working voltage 5 seconds ± 0.25% ∆R Low Temperature Operation 45 minutes at full rated working voltage at - 65°C ± 0.25% ∆R Moisture Resistance 240 hours with humidity ranging from 80% RH to 98% RH ± 0.50% ∆R Resistance to Soldering Heat Leads immersed in + 350°C solder to within 1/16" of device body for 3 seconds ± 0.25% ∆R Shock Total of 18 shocks at 100 G's ± 0.25% ∆R Vibration 12 hours at maximum of 20 G's between 10 and 2,000 Hz ± 0.25% ∆R Load Life 1000 hours at + 70°C, rated power applied 1.5 hours “ON, 0.5 hour “OFF” for full 1000 hour period. Derated according to the curve. ± 1.00% ∆R Terminal Strength 4.5 pound pull for 30 seconds ± 0.25% ∆R Insulation Resistance 10,000 Megohm (minimum) — Dielectric Withstanding Voltage No evidence of arcing or damage (200 VRMS for 1 minute) — Document Number: 31511 Revision 06-Aug-02 For Technical Questions, contact: [email protected] www.vishay.com 43