CLD-DS112 Rev 1H Product family data sheet Cree® XLamp® MHD-E LEDs Product Description FEATURES Table of Contents The XLamp® MHD-E LED is a new • Flexible 9‑V, 18‑V or 36‑V options Characteristics........................................... 2 generation of high‑power LED that • Maximum drive current: 1400 mA Flux Characteristics, EasyWhite® Order (9 V), 700 mA (18 V), 350 mA (36 V) Codes and Bins - 9 V/18 V......................... 3 delivers a more effective way to achieve low‑cost systems than mid‑power (MP) • Viewing angle: 115° Flux Characteristics, EasyWhite® Order LEDs. Built using Cree’s high‑reliability • Available in 70‑CRI, 80‑CRI and 90‑CRI Codes and Bins - 36 V................................ 5 options Relative Spectral Power Distribution........ 7 MHD-E LED is able to operate at higher • Unlimited floor life at ≤ 30 ºC/85% RH Relative Flux vs. Junction Temperature.... 7 temperatures than MP LEDs with no • Reflow solderable - JEDEC Electrical Characteristics........................... 8 J‑STD‑020C Relative Flux vs. Current............................ 9 ceramic‑package technology, the XLamp reduction in rated lifetime, enabling an impressive 60% reduction in heat • Electrically neutral thermal path Relative Chromaticity vs. Current............ 11 sink size and cost. Using many times • RoHS and REACh compliant Relative Chromaticity vs. Temperature... 12 fewer LEDs than MP LEDs to achieve • UL® recognized component (E349212) Typical Spatial Distribution...................... 13 the same performance, the XLamp Thermal Design........................................ 13 MHD-E LED is optimized to simplify Performance Groups – Luminous Flux.. 15 LED system designs for directional and Performance Groups – Chromaticity...... 15 semi‑directional applications. Cree’s Standard White Chromaticity Regions Plotted on the 1931 CIE Curve.. 16 Bin and Order Code Format..................... 17 Reflow Soldering Characteristics............ 18 Notes........................................................ 19 Mechanical Dimensions.......................... 21 Electrical Configuration........................... 23 Tape and Reel........................................... 24 www.cree.com/Xlamp Packaging................................................. 25 Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 XLamp ® MHD-E LED Characteristics MHD-E 9‑V/18‑V LEDs are tested and binned in production in the 9‑V configuration. MHD-E 36‑V LEDs are tested and binned in production in the 36‑V configuration. See the Mechanical Dimensions section on page 21 for pad layout options. Characteristics Unit Thermal resistance, junction to solder point °C/W 3.2 degrees 115 Temperature coefficient of voltage (9 V) mV/°C -3.75 Temperature coefficient of voltage (18 V)* mV/°C -7.5 Temperature coefficient of voltage (36 V) mV/°C -15 Viewing angle (FWHM) ESD withstand voltage (HBM per Mil-Std-883D) * Minimum Typical Maximum V 8000 DC forward current (9 V) mA 1400 DC forward current (18 V)* mA 700 DC forward current (36 V) mA 350 Reverse current (9 V, 18 V, 36 V)* mA -0.1 Forward voltage (9 V, @ 800 mA, 85 °C) V 9.1 10 Forward voltage (18 V, @ 400 mA, 85 °C)* V 18.2 20 Forward voltage (36 V, @ 200 mA, 85 °C) V 36.3 40 LED junction temperature °C 150 Data for the 18‑V configuration is calculated and for reference only. Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 2 XLamp ® MHD-E LED Flux Characteristics, EasyWhite® Order Codes and Bins - 9 V/18 V The following table provides order codes for XLamp MHD-E LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 17). Test condition: TJ = 85 °C, 9 V, IF = 800 mA Reference condition: TJ = 85 °C, 18 V, IF = 400 mA Nominal CCT CRI Min Minimum Luminous Flux 2-Step 3-Step 5-Step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* H2 900 1007 H4 970 1085 MHDEWT-0000000C0BH465E G4 840 940 MHDEWT-0000000C0HG465E H2 900 1007 H2 900 1007 Group Order Code Group Order Code 70 Group 65E 6500 K 80 65E 70 57E MHDEWT-0000000C0BH265E MHDEWT-0000000C0HH265E MHDEWT-0000000C0BH257E H4 970 1085 MHDEWT-0000000C0BH457E G4 840 940 MHDEWT-0000000C0HG457E H2 900 1007 MHDEWT-0000000C0HH257E H2 900 1007 MHDEWT-0000000C0BH250E H4 970 1085 G4 840 940 H2 900 1007 MHDEWT-0000000C0HH250G F4 730 817 MHDEWT-0000000C0UF450G G2 780 873 5700 K 80 57E 70 5000 K Order Code 50E 80 50G 90 50G MHDEWT-0000000C0HG450G MHDEWT-0000000C0UG250G 50E 50E MHDEWT-0000000C0BH450E MHDEWT-0000000C0HG450E MHDEWT-0000000C0HH250E MHDEWT-0000000C0UF450E MHDEWT-0000000C0UG250E Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 19). • Cree XLamp MHD-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 3 XLamp ® MHD-E LED Flux Characteristics, EasyWhite® Order Codes and Bins - 9 V/18 V - Continued Nominal CCT CRI Min 70 Minimum Luminous Flux Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* G4 840 940 H2 900 1007 H4 970 1085 G2 780 873 G4 840 940 H2 900 1007 F2 680 761 2-Step Group 90 MHDEWT-0000000C0HG240H 40H MHDEWT-0000000C0HG440H MHDEWT-0000000C0UF240H 817 MHDEWT-0000000C0UF440H G2 780 873 MHDEWT-0000000C0HG235H G4 840 940 F2 680 761 35H 3500 K 35H MHDEWT-0000000C0HG435H MHDEWT-0000000C0UF235H F4 730 817 MHDEWT-0000000C0UF435H G2 780 873 MHDEWT-0000000C0HG230H G4 840 940 MHDEWT-0000000C0HG430H F2 680 761 MHDEWT-0000000C0UF230H F4 730 817 G2 780 873 30H 3000 K 90 30H 80 27H MHDEWT-0000000C0UF430H MHDEWT-0000000C0HG227H G4 840 940 MHDEWT-0000000C0HG427H E4 635 710 MHDEWT-0000000C0UE427H F2 680 761 2700 K 90 Order Code MHDEWT-0000000C0BH240E MHDEWT-0000000C0HG240G 40G MHDEWT-0000000C0HH240H 730 80 Group MHDEWT-0000000C0BH440E F4 90 Order Code 40E 40H 80 Group 5-Step MHDEWT-0000000C0BG440E 4000 K 80 Order Code 3-Step 27H MHDEWT-0000000C0UF227H MHDEWT-0000000C0HG440G MHDEWT-0000000C0HH240G 40G 35G 35G 30G 30G 27G 27G MHDEWT-0000000C0UF240G MHDEWT-0000000C0UF440G MHDEWT-0000000C0HG235G MHDEWT-0000000C0HG435G MHDEWT-0000000C0UF235G MHDEWT-0000000C0UF435G