Kemet C4AEHBW5300A3JJ Typical applications include dc filtering and energy storage. Datasheet

Printed Circuit Board Mount Power Film Capacitors
C4AE Series, Radial, 2 or 4 Leads, 450 – 1,100 VDC,
for DC Link
Overview
Applications
The C4AE Series is a polypropylene metallized film with
rectangular plastic box type filled with resin and 2 or 4 tinned
copper wires.
Typical applications include DC filtering and energy storage.
Benefits
•
•
•
•
•
•
Self-healing
Low losses
High ripple current
High capacitance density
High contact reliability
Suitable for high frequency applications
Part Number System
C4
AE
G
B
U
4450
A1
W
J
Series
Type
Rated Voltage
(VDC)
Case
Number of
Leads
Capacitance Code (pF)
Lead Diameter
(mm)
Size Code
Tolerance
C4 = MKP
capacitors
AE = Radial
box, dc-link
application
See
Dimension
Table
J = 5%
G = 450
H = 600
J = 700
O = 900
Q = 1,100
B = Plastic
box with
epoxy resin
sealing
U = 2 lead
W = 4 lead
Digits 2 – 4 indicate the
first three digits of the
capacitance value.
First digit indicates the
number of zeros to be
added.
A1 = 0.8
A3 = 1.2
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3046_C4AE_RADIAL • 1/5/2016
1
Power and AC Film Capacitors
Printed Circuit Board Mount Power Film Capacitors – C4AE Series, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link
Dimensions – Millimeters
B
B
L
H
d
LL
p
0.5
0.5
p1
p
p
p1
4pin
Size Code
2pin
p
p1
B
H
L
LL
±0.4
±0.4
Maximum
Maximum
Maximum
+0/-2
W
27.5
11
20
31.5
6
X
27.5
13
25
31.5
6
Y
27.5
14
28
31.5
6
1
27.5
19
29
31.5
6
2
27.5
22
37
31.5
6
F
37.5
10.2
20
40
41.5
6
H
37.5
10.2
24
44
41.5
6
J
37.5
10.2
28
37
42.5
6
L
37.5
20.3
30
45
42
6
M
52.5
20.3
30
45
57.5
6
N
52.5
20.3
35
50
57.5
6
Qualification
Reference Standards
Climatic Category
IEC 61071
40/85/56 according to IEC 60068-1
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3046_C4AE_RADIAL • 1/5/2016
2
Power and AC Film Capacitors
Printed Circuit Board Mount Power Film Capacitors – C4AE Series, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link
General Technical Data
Dielectric
Application
Maximum Operating Temperature
Polypropylene metallized film - non inductive self-healing
DC filtering / DC-Link
+105°C
Upper Temperature TMAX
+85°C IEC 61071, Endurance Test Temperature
Lower Temperature TMIN
-40°C
Protection
"Solvent resistant plastic case UL94 V-0
Thermosetting resin sealing UL94 V-0 compliant"
Installation
Any position
Leads
Packaging
RoHS Compliant
Tinned copper wires
Packed in cardboard trays with protection for the terminals
Compliant with the restricted substance requirements of Directive
2002/95/EC
Electrical Characteristics
Capacitance tolerance
± 5% at +25°C
Dissipation factor (DF)
≤ 0.0002 at 10 kHz and +25°C (±5°C)
Surge voltage
Overvoltage (IEC 61071)
Peak non Repetitive current
Insulation Resistance
Capacitance deviation in operation
Permissible relative humidity
1.5 * VNDC for maximum 10 times in life time at 25°C
1.15 * VNDC for maximum 30 minutes - once per day
1.3 * VNDC for maximum 1 minute - once per day
1.5 * IPKR - maximum 1000 times in life time
IR x C ≥ 30.000 seconds at 100 VDC 1 minute (+25°C)
±1.5% maximum on capacitance value measured at (+25°C)
Annual average ≤ 70%; 85% on 30 days/year randomly distributed
throughout the year. Dewing not admissible
Life Expectancy
Life expectancy
Capacitance drop at end of life
Failure rate IEC 61709
100.000 hours at VNDC @ Hot-Spot temperature THS = +85°C
-5% (typical)
300 FIT at VNDC @ Hot-Spot temperature THS = +85°C
Test Method
Test voltage between terminals
Test voltage between terminals and
case
1.5 * VNDC for 10 seconds or 1.65 VNDC for 2 seconds, at +25°C
3.2 kVac 50 Hz for 2 seconds
Damp Heat
IEC 60068-2-78
Change of temperature
IEC 60068-2-14
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3046_C4AE_RADIAL • 1/5/2016
3
Power and AC Film Capacitors
Printed Circuit Board Mount Power Film Capacitors – C4AE Series, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link
Lifetime Expectancy/Failure Quota Graphs
Lifetime Curve VNDC = 600 V- and VNDC = 700 V-
Lifetime Curve VNDC = 450 VHot Spot
Temperature
[ºC]
1.40
<55
1.30
70
1.20
85
1.10
100
1.00
105
0.90
0.80
10
100
1,000
10,000
100,000
Hot Spot
Temperature
[ºC]
<55
1.50
Voltage Ratio [V/V NDC]
Voltage Ratio [V/V NDC]
1.50
1.40
1.30
85
1.10
100
1.00
105
