Surface Mount Bandpass Filter 50Ω CBP-670F+ 645 to 695 MHz The Big Deal • Sharp roll-off • Low passband Insertion Loss • Miniature shielded package CASE STYLE: KV1710 Product Overview CBP-670F+ is a ceramic-coaxial-resonator based bandpass filter in a shielded package fabricated using SMT technology. This filter offers outstanding close in rejection, low insertion loss for use in digital television, point-to-point radio and test and measurements. Key Features Feature Advantages High Selectivity The CBP-670F+ filter incorporates High-Q ceramic resonators that enables sharp rejection near passband. Low Passband VSWR This filter maintains typical VSWR over a wide passband frequency range making this filter easier to integrate into receiver and transmitter RF chains with less concerns for in band frequency ripple. Rugged construction The CBP-670F+ has been qualified over wide range of thermal, mechanical and environmental conditions including withstanding the stress of extensive solder reflow cycles. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 1 of 3 Surface Mount Bandpass Filter 50Ω CBP-670F+ 645 to 695 MHz CASE STYLE: KV1710 Features • Sharp roll-off • Low Passband Insertion loss • Miniature shielded package Electrical Specifications at 25°C Parameter Pass Band Applications Stop Band, Lower • • • • Stop Band, Upper Digital television Wireless microphones Test and measurement Point-to-point radio Center Frequency Insertion Loss VSWR Insertion Loss VSWR Insertion Loss VSWR F# Frequency (MHz) Min. Typ. Max. Unit - 645-695 645-695 DC-613 DC-613 728-1500 728-1500 20.0 670 1.9 1.5 31.6 20.0 29.1 20.0 3.0 1.9 MHz dB :1 dB :1 dB :1 F1-F2 F1-F2 DC-F3 DC-F3 F4-F5 F4-F5 20.0 - - Maximum Ratings Functional Schematic RF IN Operating Temperature Storage Temperature RF Power Input -40°C to 85°C -55°C to 100°C 5 W max. Permanent damage may occur if any of these limits are exceeded. RF OUT Typical Performance Data at 25°C Frequency (MHz) Typical Frequency Response FREQUENCY (MHz) F3 F1 F2 F4 F5 INSERTION LOSS (dB) CBP-670F+ INSERTION LOSS (Full band) Group Delay (nsec) CBP-670F+ INSERTION LOSS (Pass band) 0 INSERTION LOSS (dB) INSERTION LOSS (dB) +RoHS Compliant Frequency (MHz) 1 101.59 347.44 645 26.16 30 93.10 579.06 647 24.78 100 104.24 579.06 649 23.70 350 86.32 248.17 650 23.25 500 78.50 124.09 652 22.48 613 34.15 29.46 654 21.85 616 30.30 25.56 656 21.32 623 20.20 16.11 658 20.86 635 3.34 1.84 670 19.44 645 1.68 1.03 672 19.43 670 1.33 1.16 674 19.47 695 1.57 1.15 676 19.54 705 3.25 1.98 678 19.64 719 20.93 26.33 680 19.76 728 30.92 46.96 682 19.95 900 71.47 102.19 684 20.21 1000 65.50 91.43 686 20.56 1100 69.33 86.86 688 21.03 1450 62.18 72.39 691 21.93 1500 71.49 64.35 695 23.74 0 The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications VSWR (:1) 25 50 75 100 125 5 1.20 10 1.40 1.60 15 645 0 500 1000 FREQUENCY (MHz) 1500 620 645 CBP-670F+ VSWR 695 670 695 FREQUENCY (MHz) 720 CBP-670F+ GROUP DELAY 27 10000 1.30 1.15 1000 1.00 645 VSWR 670 20 GROUP DELAY (ns) DC Insertion Loss (dB) 670 695 100 10 25 23 21 19 1 0 500 1000 FREQUENCY (MHz) 1500 645 655 665 675 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] 685 695 REV.OR M156148 CBP-670F+ EDU1921/1 URJ 161005 Page 2 of 3 CBP-670F+ Bandpass Filter Pad Connections Outline Drawing INPUT 1 OUTPUT GROUND INDEX 16 17 12 15 13 14 1 12 2 11 3 10 2,3,4,5,6,7,8,9,10,11,13,14,15,16,17 METALLIZATION B SOLDER RESIST 4 Demo Board MCL P/N: TB-693+ Suggested PCB Layout (PL-378) 5 6 7 8 9 A D C SUGGESTED PCB LAND PATTERN E T 5 4 6 8 7 9 3 10 2 11 Z X U L K Y S R V G 12 1 F 17 16 15 14 13 W M N H Q P Outline Dimensions ( inch mm ) A 1.050 26.67 B .875 22.23 C .239 6.07 D .125 3.18 E .160 4.06 F .160 4.06 G .278 7.06 H .205 5.21 J .160 4.06 K .070 1.78 L .150 3.81 P 1.090 27.69 Q .870 22.10 R .915 23.24 S .625 15.88 T .710 18.03 U .695 17.65 V .870 22.10 W .390 9.91 X .110 2.79 Y .070 1.78 Z .458 11.63 M .090 2.29 N .130 3.30 Wt. grams 8.5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 3 of 3