MHDEWT-0000000C0HG230G MHDEWT-0000000C0HG430G MHDEWT-0000000C0UF230G MHDEWT-0000000C0UF430G MHDEWT-0000000C0HG227G MHDEWT-0000000C0HG427G MHDEWT-0000000C0UE427G MHDEWT-0000000C0UF227G Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 19). • Cree XLamp MHD-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 4 XLamp ® MHD-E LED Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V The following table provides order codes for XLamp MHD-E LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 17). Test condition: TJ = 85 °C, 36 V, IF = 200 mA Nominal CCT CRI Min Minimum Luminous Flux Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* H2 900 1007 2-Step Group Order Code 3-Step Group Order Code 70 5-Step Group 65E MHDEWT-0000000N0BH265E H4 970 1085 MHDEWT-0000000N0BH465E G4 840 940 MHDEWT-0000000N0HG465E H2 900 1007 MHDEWT-0000000N0HH265E H2 900 1007 MHDEWT-0000000N0BH257E H4 970 1085 MHDEWT-0000000N0BH457E G4 840 940 MHDEWT-0000000N0HG457E H2 900 1007 MHDEWT-0000000N0HH257E H2 900 1007 MHDEWT-0000000N0BH250E H4 970 1085 G4 840 940 6500 K 80 65E 70 57E 5700 K 80 57E 70 5000 K Order Code 50E 80 50G MHDEWT-0000000N0HG450G H2 900 1007 MHDEWT-0000000N0HH250G F4 730 817 MHDEWT-0000000N0UF450G G2 780 873 90 50G MHDEWT-0000000N0UG250G 50E 50E MHDEWT-0000000N0BH450E MHDEWT-0000000N0HG450E MHDEWT-0000000N0HH250E MHDEWT-0000000N0UF450E MHDEWT-0000000N0UG250E Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 19). • Cree XLamp MHD-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 5 XLamp ® MHD-E LED Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V - Continued Nominal CCT CRI Min 70 Minimum Luminous Flux Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* G4 840 940 H2 900 1007 H4 970 1085 G2 780 873 G4 840 940 H2 900 1007 F2 680 761 2-Step Group 90 MHDEWT-0000000N0HG240H 40H MHDEWT-0000000N0HG440H MHDEWT-0000000N0UF240H 817 MHDEWT-0000000N0UF440H G2 780 873 MHDEWT-0000000N0HG235H G4 840 940 F2 680 761 35H 3500 K 35H MHDEWT-0000000N0HG435H MHDEWT-0000000N0UF235H F4 730 817 MHDEWT-0000000N0UF435H G2 780 873 MHDEWT-0000000N0HG230H G4 840 940 MHDEWT-0000000N0HG430H F2 680 761 MHDEWT-0000000N0UF230H F4 730 817 G2 780 873 30H 3000 K 90 30H 80 27H MHDEWT-0000000N0UF430H MHDEWT-0000000N0HG227H G4 840 940 MHDEWT-0000000N0HG427H E4 635 710 MHDEWT-0000000N0UE427H F2 680 761 2700 K 90 Order Code MHDEWT-0000000N0BH240E MHDEWT-0000000N0HG240G 40G MHDEWT-0000000N0HH240H 730 80 Group MHDEWT-0000000N0BH440E F4 90 Order Code 40E 40H 80 Group 5-Step MHDEWT-0000000N0BG440E 4000 K 80 Order Code 3-Step 27H MHDEWT-0000000N0UF227H MHDEWT-0000000N0HG440G MHDEWT-0000000N0HH240G 40G 35G 35G 30G 30G 27G 27G MHDEWT-0000000N0UF240G MHDEWT-0000000N0UF440G MHDEWT-0000000N0HG235G MHDEWT-0000000N0HG435G MHDEWT-0000000N0UF235G MHDEWT-0000000N0UF435G MHDEWT-0000000N0HG230G MHDEWT-0000000N0HG430G MHDEWT-0000000N0UF230G MHDEWT-0000000N0UF430G MHDEWT-0000000N0HG227G MHDEWT-0000000N0HG427G MHDEWT-0000000N0UE427G