Multilayer Polymer ESD Suppressor Description ■ This device is an ultra low capacitance PESD product ESDCSA0402V12 designed to protect very high speed data interfaces. ESDCSA0402V12 has a typical capacitance of only 0.15pf (I/O to GND), and it can be used to meet the ESD immunity requirements of IEC61000-4-2 (15KV air, 8KV contact discharge). Feature ■ ESD protection for high speed data lines to ■ ESD contact discharge typical 8KV, max 15KV ■ ESD air discharge typical 15KV, max 25KV ■ Multilayer structure Schematic Diagram ■ Surface mount ■ Extremely low capacitance ■ Very low leakage current ■ Fast response time ■ Bi-directional ESD protection ■ Lead free solder termination ■ The best ESD protection for high frequency, low voltage applications Application ■ High Definition Multi-Media Interface (HDMI) ■ Digital Visual Interface (DVI) ■ Display Port Interface (DP) ■ Unified Display Interface (UDI) ■ Mobile Display Digital Interface (MDDI) Multilayer Polymer ESD Suppressor IEC61000-4-2 ■ Gigabit Ethernet ■ USB2.0 and USB3.0 ■ IEEE1394 interface Caution: This component is designed for signal line protection only, Not intended to be used under bias, not for application with a power line. @copyright Good-Ark2012 1 www.goodark.com ESDCSA0402V12 Absolute Maximum Ratings Parameter Symbol Value Unit Maximum Contact discharge voltage Per IEC61000-4-2 --- 15KV V Maximum Air discharge voltage Per IEC61000-4-2 --- 25KV V Maximum Operating temperature TOPER -40 to +90 ℃ Maximum Storage temperature TSTG -55 to +125 ℃ Maximum lead temperature for soldering during 10s TL 260 ℃ Electrical Characteristics(TA=25℃) Symbol Test Conditions Rated Voltage VR --- --- --- 12 V Trigger voltage VT IEC61000-4-2 8KV contact discharge --- 350 --- V Clamping voltage VC IEC61000-4-2 8KV contact discharge --- 35 --- V Leakage current IL DC 5V shall be applied on component --- 0.1 Capacitance CP VR = 0V, f = 1MHz --- 0.15 Note: Min Typ Max Units uA 0.25 pF 1 Trigger and clamping voltage are measured per IEC 61000-4-2, 8KV contact discharge method. 2 After reliability tests such as high temp storage, temp cycles, continuous ESD strike etc, the maximum leakage current is less than 10uA. ESD Clamping Test ESD TESTER RZ 450 Ω RG 223/U 50 Ω coax 4 GHz DIGITAL 10× OSCILLOSCOPE ATTENUATOR 50 Ω CZ Multilayer Polymer ESD Suppressor Parameter DUT (DEVICE UNDER TEST) IEC 61000-4-2 network CZ = 150 pF; RZ = 330 Ω 2 @copyright Good-Ark2012 www.goodark.com ESDCSA0402V12 ESD Clamping Test Waveforms IPP 100% 90% tr = 0.7 ns to 1ns t 30 ns 60 ns Product Dimension Dimension Parameter Symbol Unit Min Typ Max Length A 0.90 1.05 1.20 Width B 0.45 0.55 0.65 Height C 0.26 0.36 0.46 *1 D 0.15 0.25 0.35 mm Terminal width Multilayer Polymer ESD Suppressor 10% PAD Dimension Symbol Dimension A 0.60 B 0.50 C 0.90 Unit mm 3 @copyright Good-Ark2012 www.goodark.com ESDCSA0402V12 Solder Reflow Recommendations Temperatures (°C) 300 250 200 150 100 0 0 50 100 150 200 250 Time（seconds） Package Information Dimension Typical A0 0.75 B0 1.22 D 1.55 P0 4.00 P1 2.00 P2 2.00 E 1.75 F 3.50 W 8.00 Unit mm Multilayer Polymer ESD Suppressor 50 P1 4 @copyright Good-Ark2012 www.goodark.com ESDCSA0402V12 Part Number System ESDC SA 0402 V12 Rated Voltage Size Standard Type Product Series Order Information Package ESDCSA0402V12 0402 Net Weight 0.44 mg Carrier Tape & Reel HSF Status Quantity 10,000pcs/reel RoHS compliant Revision history Date 1-MAY-2012 Revision 1.0 Description of changes First issue Multilayer Polymer ESD Suppressor Device 5 @copyright Good-Ark2012 www.goodark.com