AC/DC Converter LM30-00J0512-03E FEATURES 30W, AC/DC converter Wide input voltage range: RoHS 85~264VAC/100~370VDC AC and DC all in one (input from the same terminal) Multiplexed output Low standby power consumption, high efficiency, 2K VAC safe isolation voltage Low ripple and noise Output short circuit, over-current, over-voltage protections EMC:IEC/EN61000-4, CISPR22/EN55022 LM30-00J0512-03E---- a metal mask switching power supply offered by MORNSUN. It features universal input voltage, taking both DC and AC input voltage, multiplexed output, high efficiency, high reliability, low power consumption, safer isolation. It offers good EMC performance, certificate IEC/EN61000-4, CISPR22/EN55022standards. The product is widely used in industrial control, office and other power industries. Note: Please refer to Design Reference when module being used in a bad EMC environment. Selection Guide Nominal Output Voltage and Current(Vo/Io) Part No. Output Power (Vo1/Io1) (Vo2/Io2) (Vo3/Io3) (Vo4/Io4) Efficiency (230VAC, %/Typ.) LM30-00J0512-03E 30W 5VDC/2A 12VDC/0.3A -12VDC/0.3A 24VDC/0.5A 83 Max. Capacitive Load (µF) Vo1 Vo2/ Vo3 Vo4 5000 650 900 Input Specifications Item Operating Conditions Input Voltage Range Min. Typ. Max. AC input 85 -- 264 VAC DC input 100 -- 370 VDC 47 -- 63 Hz 115VAC -- -- 0.65 230VAC -- -- 0.40 115VAC -- 30 -- 230VAC -- 50 -- Input Frequency Input Current Inrush Current Hot Plug Unit A Unavailable Output Specifications Item Output Voltage Accuracy Operating Conditions Min. Typ. Max. Main circuit Vo1 -- -- ±1 Auxiliary circuit Vo2, Vo3, Vo4 -- -- ±5 Main circuit Vo1 -- -- ±1 Auxiliary circuit Vo2, Vo3, Vo4 -- -- ±5 Main circuit Vo1 -- -- ±1 Auxiliary circuit Vo2, Vo3, Vo4 -- -- ±5 Main circuit Vo1 -- -- 100 Auxiliary circuit Vo2, Vo3 -- -- 120 Auxiliary circuit Vo4 -- -- 200 Main circuit Vo1 -- ±0.02 -- Auxiliary circuit Vo2, Vo3, Vo4 -- ±0.06 -- 230VAC -- 0.85 -- Line Regulation Full load Load Regulation 10%-100% load Ripple & Noise* Temperature Coefficient Stand-by Power Consumption 20MHz bandwidth (peak-peak value) Unit % mV %/℃ W Short Circuit Protection Hiccup, continuous, self-recovery Over-current Protection ≥120%Io self-recovery 2015.06.08-A/2 Page 1 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation AC/DC Converter LM30-00J0512-03E Over-voltage Protection Zener clamp diode 0 Min. Load Hold-up Time -- -- 115VAC input -- 15 -- 230VAC input -- 115 -- % ms Note: * Ripple and noise are measured by “parallel cable” method, please see AC-DC Converter Application Notes for specific operation. General Specifications Item Operating Conditions Min. Typ. Max. Input-output 2000 -- -- Input- 2000 -- -- 1000 -- -- 500 -- -- Operating Temperature -40 -- +70 Storage Temperature -40 -- +85 -- -- 95 Isolation Voltage Test time: 1min OutputOutput-output Storage Humidity Welding Temperature Wave-soldering 260±5℃; time:5~10s Manual-welding 360±10℃; time:3~5s Switching Frequency Power Derating -- 65 -- -40℃～-25℃ 4.0 -- -- +50℃～+70℃ 3.5 -- -- Safety Standard IEC60950 Safety Class CLASS I MTBF MIL-HDBK-217F@25℃ > 300,000 h Unit VAC ℃ %RH KHz %/℃ Physical Specifications Casing Material Metal case Dimension 109.00*58.50*30.00 mm Weight 180g (Typ.) Cooling Method Free convection EMC Specifications EMI EMS CE CISPR22/EN55022, CLASS B RE CISPR22/EN55022, CLASS B ESD IEC/EN61000-4-2 ±6KV/8KV Perf. Criteria B RS IEC/EN61000-4-3 10V/m perf. Criteria A EFT IEC/EN61000-4-4 ±4KV perf. Criteria B IEC/EN61000-4-5 ±2KV/4KV perf. Criteria B IEC/EN61000-4-5 ±4KV/6KV (See Fig. 2 for recommended circuit) perf. Criteria B CS IEC/EN61000-4-6 10 Vr.m.s perf. Criteria A PFM IEC/EN61000-4-8 10A/m perf. Criteria A Voltage dips, short interruptions and voltage variations immunity IEC/EN61000-4-11 0%-70% perf. Criteria B Surge 2015.06.08-A/2 Page 2 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation AC/DC Converter LM30-00J0512-03E Tempera tu re Derati ng C ur ve Outpu t Power P er cent(%) Outpu t Power P er cen t(%) Product Characteristic Curve 10 0 70 Inp ut volt ag e： 85 ~2 64VAC 10 0~370 VDC 40 30 25 -40 - 25 0 50 Inpu t Voltage Dera ti ng C ur ve 10 0 80 Ambi ent temper atur e: 25℃ 60 40 85 1 00 70 10 0 12 0 264 370 Ambi ent Tem.