0.90
0.80
1,000,000
70
1.20
10
100
Lifetime Curve VNDC = 900 V- and VNDC = 1,100 VHot Spot
Temperature
[ºC]
1.40
<55
1.30
85
1.10
100
1.00
105
0.90
0.80
100
1,000
10,000
100,000
1,000,000
1,000,000
Hot Spot
Temperature
[ºC]
100,000
105
10,000
100
1,000
85
100
70
<55
10
1
10
100,000
1,000,000
70
1.20
10,000
FIT @ Hot Spot Temperatures
FIT
Voltage Ratio [V/V NDC]
1.50
1,000
Lifetime Expectancy [h]
Lifetime Expectancy [h]
0.5
0.6
0.7
Lifetime Expectancy [h]
0.8
0.9
1
1.1
1.2
1.3
1.4
V/V NDC
Notes:
THS = TAMB + ΔT
ΔT = ESR * Irms2 * Rth
Irms should be limited to values granting ΔT ≤ 30°C
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3046_C4AE_RADIAL • 1/5/2016
4
Power and AC Film Capacitors
Printed Circuit Board Mount Power Film Capacitors – C4AE Series, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link
Environmental Compliance
As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental effects of
both our capacitors and the production of them.
In Europe (RoHS Directive) and in some other geographical areas like China, legislation has been put in place to prevent the use of
some hazardous materials, like Lead (Pb), in electronic equipment. All products in this catalog are produced to help our customers'
obligations to guarantee their products to fulfill these legislative requirements. The only material of concern in our products has
been Lead (Pb), which has been removed from all designs to fulfill the requirement of containing less than 0.1% of Lead in any
homogeneous material.
KEMET will closely follow any changes in legislation world wide and makes any necessary changes in its products, whenever needed.
Some customer segments like Medical, Military and Automotive Electronics may still require the use of Lead in electrode coatings. To
clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels for RoHS compatible
capacitors.
Because of customer requirements there may appear additional markings like LF = Lead Free or LFW = Lead Free Wires on the label.
Materials & Environment
The selection of materials used by KEMET for the production of capacitors is the result of extensive experience and constant attention
to environmental protection. KEMET selects its suppliers according to ISO 9001 standards and carries out statistical analysis on the
materials purchased before acceptance. All materials are, to the company's present knowledge, non-toxic and free from Cadmium,
Mercury, Chrome and compounds, PCB (Polychlorine Triphenyl), Bromide and Chlorine Dioxins Bromurate Clorurate, CFC and HCFC
and Asbestos.
Green Products
All KEMET power film products are ROHS Compliant.
Insulation Resistance
When the capacitor temperature increases, the insulation resistance decreases. This is due to increased electron activity. Low
insulation resistance can also be the result of moisture trapped in the windings, caused by a prolonged exposure to excessive
humidity.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3046_C4AE_RADIAL • 1/5/2016
5
Power and AC Film Capacitors
Printed Circuit Board Mount Power Film Capacitors – C4AE Series, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link
Dissipation Factor
Dissipation factor is a complex function involved with the inefficiency of the capacitor. The tgδ may change up and down with increased
temperature. For more information, please refer to Performance Characteristics.
Sealing
Hermetically Sealed Capacitors
When the temperature increases, the pressure inside the capacitor increases. If the internal pressure is high enough, it can cause a
breach in the capacitor which can result in leakage, impregnation, filling fluid or moisture susceptibility.
Resin Encased/Wrap & Fill Capacitors
The resin seals on resin encased and wrap and fill capacitors will withstand short-term exposure to high humidity environments without
degradation. Resins and plastic tapes will form a pseudo-impervious barrier to humidity and chemicals. These case materials are
somewhat porous and through osmosis can cause contaminants to enter the capacitor. The second area of contaminated absorption
is the lead-wire/resin interface. Since resins cannot bond 100% to tinned wires, there can be a path formed up to the lead wire into the
capacitor section. Aqueous cleaning of circuit boards can aggravate this condition.
