Vishay MBA0204DD8FR200 Professional Datasheet

MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
Professional Thin Film Leaded Resistors
FEATURES
• CECC version (IECQ-CECC
according to EN 140101-806)
approved
• Excellent overall stability: class 0.25
• Wide ohmic range: 0.22 Ω to 22 MΩ
• AEC-Q200 qualified available (1)
• Radial version available for MBB/SMA 0207
• Alternative termination wires available for e.g. welding
(MBA/SMA0204 only)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
(1) AEC-Q200 qualified parts are available per tables “Temperature
Coefficient and Resistance Range”.
DESCRIPTION
MBA/SMA 0204, MBB/SMA 0207, and MBE/SMA 0414
professional leaded thin film resistors are the general
purpose resistor for all fields of professional electronics
where reliability and stability is of major concern. Typical
applications
include
industrial,
telecommunication,
automotive, and medical equipment.
APPLICATIONS
• Industrial
• Telecommunication
• Medical equipment
• Automotive
TECHNICAL SPECIFICATIONS
DESCRIPTION
DIN size
CECC size
Resistance range
MBA/SMA 0204
MBB/SMA 0207
MBE/SMA 0414
0204
0207
0414
A
B
D
0.22 Ω to 10 MΩ; 0 Ω
0.22 Ω to 22 MΩ; 0 Ω
0.22 Ω to 22 MΩ
Resistance tolerance
± 5 %; ± 1 %; ± 0.5 %
Temperature coefficient
± 50 ppm/K; ± 25 ppm/K
Rated dissipation, P70 (2)
Operating voltage, Umax. AC/DC
Operating temperature range
0.4 W
0.6 W
1.0 W
200 V
350 V
500 V
(2)
Peak permissible film temperature
-55 °C to 155 °C
(2)
155 °C
155 °C
155 °C
1 min.; Uins
300 V
500 V
800 V
Continuous
75 V
75 V
75 V
≤ 0.1 x 10-9/h
≤ 0.1 x 10-9/h
≤ 0.1 x 10-9/h
Insulation voltage:
Failure rate: FITobserved
Notes
• MB_ series has been merged with the related SMA series to form one series “MB_/SMA__”.
(2) Please refer to APPLICATION INFORMATION below.
Revision: 02-Nov-15
Document Number: 28766
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
APPLICATION INFORMATION
The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow
support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is
not exceeded. Furthermore, a high level of ambient temperature or of power dissipation may raise the temperature of the solder
joint, hence special solder alloys or board materials may be required to maintain the reliability of the assembly.
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift
increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a
functional lifetime. The designer may estimate the performance of the particular resistor application or set certain load and
temperature limits in order to maintain a desired stability.
MAXIMUM RESISTANCE CHANGE AT RATED DISSIPATION
Operation mode
Standard
Power
Climatic category
-55 °C / +125 °C / 56 days
-55 °C / +155 °C / 56 days
MBA/SMA 0204
0.25 W
0.4 W
MBB/SMA 0207
0.4 W
0.6 W
MBE/SMA 0414
0.65 W
1.0 W
125 °C
155 °C
1 Ω to 475 kΩ
1 Ω to 475 kΩ
1000 h
≤ 0.25 %
≤ 0.5 %
8000 h
≤ 0.5 %
≤ 1.0 %
225 000 h
≤ 1.5 %
−
1 Ω to 1 MΩ
1 Ω to 1 MΩ
1000 h
≤ 0.25 %
≤ 0.5 %
8000 h
≤ 0.5 %
≤ 1.0 %
225 000 h
≤ 1.5 %
−
1 Ω to 2.4 MΩ
1 Ω to 2.4 MΩ
1000 h
≤ 0.2 %
≤ 0.4 %
8000 h
≤ 0.4 %
≤ 0.8 %
225 000 h
≤ 1.2 %
−
Rated dissipation, P70
Applied maximum film temperature, ϑF max.
