ETC2 LED25W-72-C0350-XX Switch mode led drivers constant current & constant voltage with isolation black magic thermal advantageâ ¢ plastic housing Datasheet

LED-25W Series– Fixed Output and Dimmable
Switch Mode LED Drivers
Constant Current & Constant Voltage with Isolation
Black Magic Thermal Advantage™ Plastic Housing
Electrical Specifications
Input Voltage Range:
100-277 Vac Nom. (90-305 V Min/Max)
Input Over-Voltage:
Can endure 320Vac for 48 Hrs, 350Vac for 2 Hrs
Frequency:
50/60 Hz Nom. (47-63 Hz Min/Max)
Power Factor:
>0.90 @ full load, 100V through 277V
Inrush Current:
<15.0 Amps max @ 230 Vac, cold start 25ºC
Input Current:
0.25 Amps max @ 120 Vac
Maximum Power:
25W
Current Accuracy:
± 1% Over input line variation
Load Regulation:
± 3%
THD:
<
_ 20% @ full load
Leakage Current:
400 µA Typical
Hold Up Time:
Half Cycle
Protection:
utput Over-Voltage, Output Over-Current, and
O
Output Short Circuit Protection with Auto Recovery
• Total Power: 25 Watts
• Input Voltage: 100-277 Vac Nom.
• UL Dry & Damp Location Rated
• High Power Factor
• UL8750 and Class 2 Compliant, as noted
• UL Sign Components Manual (S.A.M. Models)
Environmental Specifications
Minimum Starting Temp:
-30ºC
Maximum Case Temp.
90°C
Storage Temperature:
-40ºC to +85ºC
Humidity:
5% to 95%
Cooling:
Convection
Vibration Frequency:
5 to 55 Hz/2g, 30 minutes
Sound Rating:
Class A
LED25W-56-C0450-XX
450
19-56
25
84%
MTBF:
82,000 Hours at full load and 40ºC ambient conditions
4
per MIL-217F Notice 2
LED25W-40-C0500-XX
500
13-40
20
84%
LED25W-40-C0620-XX
620
13-40
24.8
84%
EMC:
FCC 47CFR Part 15 Class B compliant
LED25W-36-C0700-XX
700
12-36
25
84%
Constant Current
Output Current Output Voltage Max. Output Typical
(mA ±3%)
Range (Vdc)
Power (W) Efficiency
Model Number
LED25W-72-C0350-XX
350
24-72
25
86%
LED25W-40-C0350-XX
350
13-40
14
84%
LED25W-28-C0350-XX
350
10-28
9.8
83%
LED25W-62-C0400-XX
400
21-62
24.8
85%
LED25W-28-C0850-XX
850
10-28
23.8
83%
LED25W-24-C1040-XX
1040
8-24
25
83%
LED25W-20-C1250-XX
1250
7-20
25
83%
LED25W-18-C1400-XX
1400
6-18
25
82%
LED25W-16-C1560-XX
1560
6-16
25
82%
LED25W-14-C1750-XX
1750
5-14
24.5
82%
LED25W-12-C2080-XX
2080
4-12
25
81%
-XX indicates dimming options are available. See options at left. Blank = fixed current output
Ordering Options:
-D: 0-10V & Resistance dimmable version comes with an extra two wires +Purple/-Gray on
the output side. “-D” 0-10V Dimming is compatible with most quality 0-10V wall dimmers.
See page 3 for additional specifications.
-PD:PWM Dimmable version comes with an extra two wires +Purple/-Gray on the output side.
“-PD” version is PWM Dimmable via a positive 10% to 100% Duty Cycle, 200Hz to 1KHz,
0-10V Pulse. See page 4 for additional specifications.
Constant Voltage
Model Number
LED25W-12
LED25W-14
E332160
Max. Output
Power (W)
Typical
Efficiency
12
520-2080
25
81%
14
438-1750
24.5
82%
LED25W-16
16
390-1560
25
82%
LED25W-18
18
360-1400
25
82%
20
313-1250
25
83%
24
28
36
260-1040
213-850
175-700
25
23.8
25
83%
83%
84%
LED25W-40
40
155-620
24.8
84%
LED25W-56
56
113-450
25
84%
LED25W-62
62
100-400
24.8
85%
LED25W-72
72
88-350
25
86%
LED25W-20
Sign Components Manual
•
Output Voltage Output Current
(Vdc ±5%)
Range (mA)
LED25W-24
LED25W-28
LED25W-36
•
• Indicates S.A.M.