Barometric Pressure
The altitude at which hermetically sealed capacitors are operated controls the voltage rating of the capacitor. As the barometric
pressure decreases, the susceptibility to terminal arc-over increases. Non-hermetic capacitors can be affected by internal stresses due
to pressure changes. This can be in the form of capacitance changes or dielectric arc-over as well as low insulation resistance. Heat
transfer can also be affected by altitude operation. Heat generated in operation cannot be dissipated properly and can result in high RI2
losses and eventual failure.
Radiation
Radiation capabilities of capacitors must be taken into consideration. Electrical degradation in the form of dielectric embitterment can
take place causing shorts or opens.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3046_C4AE_RADIAL • 1/5/2016
6
Power and AC Film Capacitors
Printed Circuit Board Mount Power Film Capacitors – C4AE Series, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link
Table 1 – Ratings & Part Number Reference
Cap
Value
(µF)
VDC
B
H
L
P
P1
4.5
6.8
10
12.5
20
30
35
40
50
75
100
3.3
5.6
7
10
15
20
30
40
55
75
2.7
4
5
8
12.5
15
20
22
30
45
55
60
1.5
2.7
3.3
5
8
12
14
16
20
30
40
1
1.8
2.2
3.3
5
8
10
12
20
25
27
450
450
450
450
450
450
450
450
450
450
450
600
600
600
600
600
600
600
600
600
600
700
700
700
700
700
700
700
700
700
700
700
700
900
900
900
900
900
900
900
900
900
900
900
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
11
13
14
19
22
20
28
24
30
30
35
11
13
14
19
22
20
28
30
30
35
11
13
14
19
22
20
28
24
30
30
35
35
11
13
14
19
22
20
28
24
30
30
35
11
13
14
19
22
20
28
30
30
35
35
20
25
28
29
37
40
37
44
45
45
50
20
25
28
29
37
40
37
45
45
50
20
25
28
29
37
40
37
44
45
45
50
50
20
25
28
29
37
40
37
44
45
45
50
20
25
28
29
37
40
37
45
45
50
50
31.5
31.5
31.5
31.5
31.5
41.5
42.5
41.5
42
57.5
57.5
31.5
31.5
31.5
31.5
31.5
41.5
42.5
42
57.5
57.5
31.5
31.5
31.5
31.5
31.5
41.5
42.5
41.5
42
57.5
57.5
57.5
31.5
31.5
31.5
31.5
31.5
41.5
42.5
41.5
42
57.5
57.5
31.5
31.5
31.5
31.5
31.5
41.5
42.5
42
57.5
57.5
57.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
52.5
52.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
52.5
52.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
52.5
52.5
52.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
52.5
52.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
52.5
52.5
52.5
\
\
\
\
\
10.2
10.2
10.2
20.3
20.3
20.3
\
\
\
\
\
10.2
10.2
20.3
20.3
20.3
\
\
\
\
\
5.1
10.2
10.2
20.3
20.3
20.3
20.3
\
\
\
\
\
10.2
10.2
10.2
20.3
20.3
20.3
\
\
\
\
\
10.2
10.2
20.3
20.3
20.3
20.3
14
15
14
15
15
10
10
10
10
7
7
17
17
17
17
17
11
11
11
8
8
19
19
19
19
19
13
13
13
13
9
9
9
24
24
24
24
24
16
16
16
16
11
11
28
29
29
29
29
20
20
20
13
13
13
Cap Value
(µF)
VDC
B
H
L
P
P1
dV/dt
(V/µs)
Dimensions (mm)
ESR
Irms*
Rth
dV/dt Ipkr
(V/µs)
ESL
Apk
nH
mΩ
Arms
(°C/W)
65
101
145
187
303
298
355
406
508
503
677
55
94
118
169
253
229
337
458
425
579
51
77
96
154
241
196
262
288
389
389
485
530
36
65
79
120
193
190
229
256
321
324
428
28
52
63
95
145
157
196
235
262
331
354
25
25
26
26
28
30
30
30
30
35
35
25
25
26
26
28
30
30
30
35
35
25
25
26
26
28
30
30
30
30
35
35
35
25
25
26
26
28
30
30
30
30
35
35
25
25
26
26
28
30
30
30
35
35
35
14.2
10.0
7.4
6.2
4.8
4.1
3.5
3.1
2.5
3.4
2.6
17.0
10.7
9.0
6.8
5.3
5.3
3.6
2.8
4.1
3.1
18.3
12.9
10.7
7.3
5.5
6.2
4.7
4.3
3.2
4.4
3.6
3.4
26.3