MBA/SMA 0204
MBB/SMA 0207
Max. resistance change at rated
dissipation |ΔR/R max.|, after:
MBE/SMA 0414
Revision: 02-Nov-15
Document Number: 28766
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE - Standard Products
TYPE
TCR
± 50 ppm/K
TOLERANCE
RESISTANCE (1)(2)
E-SERIES
±5%
0.22 Ω to 0.91 Ω
E24
±1%
1 Ω to 10 MΩ
E24; E96
± 0.5 %
10 Ω to 475 kΩ
E24; E192
±1%
10 Ω to 475 kΩ
E24; E96
± 0.5 %
10 Ω to 475 kΩ
E24; E192
-
< 10 mΩ; Imax. = 3 A
-
±5%
0.22 Ω to 0.91 Ω
11 MΩ to 22 MΩ
E24
±1%
1 Ω to 10 MΩ
E24; E96
±2%
0.22 Ω to 0.91 Ω
E24
± 0.5 %
10 Ω to 1 MΩ
E24; E192
±1%
10 Ω to 1 MΩ
E24; E96
± 0.5 %
10 Ω to 1 MΩ
E24; E192
-
< 10 mΩ; Imax. = 5 A
-
±5%
0.22 Ω to 0.91 Ω
E24
±1%
1 Ω to 22 MΩ
E24; E96
± 0.5 %
10 Ω to 2.43 MΩ
E24; E192
±1%
10 Ω to 2.43 MΩ
E24; E96
± 0.5 %
10 Ω to 2.43 MΩ
E24; E192
MBA/SMA 0204
± 25 ppm/K
Jumper
± 50 ppm/K
MBB/SMA 0207
± 25 ppm/K
Jumper
± 50 ppm/K
MBE/SMA 0414
± 25 ppm/K
Notes
• Resistance ranges printed in bold are preferred TCR / tolerance combinations with optimized availability.
(1) Resistance value to be selected from E24 series for ± 5 %, ± 2 %, from E24/E96 series for ± 1 % tolerance and from E24/E192 for ± 0.5 %
tolerance.
(2) AEC-Q200 qualification applies to products with TCR = ± 50 ppm/K and tolerance = ± 1 % in the ranges of 10 Ω to 301 kΩ for MBA/SMA
0204, 10 Ω to 7.5 MΩ for MBB/SMA 0207, and 10 Ω to 22 MΩ for MBE/SMA 0414.
Revision: 02-Nov-15
Document Number: 28766
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
PART NUMBER AND PRODUCT DESCRIPTION - Standard Products
PART NUMBER: MBB02070C1001FCT00
M
B
B
0
2
0
7
0
C
1
0
0
1
F
C
T
0
0
TYPE/SIZE
VARIANT
TCR
RESISTANCE
TOLERANCE
PACKAGING
SPECIAL
MBA0204 =
MBA/SMA 0204
MBB0207 =
MBB/SMA 0207
MBE0414 =
MBE/SMA 0414
0 = neutral
N = RB radial
5 mm for
MBB/SMA0207
S = UB radial
2.5 mm for
MBB/SMA0207
I = L0 welding
joint not
lacquered for
MBB/SMA 0207
B = KL
lacquered
welding joint for
MBA/SMA 0204
D = Ni wire for
MBA/SMA 0204
D = ± 25 ppm/K
C = ± 50 ppm/K
Z = jumper
3 digit value
1 digit multiplier
MULTIPLIER
7 = *10-3
8 = *10-2
9 = *10-1
0 = *100
1 = *101
2 = *102
3 = *103
4 = *104
5 = *105
6 = *106
0000 = jumper
D = ± 0.5 %
F=±1%
G=±2%
J=±5%
Z = jumper
CT
C1
RP
R2
R4
N4
00 = standard
Special
termination
wires for
MBA/SMA 0204:
FE = coppered
steel
CA = tinned CuAg
NS = tinned Ni
Product Description: MBB/SMA 0207-50 1 % CT 1K0
MBB/SMA 0207
-
50
1%
TYPE/SIZE
TCR
TOLERANCE
MBA/SMA 0204
MBB/SMA 0207
MBE/SMA 0414
± 25 ppm/K
± 50 ppm/K
± 0.5 %
± 1.0 %
± 2.0 %
± 5.0 %
CT
1K0
VARIANT
PACKAGING
RESISTANCE
RB
UB
L0
KL
CT
C1
RP
R2
R4
N4
1K0 = 1 kΩ
51R1 = 51.1 Ω
Notes
• The products can be ordered using either the PRODUCT DESCRIPTION or the PART NUMBER.