(℃ ) Inpu t Voltage Note: ①Input voltage should be derated based on temperature derating when it is 85~100VAC/100~120VDC; ②This product is suitable for use in natural air cooling environments, if in a closed environment, please contact our company’s FAE. VAC VDC Design Reference 1. Typical application circuit AC(L) FUSE +Vo1 N TC AC(L) -Vo1 + Vo2 AC /DC C1 C2 TVS1 RL C3 C4 TVS2 RL C5 C6 TVS3 RL C7 C8 TVS4 RL COM AC(N) AC(N) - Vo3 - Vo4 + Vo4 Fig. 1 Model C1/C3/C5/C7(µF) C2 (µF) C4/C6(µF) C8(µF) TVS1 TVS2/ TVS3 TVS4 LM30-00J0512-03 E 1 680 220 120 SMBJ7.0A SMBJ20A SMBJ30A Note: Output filtering capacitor C2/C4/C6/C8 is electrolytic capacitor, it is recommended to use high frequency and low impedance electrolytic capacitor. For capacitance and current of capacitor please refer to manufacture’s datasheet. Capacitor withstand voltage derating should be 80% or above. C1/C3/C5/C7 is ceramic capacitor, which is used to filter high-frequency noise. TVS is a recommended component to protect post-circuits if converter fails. 2. EMC solution-recommended circuit NTC FU SE M OV4 R2 AC(L) AC(L) CY4 M OV2 R3 CX M OV1 LCM CY3 M OV3 R1 GDT4 -Vo1 + Vo2 AC/DC C OM M OV5 AC(N) +Vo1 -Vo3 AC(N) OUTPUT1 OUTPUT2 OUTPUT3 -Vo4 OUTPUT4 +Vo4 Fig 2 2015.06.08-A/2 Page 3 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation AC/DC Converter LM30-00J0512-03E EMC solution-recommended circuit PCB layout Fig 3 Note: Suggestions for safety regulation and wiring width: wire width ≥3mm, distance between wires ≥6mm, and distance between wire and ground ≥6mm Element model MOV1 MOV2 MOV3 MOV4 MOV5 CX CY3/ CY4 R1/R2 R3 LCM GDT4 NTC Recommended value S20K350 S14K350 S14K350 S07K350 S07K350 0.15µF/300VAC 2.2nF/400VAC 2Ω/3W winding resistor 1MΩ/2W 3.3 mH, recommended to use MORNSUN’s FL2D-10-332 B5G3600 5D-11 FUSE 3.15A/250V, slow fusing, necessary 3.For more information about Mornsun EMC Filter products, please visit www.mornsun-power.com to download the Selection Guide of EMC Filter Dimensions and Recommended Layout 2015.06.08-A/2 Page 4 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation AC/DC Converter LM30-00J0512-03E Notes: 1. Packing information please refer to Product Packing Information which can be downloaded from www.mornsun-power.com. Packing bag number: 58220013; 2. If the product is not operated within the required load range, the product performance cannot be guaranteed to comply with all parameters in the datasheet; 3. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25 ℃, humidity<75% with nominal 4. 5. 6. 7. input voltage and rated output load; All index testing methods in this datasheet are based on our Company’s corporate standards; The performance parameters of the product models listed in this manual are as above, but some parameters of non-standard model products may exceed the requirements mentioned above. Please contact our technicians directly for specific information; We can provide product customization service; Specifications are subject to change without prior notice. MORNSUN Guangzhou Science & Technology Co., Ltd. Address: No. 5, Kehui St. 1, Kehui Development Center, Science Ave., Guangzhou Science City, Luogang District, Guangzhou, P. R. China Tel: 86-20-38601850-8801 Fax: 86-20-38601272 E-mail: [email protected] 2015.06.08-A/2 Page 5 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation