CMOS Oscillator -55+125°C Low Jitter MCSO2F Specifications 2011/65/EU MCSO2F: 10.0kHz ~ 20.0MHz MCSO2FH: 20.0 ~ 225MHz Product Parameters MCSO2F Frequency range: 10.0kHz ~ 225MHz Supply voltage (VDD): +3.3V (±5%) +2.5V (±5%) V W ±100ppm ±50ppm tighter stabilities on request T specify Operating temperature range: 0 to +70°C -40 to +85°C -55 to +125°C A B C Storage temperature range: -55 to +125°C Frequency stability*: 5.00 ±0.01 3.20 ±0.01 1.70 (max) SOLDER PAD LAYOUT 1 2 4 3 4 3 1.60 Supply current: 1.00 1 2 Logic levels: 1.50 2.70 1.50 TOP VIEW 2.35 3pF min, 47pF max ‘0’ level = +0.4V max ‘1’ level = VDD-0.5V min Load: 1.00 5ms max Waveform symmetry: 40:60 max @ 50%VDD Start up time: Features < 2ps (≤20.0MHz) < 10ps (>20.0MHz) 7ns max ≤20MHz 3ns max >20MHz 150ns max@ 32.768kHz Enable / disable function: None (pad 1 NC) Tristate* (control via pad 1) * not available under 500kHz Jitter RMS (1): Low jitter See table CMOS Driving ability: 1.60 Rise / fall times: Military temperature range -55+125°C option Excellent shock & vibration resistance Enable / disable tristate option (>500kHz) Wide frequency range available Enable / Disable Function Input (pad 1) Output (pad 3) Open ‘1’ level ‘0’ level Enabled Enabled High Impedance Option Codes Shock resistance: 5,000G, 0.3ms, ½ sine Vibration resistance: 20G rms 10.0 ~ 2,000Hz Soldering condition: 260°C, 10 sec max E Standard. Optional - Please specify required code(s) when ordering * Frequency stability is inclusive of calibration @ 25°C, operating temperature range, supply voltage change, load change and ageing over 10 years. Supply current Freq / Supply 2.5V 3.3V 32kHz <10MHz 10 ~ 20MHz >20 ~ 160MHz 300μA 2mA 3mA 25mA 1mA 4mA 5mA 30mA Maximum values, no load. Ordering Information Product name + option codes + frequency eg: MCSO2FV/CE 10.0MHz 3.3V ±100ppm -55 to +125°C Enable / disable For frequencies 20.0MHz add an 'H' to the product name eg: MCSO2FHW/TB 32.0MHz 2.5V ±50ppm -40 to +85°C no E/D Option code X (eg MCSO2F/X) denotes a custom specification. Packed in trays (128pcs/tray) or T&R 250 ~ 1,000pcs/reel A 47nF ceramic capacitor must be connected between GND and VDD Tel: +44 1460 256 100 17 Dec 2015 Fax: +44 1460 256 101 E-mail: [email protected] Web: www.golledge.com