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Specifications subject to change without notice.
Class 2:
US/Canada
US Only
Rev 9-11-15
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
LED25W Series
SSL Solutions Faster Than The Speed Of Light®
Pg 2 of 4
Dimensions - IN [mm]
Dimming
Purple (+)
Gray (-)
Output
Red (+)
Blue (-)
Tc = 90°C max
Input
White (N)
Black (L)
WIRE SPECS:
Input Leads: 18 AWG, rated 600 V, 105C, min.
Output Leads: 18 AWG, rated 300 V, 105C, min.
Dimming Leads: 22 AWG, rated 300 V, 105C.
All wires are stranded with solder dipped ends.
Power Factor / Load
1.00
0.90
18%
0.80
16%
0.70
0.50
10%
0.40
6%
0.20
4%
0.10
2%
0.00
50%
60%
70%
80%
Load
90%
0%
50%
100%
Typical Efficiency / Load
130
60%
70%
80%
Load
Lifetime (kHrs)
90%
85%
80%
90%
Lifetime / Case Temperature
100%
Safety and EMC Compliance
UL/CUL
CE
FCC, 47CFR Part 15
EN61000-3-2
EN61000-3-3
EN61000-4-5
115
120Vac
277Vac
95%
Efficiency
8%
0.30
90
75
60
45
UL8750, CSA-C22.2
EN 61347
Class B
Class C
2kV
30
75%
70%
60%
120Vac
277Vac
12%
THD
PF
14%
120Vac
277Vac
0.60
100%
THD / Load
20%
15
70%
80%
90%
Normalized Output Voltage
100%
UL Conditions of Acceptability
See website for additional information
0
45
50
55
60
65
70
75
80
85
Case Hotspot Temperature (°C)
90
Note:
Life calculations are based on reliability with confidence using
a 90% confidence level and <5% failure rate. At a confidence
level of 90% it is expected that <5% of the parts will fail at
the rated life provided. (Failure is defined as a driver drifting
outside specification, rather than fail to operate)
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
LED25W Series
SSL Solutions Faster Than The Speed Of Light®
Pg 3 of 4
“-D” Option: 0-10VDC and Resistance Dimming
Parameters
Minimum
Typical
Maximum
0 mA
-2.0 V
—
—
2 mA
+15 V
Source Current out of 0-10V Purple Wire
Absolute Voltage Range on 0-10V (+) Purple Wire
Typical Dimming Circuit
Dim(+) Purple
LED25W-XX-CXXXX-D
IP710 Wall Dimmer
Dim(-) Gray
(Dimmer must be current-sink type control)
Output Current / 0-10VDC Dimming Control Voltage
Output Current %
100
90
80
70
60
50
40
30
20
10
0
0V
1V
2V
3V
4V
5V
6V
7V
Purple-to-Gray Voltage (Vdc)
8V
9V
10V
Notes:
1.
2.
3.
4.
0-10V dimmable version comes with an extra two wires +Purple/-Gray on the output side.
Compatible with most 0-10V dimmers. Recommended dimmer is Leviton IP710 or equivalent
0-10V dimmable version is not intended to dim below about 5% @ 0V or 10% @ 1.0V
0-10V dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted.
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
LED25W Series
SSL Solutions Faster Than The Speed Of Light®
Pg 4 of 4
“-PD” Option: PWM Dimming
Parameters
Absolute Maximum Voltage Range on PWM Input (Purple Wire)
Input LOW Level Voltage Range (Purple Wire)
Input HIGH Level Voltage Range (Purple Wire)
Sink Current into PWM Input (Purple Wire)
PWM Input Signal Frequency
PWM Input Signal Positive Duty Cycle
Minimum
Typical
Maximum
-2.0V
-2.0
+9.0
0mA
200Hz
0%
10V
0V
10V
——10-90%
+28V
+7.5V
28V
1.2mA
1000Hz
100%
PWM Positive Dimming Typical Circuit
PWM (+) Purple
LED25W-XX-CXXXX-PD
PWM In
PWM (-) Gray
Output Current / Positive Duty Cycle
Output Current %
100
90
80
70
60
50
40
30
20
10
0
0%
10%
20%
30%
40%
50%
60%
Positive Duty Cycle
70%
80%
90%
100%
Notes:
1. PWM Dimmable version comes with an extra 2 wires +Purple/-Gray on the output side.
2. Below 10% Duty cycle proper dimming operation is not assured. Unit is not intended to turn off at <10% Duty Cycle.
3. PWM dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted.
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
Similar pages