• Standard products are not CECC approved.
• Radial version (RB,UB) cannot be qualified according to CECC so these can only be ordered as standard products.
Revision: 02-Nov-15
Document Number: 28766
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE - CECC Approved Products
TYPE
TCR
± 50 ppm/K
TOLERANCE
RESISTANCE (1)(2)
E-SERIES
±5%
0.22 Ω to 0.91 Ω
E24
±1%
1 Ω to 10 MΩ
E24; E96
± 0.5 %
10 Ω to 475 kΩ
E24; E192
±1%
10 Ω to 475 kΩ
E24; E96
± 0.5 %
10 Ω to 475 kΩ
E24; E192
-
< 10 mΩ; Imax. = 3 A
-
±5%
0.22 Ω to 0.91 Ω
11 MΩ to 22 MΩ
E24
±1%
1 Ω to 10 MΩ
E24; E96
± 0.5 %
10 Ω to 1 MΩ
E24; E192
±1%
10 Ω to 1 MΩ
E24; E96
± 0.5 %
10 Ω to 1 MΩ
E24; E192
-
< 10 mΩ; Imax. = 5 A
-
±5%
0.22 Ω to 0.91 Ω
E24
±1%
1 Ω to 22 MΩ
E24; E96
± 0.5 %
10 Ω to 2.43 MΩ
E24; E192
±1%
10 Ω to 2.43 MΩ
E24; E96
± 0.5 %
10 Ω to 2.43 MΩ
E24; E192
MBA/SMA 0204
± 25 ppm/K
Jumper
± 50 ppm/K
MBB/SMA 0207
± 25 ppm/K
Jumper
± 50 ppm/K
MBE/SMA 0414
± 25 ppm/K
Notes
• Resistance ranges printed in bold are preferred TCR / tolerance combinations with optimized availability.
(1) Resistance value to be selected from E24 series for ± 5 %, from E24/E96 series for ± 1 % tolerance and from E24/E192 for ± 0.5 % tolerance.
(2) AEC-Q200 qualification applies to products with TCR = ± 50 ppm/K and tolerance = ± 1 % in the ranges of 10 Ω to 301 kΩ for MBA/SMA
0204, 10 Ω to 7.5 MΩ for MBB/SMA 0207, and 10 Ω to 22 MΩ for MBE/SMA 0414.