15.3
12.9
9.1
6.6
6.3
5.4
4.8
3.9
5.2
4.0
33.1
19.1
16.0
11.2
8.2
7.9
6.3
5.3
6.5
5.2
4.9
4.5
6.0
7.5
8.5
11.0
13.0
14.0
16.0
18.0
18.0
22.0
4.0
6.0
7.0
8.5
10.5
11.0
14.0
18.0
16.5
20.5
4.0
5.5
6.0
8.0
10.0
10.0
12.5
13.0
16.5
16.0
19.0
19.5
3.5
5.0
5.5
7.0
9.5
10.0
11.5
13.0
15.0
15.0
18.0
3.0
4.5
5.0
6.5
8.5
9.0
11.0
13.0
13.0
16.0
16.5
44
36
33
29
23
20
18
17
15
12
10
44
36
33
29
23
20
18
15
12
10
44
36
33
29
23
20
18
17
15
12
10
10
44
36
33
29
23
20
18
17
15
12
10
44
36
33
29
23
20
18
15
12
10
10
C4AEGBU4450A1WJ
C4AEGBU4680A1XJ
C4AEGBU5100A1YJ
C4AEGBU5125A11J
C4AEGBU5200A12J
C4AEGBW5300A3FJ
C4AEGBW5350A3JJ
C4AEGBW5400A3HJ
C4AEGBW5500A3LJ
C4AEGBW5750A3MJ
C4AEGBW6100A3NJ
C4AEHBU4330A1WJ
C4AEHBU4560A1XJ
C4AEHBU4700A1YJ
C4AEHBU5100A11J
C4AEHBU5150A12J
C4AEHBW5200A3FJ
C4AEHBW5300A3JJ
C4AEHBW5400A3LJ
C4AEHBW5550A3MJ
C4AEHBW5750A3NJ
C4AEJBU4270A1WJ
C4AEJBU4400A1XJ
C4AEJBU4500A1YJ
C4AEJBU4800A11J
C4AEJBU5125A12J
C4AEJBW5150A3FJ
C4AEJBW5200A3JJ
C4AEJBW5220A3HJ
C4AEJBW5300A3LJ
C4AEJBW5450A3MJ
C4AEJBW5550A3NJ
C4AEJBW5600A3NJ
C4AEOBU4150A1WJ
C4AEOBU4270A1XJ
C4AEOBU4330A1YJ
C4AEOBU4500A11J
C4AEOBU4800A12J
C4AEOBW5120A3FJ
C4AEOBW5140A3JJ
C4AEOBW5160A3HJ
C4AEOBW5200A3LJ
C4AEOBW5300A3MJ
C4AEOBW5400A3NJ
C4AEQBU4100A1WJ
C4AEQBU4180A1XJ
C4AEQBU4220A1YJ
C4AEQBU4330A11J
C4AEQBU4500A12J
C4AEQBW4800A3FJ
C4AEQBW5100A3JJ
C4AEQBW5120A3LJ
C4AEQBW5200A3MJ
C4AEQBW5250A3NJ
C4AEQBW5270A3NJ
Ipkr
ESL
ESR
Irms
Rth
Part Number
70°C@10 kHz 70°C@10 kHz (HS/Amb) PART NUMBER
(1) Current values that lead to a ΔT of ~ 15°C in the hot spot → THS = TAMB + ΔT = 70°C + 15°C = 85°C
For Packaging quantities not listed contact KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3046_C4AE_RADIAL • 1/5/2016
7
Power and AC Film Capacitors
Printed Circuit Board Mount Power Film Capacitors – C4AE Series, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link
KEMET Corporation
World Headquarters
Europe
Asia
Southern Europe
Sasso Marconi, Italy
Tel: 39-051-939111
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
Skopje, Macedonia
Tel: 389-2-55-14-623
Shenzhen, China
Tel: 86-755-2518-1306
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Corporate Offices
Fort Lauderdale, FL
Tel: 954-766-2800
Kamen, Germany
Tel: 49-2307-438110
North America
Northern Europe
Wyboston, United Kingdom
Tel: 44-1480-273082
Taipei, Taiwan
Tel: 886-2-27528585
Espoo, Finland
Tel: 358-9-5406-5000
Southeast Asia
Singapore
Tel: 65-6701-8033
2835 KEMET Way
Simpsonville, SC 29681
Northeast
Wilmington, MA
Tel: 978-658-1663
Southeast
Lake Mary, FL
Tel: 407-855-8886
Central
Novi, MI
Tel: 248-994-1030
Beijing, China
Tel: 86-10-5877-1075
Shanghai, China
Tel: 86-21-6447-0707
Seoul, South Korea
Tel: 82-2-6294-0550
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
Irving, TX
Tel: 972-915-6041
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3046_C4AE_RADIAL • 1/5/2016
8
Power and AC Film Capacitors
Printed Circuit Board Mount Power Film Capacitors – C4AE Series, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link
Disclaimer
All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and
verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are
not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use. The Information is intended for use only
by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still
occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3046_C4AE_RADIAL • 1/5/2016
9