MHDEWT-0000000N0UF227G Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 19). • Cree XLamp MHD-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 6 XLamp ® MHD-E LED Relative Spectral Power Distribution Relative Spectral Power Distribution 100% Relative Spectral Power 90% 80% 70% 60% 6500 K, 80 CRI 50% 5000 K, 80 CRI 40% 3000 K, 80 CRI 30% 20% 10% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) RelativeFlux Flux vs. Junction Relative Output vs.Temperature Junction Temperature Test condition: 9 V, If = 800 mA; 18 V (for reference), If = 400 mA; 36 V, IF = 200 mA 120% Relative Luminous Flux 100% 80% 60% 40% 20% 0% 25 50 75 100 125 150 Junction Temperature (ºC) Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 7 XLamp ® MHD-E LED Electrical Characteristics (TJ = 85 °C) 1400 Forward Current (mA) 1200 1000 800 9V 600 400 200 0 8.00 8.25 8.50 8.75 9.00 9.25 9.50 9.75 10.00 Forward Voltage (V) 700 600 Forward Current (mA) 500 400 18 V 300 200 100 0 16.0 16.5 17.0 17.5 18.0 18.5 19.0 19.5 20.0 Forward Voltage (V) Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 8 XLamp ® MHD-E LED Electrical Characteristics (Tj = 85ºC) Electrical Characteristics (TJ = 85 °C) - Continued 350 Forward Current (mA) 300 250 200 36 V 150 100 50 0 32 33 34 35 36 37 38 39 40 Forward Voltage (V) Relative Flux vs. Current (TJ = 85 °C) 160% Relative Luminous Flux 140% 120% 100% 9V 80% 60% 40% 20% 0% 0 200 400 600 800 1000 1200 1400 Forward Current (mA) Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 9 XLamp ® MHD-E LED Relative Flux vs. Current (TJ = 85 °C) - Continued 160% Relative Luminous Flux 140% 120% 100% 18 V 80% 60% 40% 20% 0% 0 100 200 300 400 Relative Intensity vs. Current (Tj = 85ºC) Forward Current (mA) 500 600 700 160% Relative Luminous Flux 140% 120% 100% 36 V 80% 60% 40% 20% 0% 0 50 100 150 200 250 300 350 Forward Current (mA) Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 10 XLamp ® MHD-E LED Relative Chromaticity vs. Current (Warm White) 0.015 9V 0.010 0.005 ΔCCx 0.000 ΔCCy -0.005 -0.010 -0.015 200 400 600 800 1000 1200 1400 Current (mA) 0.015 18 V 0.010 0.005 ΔCCx 0.000 ΔCCy -0.005 -0.010 -0.015 100 200 300 400 500 600 700 Current (mA) Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 11 XLamp ® MHD-E LED Relative Chromaticity vs. Current (Warm White) - Continued 0.015 36 V 0.010 0.005 ΔCCx 0.000 ΔCCy -0.005 -0.010 -0.015 50 100 150 200 250 300 350 Current (mA) Relative Chromaticity vs. Temperature (Warm White) Test condition: 9 V, If = 800 mA; 18 V (for reference), If = 400 mA; 36 V, IF = 200 mA 0.015 0.010 0.005 ΔCCx 0.000 ΔCCy -0.005 -0.010 -0.015 25 50 75 100 125 150 Tj (°C) Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 12 XLamp ® MHD-E LED Typical Spatial Distribution Test condition: 9 V, If = 800 mA; 18 V (for reference), If = 400 mA; 36 V, IF = 200 mA Far Field 100% Relative Luminous Intensity 80% 60% 40% 20% -90 -70 -50 -30 -10 0% 10 30 50 70 90 Angle (º) Thermal Design The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. 