Revision: 02-Nov-15
Document Number: 28766
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
PART NUMBER AND PRODUCT DESCRIPTION - CECC Approved Products
PART NUMBER: MBB0207VC1001FCT00
M
B
B
0
2
0
7
V
C
1
0
0
1
F
C
T
0
0
TYPE/SIZE
VARIANT
TCR
RESISTANCE
TOLERANCE
PACKAGING
SPECIAL
MBA0204 =
MBA/SMA 0204
MBB0207 =
MBB/SMA 0207
MBE0414 =
MBE/SMA 0414
V = CECC 06
D = ± 25 ppm/K
C = ± 50 ppm/K
Z = jumper
3 digit value
1 digit multiplier
MULTIPLIER
7 = *10-3
8 = *10-2
9 = *10-1
0 = *100
1 = *101
2 = *102
3 = *103
4 = *104
5 = *105
6 = *106
0000 = jumper
D = ± 0.5 %
F=±1%
J=±5%
Z = jumper
CT
C1
RP
R2
00 = standard
L0 = welding joint
not lacquered for
MBB/SMA 0207
KL = lacquered
welding joint for
MBA/SMA 0204
Product Description: MBB/SMA 0207-50 1 % CECC 06 CT 1K0
MBB/SMA 0207
-
50
1%
CECC 06
CT
1K0
TYPE/SIZE
TCR
TOLERANCE
VARIANT
PACKAGING
RESISTANCE
MBA/SMA 0204
MBB/SMA 0207
MBE/SMA 0414
± 25 ppm/K
± 50 ppm/K
± 0.5 %
± 1.0 %
± 5.0 %
CECC 06
CECC 06 L0
CECC 06 KL
CT
C1
RP
R2
1K0 = 1 kΩ
51R1 = 51.1 Ω
Notes
• Approval is according to EN 140101-806, version A.
• Radial version (RB, UB) cannot be qualified according to CECC so these can only be ordered as standard products.
PACKAGING
TYPE / SIZE
MBA/SMA 0204
MBB/SMA 0207 (1)
MBB/SMA 0207
UB = 2.5 mm pitch
MBB/SMA 0207
RB = 5 mm pitch
CODE
C1
CT
QUANTITY
1000
5000
RP
5000
C1
1000
CT
5000
RP
5000
N4
4000
R4
4000
N4
4000
R4
4000
C1
1000
MBE/SMA 0414
R2
2500
PACKAGING STYLE
Taped acc. to IEC 60286-1
fan-folded in a box
Taped acc. to IEC 60286-1
on a reel
Taped acc. to IEC 60286-1
fan-folded in a box
Taped acc.to IEC 60286-1
on a reel
Taped acc. to IEC 60286-2
fan-folded in a box
Taped acc. to IEC 60286-2
on a reel
Taped acc. to IEC 60286-2
fan-folded in a box
Taped acc. to IEC 60286-2
on a reel
Taped acc. to IEC 60286-1
fan-folded in a box
Taped acc. to IEC 60286-1
on a reel
WIDTH
PITCH
53 mm
5 mm
53 mm
5 mm
53 mm
5 mm
53 mm
5 mm
-
12.7 mm
DIMENSIONS
184 mm x 75 mm x 42 mm
330 mm x 75 mm x 55 mm
242 mm x 76 mm x 86 mm
184 mm x 74 mm x 42 mm
260 mm x 78 mm x 31 mm
260 mm x 75 mm x 114 mm
324 mm x 77 mm x 82 mm
315 mm x 76 mm x 86 mm
298 mm x 75 mm x 86 mm
330 mm x 262 mm x 45 mm
330 mm x 253 mm x 48 mm
330 mm x 262 mm x 45 mm
-
12.7 mm
330 mm x 253 mm x 48 mm
374 mm x 84 mm x 47 mm
63 mm
5 mm
315 mm x 80 mm x 90 mm
Note
Manufacturing at different production locations may involve use of different size box.
(1)
Revision: 02-Nov-15
Document Number: 28766
6
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
DESCRIPTION
ASSEMBLY
Production is strictly controlled and follows an extensive
set of instructions established for reproducibility. A
homogeneous film of metal alloy is deposited on a high
grade ceramic body and conditioned to achieve the desired
temperature coefficient. Plated steel termination caps are
firmly pressed on the metallized rods. A special laser is used
to achieve the target value by smoothly cutting a helical
groove in the resistive layer without damaging the ceramics.
Connecting wires of electrolytic copper plated with 100 %
pure tin are welded to the termination caps. Alternative
termination wires available for e.g. welding (MBA/SMA0204
only). The resistor elements are covered by a light blue
protective coating designed for electrical, mechanical and
climatic protection. Four or five color code rings designate
the resistance value and tolerance in accordance with IEC
60062.
The result of the determined production is verified by an
extensive testing procedure performed on 100 % of the
individual resistors. Only accepted products are stuck
directly on the adhesive tapes in accordance with
IEC 60286-1 or for the radial versions in accordance to
IEC 60286-2.
The resistors are suitable for processing on automatic
insertion equipment and cutting and bending machines.
Excellent solderability is proven, even after extended
storage. They are suitable for automatic soldering using
wave or dipping.
The resistors are completely lead (Pb)-free, the pure tin
plating provides compatibility with lead (Pb)-free and
lead-containing soldering processes. The immunity of the
plating against tin whisker growth, in compliance with
IEC 60068-2-82, has been proven under extensive testing.
The encapsulant is resistant to cleaning solvent specified in
IEC 60115-1 (3). The suitability of conformal coatings, if
applied, shall be qualified by appropriate means to ensure
the long-term stability of the whole system.
All products comply with GADSL (1) and the IEC 62474 (2) list
of legal restrictions on hazardous substances. This includes
full compliance with the following directives:
• 2000/53/EC End of Vehicle Life Directive (ELV) and
Annex II (ELVII)
• 2011/65/EU Restriction of the use of Hazardous
Substances Directive (RoHS)
• 2012/19/EU Waste Electrical and Electrical Equipment
Directive (WEEE)
MATERIALS
Vishay acknowledges the following systems for the
regulation of hazardous substances:
• IEC 62474, Material Declaration for Products of and for the
Electrotechnical Industry, with the list of declarable
substances given therein (1)
• The Global Automotive Declarable Substance List
(GADSL) (2)
• The REACH regulation (1907/2006/EC) and the related list
of substances with very high concern (SVHC) (3) for its
supply chain
The products do not contain any of the banned substances
as per IEC 62474, GADSL, or the SVHC list, see
www.vishay.com/how/leadfree.
Hence the products fully comply with the following
directives:
• 2000/53/EC End-of-Life Vehicle Directive (ELV) and
Annex II (ELV II)
• 2011/65/EU Restriction of the Use of Hazardous
Substances
Directive
(RoHS)
with
amendment
2015/863/EU
• 2012/19/EU Waste Electrical and Electronic Equipment
Directive (WEEE)
Vishay pursues the elimination of conflict minerals from its
supply chain, see the Conflict Minerals Policy at
www.vishay.com/doc?49037.
APPROVALS
The resistors (CECC version) are approved within the
IECQ-CECC Quality Assessment System for Electronic
Components to the detail specification EN 140101-806
which refers to EN 60115-1 and EN 140100 and the variety
of environmental test procedures of the IEC 60068
series. Conformity is attested by the use of the CECC logo
( ) as the Mark of Conformity on the package label for the
CECC version.
Vishay
Beyschlag
has
achieved
“Approval
of
Manufacturer” in accordance with IEC QC 001002-3,
clause 2. The release certificate for “Technology Approval
Schedule” in accordance with CECC 240001 based on
IEC QC 001002-3, clause 6 is granted for the Vishay
Beyschlag manufacturing process.
RELATED PRODUCTS
For a correlated range of precision TCR and tolerance
specifications see the datasheet:
• “Precision
Thin
Film
Leaded
Resistors”,
www.vishay.com/doc?28767
For products approved to EN 140101-806, version E, with
established reliability and failure rate level E7 (Quality factor
πQ = 0.1), see the datasheet:
• “Established Reliability Thin Film Leaded Resistors”,
www.vishay.com/doc?28768
Notes
(1) Global Automotive Declarable Substance List, see www.gadsl.org
(2) CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European
trade organisation representing the information and communications technology and consumer electronics), see
www.digitaleurope.org/SearchResults.aspx?Search=eicta.
All products comply with the IEC 62474, Material Declaration for Products of and for the Electrotechnical Industry.
