M2400 through M2402 Series SPECIFICATION FOR 2.5x2.0 mm SMT CRYSTAL OSCILLATOR Ordering Information: Product Series (Supply Voltage Option) M2400 (3.3V) M2401 (2.5V) M2402 (1.8V) Temperature Range Stability Output Type Symmetry Code Value Code Value 6 -20 to +70 °C 3 ±100 ppm Code F Value Fixed 2 -40 to +85 °C 4 ± 50 ppm Q Standby 6 ± 25 ppm T Tristate 8* ± 20 ppm Example: M240064TCN 25.000000 MHz M2400 6 * Contact factory for availability Code C Value 45/55 CMOS G 40/60 CMOS Code N Frequency MHz Value Leadless xxx.xxxxxx C N 25.000000 Max. Units Conditions 100 MHz T 4 Package/Lead Configuration Electrical Specifications: Parameter Frequency of Operation Symbol Min. FO 1 Typ. Frequency Stability Frequency Stability F/F See Ordering Information ppm Output Output Type Output Load Symmetry (duty cycle) Logic “1” Level Logic “0” Level Rise/Fall Time Start-Up Time HCMOS Compatible TDC VOH VOL TR/TF Tristate or Standby Function 15 55 45 90% VDD 10% VDD 5 10 pF % V V ns ms Ref to ½ VDD HCMOS load HCMOS load 1 – 100 MHz Logic (70% VDD min) or floating Pad 1: Enables output Logic (30% VDD max) to a high-Z state Pad 1: Disables output Supply Voltage & Power Consumption Supply Voltage VDD 2.97 2.25 1.62 3.30 2.50 1.80 IDD Supply Current 3.63 2.75 1.98 6 10 16 V V V mA mA mA M2400 M2401 M2402 1.000 – 20.000 MHz 20.001 – 60.000 MHz 60.001 – 100.000 MHz 10 1.5 1.2 1.0 0.8 0.7 0.5 0.5 0.4 ps ps ps ps ps ps ps ps ps @ 1M (12 kHz to 1 MHz) @ 20M (12 kHz to 20 MHz) @ 25M (12 kHz to 20 MHz) @ 30M (12 kHz to 20 MHz) @ 40M (12 kHz to 20 MHz) @ 50M (12 kHz to 20 MHz) @ 66M (12 kHz to 20 MHz) @ 70M (12 kHz to 20 MHz) @ 100M (12 kHz to 20 MHz) Additional Specifications Phase Jitter 1 of 3 M2400 through M2402 Series SPECIFICATION FOR 2.5x2.0 mm SMT CRYSTAL OSCILLATOR Environmental & Mechanical Requirements: Operating Temperature Storage Temperature Mechanical Shock Vibration Thermal Cycle Hermeticity Solderability Max. Soldering Conditions Package Type TA See Ordering Information °C TS -55 +125 °C Per MIL-STD-202, Method 213, Condition C (100 g’s, 6 ms duration, ½ sinewave) Per MIL-STD-202, Method 201 & 204 (10 g’s from 10-2000 Hz) Per MIL-STD-883, Method 1010, B (-55°C to 125°C, 15 min. dwell, 10 cycles) Per MIL-STD-202, Method 112 (1 x 10-8 atm cc/s of Helium) Per EIAJ-STD-002 See solder profile, Figure 1 2.0 X 2.5 X 1.0 mm, 4-pad leadless ceramic. RoHS 6/6 compliant Dimensions, Marking, and Pin Out Information: Pad 1 2 3 4 Function Tristate, Standby or N/C Ground Output +VDD Part Marking (MHz range) Line 1 xxxMxxx Line 2 M ywwv xxxMxxx y ww v Legend Frequency in MHz Year Work week Factory code Note : Layout should include 0.01 µF or larger bypass capacitor between +Vdd and ground. 2 of 3 M2400 through M2402 Series SPECIFICATION FOR 2.5x2.0 mm SMT CRYSTAL OSCILLATOR Reflow Soldering Conditions: Figure 1 Tape and Reel Specifications: All dimensions are in mm. A 2.4 B 2.9 C 1.55 D 3.5 E 1.2 F 4 G 4 H 8 J 178 K 13 L 21 M 60 MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Rev.0 09/11/17 3 of 3