1500 1400 1300 Maximum Current (mA) 1200 1100 1000 900 800 9V 700 600 500 Rj-a = 5 °C/W 400 Rj-a = 6.5 °C/W 300 Rj-a = 8 °C/W 200 Rj-a = 10 °C/W 100 0 0 20 40 60 80 100 120 140 160 Ambient Temperature (ºC) Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 13 XLamp ® MHD-E LED Thermal Design - Continued 750 700 650 Maximum Current (mA) 600 550 500 450 400 18 V 350 300 250 Rj-a = 5 °C/W 200 Rj-a = 6.5 °C/W 150 Rj-a = 8 °C/W 100 Rj-a = 10 °C/W 50 0 0 20 40 60 80 100 120 140 160 Ambient Temperature (ºC) Thermal Design 375 350 325 Maximum Current (mA) 300 275 250 225 200 36 V 175 150 125 Rj-a = 5 °C/W 100 Rj-a = 6.5 °C/W 75 Rj-a = 8 °C/W 50 Rj-a = 10 °C/W 25 0 0 20 40 60 80 100 120 140 160 Ambient Temperature (ºC) Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 14 XLamp ® MHD-E LED Performance Groups – Luminous Flux (TJ = 85 °C) XLamp MHD-E LEDs are tested for luminous flux and placed into one of the following bins. Group Code Minimum Luminous Flux Maximum Luminous Flux E4 635 680 F2 680 730 F4 730 780 G2 780 840 G4 840 900 H2 900 970 H4 970 1040 J2 1040 1120 Performance Groups – Chromaticity XLamp MHD-E LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite Color Temperatures – 2-Step Code 40H 35H 30H 27H CCT 4000 K 3500 K 3000 K 2700 K x y 0.3777 0.3739 0.3797 0.3816 0.3861 0.3855 0.3838 0.3777 0.4022 0.3858 0.4053 0.3942 0.4125 0.3977 0.4091 0.3891 0.4287 0.3975 0.4328 0.4064 0.4390 0.4086 0.4347 0.3996 0.4524 0.4048 0.4574 0.4140 0.4633 0.4154 0.4581 0.4062 Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 15 XLamp ® MHD-E LED Performance Groups - Chromaticity (Tj = 85 °C) - Continued EasyWhite Color Temperatures – 3-Step Ellipse Major Axis Minor Axis x y a b Rotation Angle (°) 5000 K 0.3447 0.3553 0.00840 0.00312 65.0 4000 K 0.3818 0.3797 0.00939 0.00402 53.7 35G 3500 K 0.4073 0.3917 0.00927 0.00414 53.2 30G 3000 K 0.4338 0.4030 0.00834 0.00408 53.2 27G 2700 K 0.4577 0.4099 0.00834 0.00420 48.5 Major Axis Minor Axis y a b Rotation Angle (°) Bin Code CCT 50G 40G Center Point EasyWhite Color Temperatures – 5-Step Ellipse Bin Code Center Point CCT x 65E 6500 K 0.3123 0.3282 0.01110 0.00550 61.0 57E 5700 K 0.3287 0.3417 0.01230 0.00600 72.0 50E 5000 K 0.3447 0.3553 0.01400 0.00520 65.0 40E 4000 K 0.3818 0.3797 0.01565 0.00670 53.7 Cree’s Standard White Chromaticity Regions Plotted on the 1931 CIE Curve 0.44 ANSI C78.377 Quadrangle 0.43 EasyWhite 5-Step 0.42 EasyWhite 3-Step 0.41 EasyWhite 2-Step 2700 K 3000 K 3500 K 4000 K 0.40 4500 K 0.39 5000 K 0.38 CCy 0.37 5700 K 0.36 6500 K 0.35 0.34 8000 K 0.33 0.32 0.31 0.30 0.29 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.27 0.28 CCx Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 16 XLamp ® MHD-E LED Bin and Order Code Format Bin codes and order codes for MHD-E LEDs are configured in the following manner: Order Code Bin Code Series MHDE = MHD-E Series MHDE = MHD-E Internal code Chromaticity bin CRI