FSP FSP450-50ERN Specification describes a 450 watts power supply. Datasheet

PC PSU
FSP450-50ERN
DESCRIPTION
This specification describes a 450 watts power supply. With
5 output, and remote ON/OFF control for ATX-12V system
and a “Power factor correction (active PFC )” circuit at
100V-240Vac.
APPLICATION
Desktop
W ATTAGE
Wattage:
450W
DIMENSION
Dimension:
140mm(L) x 150mm(W) x
86mm(H)
SAFETY STANDARD APPAOVAL
80PLUS Silver
<0.5W
100~240Vac
GENERAL SPECIFICATION
PRODUCT HIGHLIGHT
Efficiency Level:
Erp Lot:
Input Voltage:
INPUT SPECIFICATION
Input Range:
Input Frequency:
Input Current:
100-240 Vac
47-63 Hz
7Amp (maximum) at 100127Vrms/ 60 Hz 3.5Amp
(maximum) at 200-240 Vrms/
50 Hz.
ENVIRONMENTAL SPECIFICATION
TEMP.Range:
MTBF:
OUTPUT SPECIFICATION
Output Rise Time:
Efficiency:
80PLUS Silver
PWOK Delay Time: 500ms > PWOK > 100ms
EMC Performance: EN55022 class B
EN55024
EN 61000-3-2
EN 61000-3-3
+3.3V 20mS (maximum)
+5V 20mS (max
+12 V 20mS (maximum)
-12 V 20mS (maximum)
*Output Voltage and C urrent Rating
+3.3V
Ripple-Noise(R-P) mV
50mV
Regulation Load %
±5%
Output Max.(A)
24A
Output Min.(A)
0.2A
+5V
50mV
±5%
15A
1A
+12V1
5mV
±5%
36A
0.05A
NOTES
+3.3V & +5V total output not exceed 120W.
When +5V is load to 15A, the +3.3V maximum load is 13.63A.
When +3.3V is load to 24A, the +5V maximum load is 8A.
This content is subject to change, please refer to specification for m ore detail.
FSP reserve the right to change the content without prior notice
Storage Temperature: -40°C to +
70℃
The power supply reliability, when
calculated by “Bellcore” latest
revision are exceed 100,000 hours
with all output at maximum load and
an ambient temperature of 25℃.
-12V
200mV
±10%
0.3A
0A
+5Vsb
50mV
±5%
3A
0A
Similar pages