Specification B = 70 CRI minimum H = 80 CRI minimum U = 90 CRI minimum Vf class C0 = 9-V/18-V class N0 = 36-V class Chromaticity region SSSSCC-HHHH-HHHGGNFFDDD Flux Vf class C0 = 9-V/18-V class N0 = 36-V class Color WT = White Internal code SSSSCC-WWW-FF-GGN-AAAAA CRI Specification B = 70 CRI minimum H = 80 CRI minimum U = 90 CRI minimum Flux bin Color WT = White Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 17 XLamp ® MHD-E LED Reflow Soldering Characteristics In testing, Cree has found XLamp MHD-E LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. tP TP Critical Zone TL to TP Temperature Ramp-up TL tS Tsmax Tsmin Ramp-down ts Preheat 25 t 25˚C to Peak Profile Feature Average Ramp-Up Rate (Tsmax to Tp) Time Lead-Free Solder 1.2 °C/second Preheat: Temperature Min (Tsmin) 120 °C Preheat: Temperature Max (Tsmax) 170 °C Preheat: Time (tsmin to tsmax) 65-150 seconds Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) 217 °C 45-90 seconds Peak/Classification Temperature (Tp) 235 - 245 °C Time Within 5 °C of Actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 1 - 6 °C/second Time 25 °C to Peak Temperature 4 minutes max. Note: All temperatures refer to the topside of the package, measured on the package body surface. Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 18 XLamp ® MHD-E LED Notes Measurements The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended as specifications. Pre‑Release Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs. Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. Moisture Sensitivity Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp MHD-E LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs in the original MBP. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh Declaration. REACh banned substance information (REACh Article 67) is also available upon request. Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 19 XLamp ® MHD-E LED Notes - Continued UL® Recognized Component Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/ UL 8750. Vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 20 XLamp ® MHD-E LED Mechanical Dimensions Thermal vias, if present, are not shown on these drawings. All measurements 6.70 are ±.13 mm unless otherwise indicated. 7.00 .50 6.70 REF. 4.30 .35 ±0.2 mm 7.00 6.70 6.70 REF. .80 2.95 .71 0.75 ±0.2 mm OPTICAL REFERENCE Top View 6.700 6.700 .700 .700 3.900 .50 7.00 Anode Side 6.70 6.70 .50 .70 4.30 .70 6.760 6.760 6.70 .80 6.70 2.95 6.70 .700 .700 3.900 6.76 Side View 6.70 .70 .70 6.70 REF. Anode Cathode Side 6.70 REF. Side 6.76 6.76 .70 1.24 1.29 .25 .25 .25 .25 6.70 REF. .80 Bottom View PRIMARY .70 ALTERNATIVE 1.29 6.70 REF. 1.29 2.95 REFERENCE 6.700 3.900 Cathode Side 4.30 6.70 PRIMARY .70 1.24 .700 1.29 .700 .700 .700 .35 mm 00 OPTICAL REFERENCE .70 1.24 1.29 .25 6.70 .70 .70 PRIMARY ALTERNATIVE Alternate Bottom View ALTERNATIVE .70 1.24 1.29 .25 6.76 .25 1.29 .25 1.29 Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 21 OF CREE INC. D .70 0.75 .71mm ±0.2 D .35 ±0.2 mm .50 .70 0.75 7.00±0.2 mm 7.00 4.30 6.70 REF. .71 .35 ±0.2 mm 7.00 6.70 REF. 4.30 XLamp ® MHD-E LED 6.70 7.00 .80 6.70 2.95 Mechanical Dimensions - Continued 6 R .80 2.95 C 9‑V/18‑V Class - 9‑V Configuration 36‑V Class C PRIMARY 6.70 .70 6.70 6.70 .70 .70 .70 6 .70 .70 1.29 .70 .70 5 3.90 5 1.24 1.29 .25 3.90 6 1.24 .25 4 4 3 3 NOTICE NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CREE, INC. THIS PLOT B CONFIDENTIAL INFORMATION OF MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY B UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. OF CREE INC. D D REV DESCRIPTION .50 .70.25 .50 4.30 4.30 1.29 7.00 Recommended PCB Solder Pad A 7.00 RECOMMENDED .80AREA (HATCHED 1.29 Recommended Stencil Pattern (Shaded Area Is Open) UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN STENCIL PATTERN.80 MILLIMETERS AND AFTER FINISH. 6.70 SPECIFIED: IS OPEN)RECOMMENDED STENCIL PATTERNTOLERANCE UNLESS .XX ± .25 (HATCHED AREA IS OPEN) .XXX ± .125 X° ± .5 ° THIRD ANGLE PROJECTION FOR SHEET METAL PARTS ONLY THIRD ANGLE PROJECTION .X ± 1.5 2.95 .XX ± .75 .XXX ± .25 X° ± .5 ° RECOMMENDED PCB SOLDER PAD RECOMMENDED PCB SOLDER PAD 2.95 9‑V/18‑V Class - 18‑V Configuration C 5 4 6 6.70 .71 6.70 .70 .70 .70 1.24 6.70 .70 .70 .50 B 6.76 .50 A MATERIAL FOR SHEET METAL PARTS ONLY .X ± 1.5 .XX ± .75 .XXX ± .25 X° ± .5 ° SIZE C SCALE DRAWING NO. 2610-00051-OUTLIN SIZE FINAL PROTECTIVE FINISH C SHEET 15.000 SCALE 1.6 15.000 1 2 ALTERNAT 6.76 .25 3.13 3.13 1.29 ALL DIMENSIONS ARE .13mm UNLESS OTH ALL DIMENSIONS ARE .13mm UNLESS OTHERWISE NOTED .70 .70 STENCIL PATTERN RECOMMENDED STENCILRECOMMENDED PATTERN (HATCHED AREA IS OPENING) (HATCHED AREA IS OPENING) RECOMMENDED PCB SOLDER PAD RECOMMENDED PCB SOLDER PAD Recommended PCB Solder Pad 6 TITLE .70 .70 A Fax (919) 7x7 MHD-E 9V/36V 7x7 MHD-G 18V 1.24 1.29 .70 Phone (9 DATE ALTERNATIVE .25 3.13 APPROVED .50 .50 6.76 3.13 11/12/14 DATE 1.29 .25 1.29 .25 6.76 D. CRONIN TITLE 4600 Silic Durham, DATE DRAWN BY CHECK FINAL PROTECTIVE FINISH PRIMARY PRIMARY .70 .70 DATE D. CRONIN 11/12/14 UNLESS OTHERWISE SPECIFIED CHECK DATE 6.70ARE DIMENSIONS IN MILLIMETERS AND AFTER FINISH. APPROVED TOLERANCE UNLESSDATE SPECIFIED: .XX ± .25 .XXX ± .125 MATERIAL X° ± .5 ° 3 0.75 ±0.2mm 0.75 ±0.2mm 6.70 4 .71 ± .13mm UNLESS OTHERWISE NOTED ALL DIMENSIONS ARE ± .13mm UNLESS OT DRAWN BY SURFACE FINISH: 2 3 5 This configuration should not be used for 36‑V class MHD-E LEDs. B 1.6 SURFACE FINISH: C 6 6.70 REF. 6.70 REF. .70 .25 ALL DIMENSIONS ARE A DESCRIPTION BY 6.70 6.70 6.76 .35 ±0.2mm .35 ±0.2mm 1 REVIS REVISONS 7.00 7.00 6.76 2 2 REV 6.76 6.76 ALTERNA 6.70 .70 .70 ALTERNATIVE PRIMARY 6 5 UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .25 .XXX ± .125 X° PROJECTION ± .5 ° THIRD ANGLE FOR SHEET METAL PARTS ONLY .X ± 1.5 .XX ± .75 .XXX ± .25 X° ± .5 ° Recommended Stencil Pattern (Shaded Area Is Open) THIRD ANGLE PROJECTION 5 4 4 SURFACE FINISH: 3 1.6 3 DRAWN BYOTHERWISEDATE UNLESS SPECIFIED DIMENSIONS ARE IN D. CRONIN 11/17/14 MILLIMETERS AND AFTER FINISH. CHECK DATE TOLERANCE UNLESS SPECIFIED: .XX ± .25 APPROVED .XXX ±DATE .125 X° ± .5 ° FOR SHEET METAL PARTS ONLY .X ± 1.5 .XX ± .75 .XXX ± .25 FINAL PROTECTIVE FINISH X° ± .5 ° D. CRONIN SURFACE FINISH: 2 11/17/14 CHECK DATE APPROVED DATE 4600 S Durham Phone MATERIAL SIZE Fax (91 TITLE TITLE MATERIAL 1.6 DATE DRAWN BY C 7x7 MHD-E 18V 7x7 MHD-G 36V SIZE C 2610-00052-OUTL DRAWING NO. FINAL PROTECTIVE FINISH SCALE 15.000 SCALE 15.00 SHEET 2 Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 22 1 XLamp ® MHD-E LED NEGATIVE (-) Electrical Configuration 18 V 9V SOLDER PAD LINK NEGATIVE (-) POSITIVE (+) NEGATIVE (-) POSITIVE (+) POSITIVE (+) NEGATIVE (-) 9-V Configuration 36 V 18-V Configuration 9V POSITIVE (+) NEGATIVE (-) POSITIVE (+) NEGATIVE (-) POSITIVE (+) NEGATIVE (-) 36-V Configuration Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 23 XLamp ® MHD-E LED Tape and Reel All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard. All measurements are ±.13 mm unless otherwise indicated.. 2.00 [.079] P2 +.0039 1.50+.10 -.00 [ .0591-.0000 ] Do 4.00 [.157] Po 1.75 [.069] E1 CATHODE SIDE 3.0° 7.50 [.295]F 1.50 [.059] D1 MIN 12.00 [.472] P NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTANED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. 5 7.60 [.299] Bo 14.25 [.561] 16.30 [.642] MAX E2 W ANODE SIDE .30 [.012] T 3.0° 6 16.00 [.630] NOMINAL 4 1.70 [.067] Ko 3 2 1 2400-00009 1000 LEDs per reel 7.60 [.299] INDEX QTY ITEM COMMENTS 1 2 1 2 2400-00009-CORE 2400-00009-REEL D D 12.4 +.2 .0 MEASURED AT HUB C 330 +.25 -.75 C 16.4 +0.2 .0 MEASURED AT HUB 1.9±.4 21 ±.4 13.1 ±.2 B B 12.4 +1.0 -.5 MEASURED AT EDGE 60° 60° REVISONS REV A BY DESCRIPTION DATE APP'D Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , XLamp and EasyWhite are registered trademarks and the Cree is a 4600logo Silicon Drive 09/29/09 Durham, N.C 27703 trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Phone (919) 313-5300 ® THIRD ANGLE PROJECTION ® UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .01 .XXX ± .005 X° ± .5 ° DRAWN BY DATE CHECK DATE FOR SHEET METAL PARTS ONLY .X ± .06 .XX ± .03 .XXX ± .010 MATERIAL ® D. CRONIN -- APPROVED -- --- ANTI-STATIC HIPS FINAL PROTECTIVE FINISH Fax (919) 313-5558 DATE 24 TITLE REEL, 13" X 12MM, 3 PIECE SNAP SIZE DRAWING NO. 2400-00009 REV. A XLamp ® MHD-E LED Packaging Humidity Indicator Card (inside bag) Dessicant (inside bag) Unpackaged Reel Label with Cree Bin Code, Quantity, Reel ID Packaged Reel Label with Cree Bin Code, Qty, Lot # Vacuum-Sealed Moisture Barrier Bag Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Label with Custo Code, Qty, Reel I Boxed Reel Label with Cree Order Code, Quantity, Reel ID, PO # Patent Label Label with Cree Bin Code, Quantity, Reel ID Patent Label Copyright © 2015-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 25