(3) Other cleaning solvents with aggressive chemicals should be evaluated in actual cleaning process for their suitability.
Revision: 02-Nov-15
Document Number: 28766
7
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
Power in %
FUNCTIONAL PERFORMANCE
100
Standard Mode
Power Mode
80
60
40
20
0
-55
0
50
100
70
125
155
180
Ambient Temperature in °C
Temperature Rise Tr
Derating
80
K
60
40
MBE/SMA 0414
MBB/SMA 0207
MBA/SMA 0204
20
0
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
W 1
Load P
Temperature Rise
Revision: 02-Nov-15
Rise of surface temperature
Document Number: 28766
8
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
Pulse Load Pmax.
www.vishay.com
Vishay Beyschlag
MBE/SMA 0414
MBB/SMA 0207
MBA/SMA 0204
100
W
10
1
0.1
10 µs
100 µs
1 ms
10 ms
100 ms
10 s
1s
Pulse Duration ti
Maximum pulse load, single pulse; for permissible resistance change equivalent to 8000 h operation.
Continuous Pulse Load Pmax.
Single Pulse
MBE/SMA 0414
MBB/SMA 0207
MBA/SMA 0204
100
W
10
1
0.1
10 µs
100 µs
1 ms
10 ms
100 ms
10 s
1s
Pulse Duration ti
Maximum pulse load, continuous pulses; for permissible resistance change equivalent to 8000 h operation.
Pulse Voltage U max.
Continuous Pulse
MBE/SMA 0414
MBB/SMA 0207
MBA/SMA 0204
1 kV
100 V
10 µs
100 µs
1 ms
10 ms
100 ms
1s
10 s
Pulse Duration ti
Maximum pulse voltage, single and continuous pulses; for permissible resistance change equivalent to 8000 h operation.
Pulse Voltage
Revision: 02-Nov-15
Document Number: 28766
9
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
Test Voltage
www.vishay.com
Vishay Beyschlag
10 kV
1 kV
100 V
MBE/SMA 0414
MBB/SMA 0207
MBA/SMA 0204
10 V
10 Ω
100 Ω
1 kΩ
10 kΩ
100 kΩ
1 MΩ
10 MΩ
Resistance Value R
Pulse load rating in accordance with IEC 60115-1, 4.27; 1.2 µs/50 µs; 5 pulses at 12 s intervals;
for permissible resistance change (0.5 % R + 0.05 Ω)
Test Voltage
1.2/50 Pulse
10 kV
1 kV
MBE/SMA 0414
MBB/SMA 0207
MBA/SMA 0204
100 V
10 V
10 Ω
100 Ω
1 kΩ
10 kΩ
100 kΩ
1 MΩ
10 MΩ
Resistance Value R
Pulse load rating in accordance with IEC 60115-1, 4.27; 10 µs/700 µs; 10 pulses at 1 minute intervals;
for permissible resistance change (0.5 % R + 0.05 Ω)
Current Noise A1
10/700 Pulse
1
µV/V
0.1
MBE/SMA 0414
MBB/SMA 0207
MBA/SMA 0204
0.01
100
1K
10K
100K
1M
Ω
10M
Resistance Value R
Current noise - A1 in accordance with IEC 60195
Revision: 02-Nov-15
Document Number: 28766
10
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
TESTS PROCEDURES AND REQUIREMENTS
All tests are carried out in accordance with the following
specifications:
• EN 60115-1, generic specification (includes tests)
• EN 140100, sectional specification (includes schedule for
qualification approval)
• EN 140101-806 (successor of CECC 40101-806), detail
specification (includes schedule for conformance
inspection)
The test and requirements table contains only the most
important tests. For the full test schedule refer to the
documents listed above.
The tests are carried out in accordance with IEC 60068-2-xx
test method and under standard atmospheric conditions in
accordance with IEC 60068-1, 5.3.
Climatic category LCT / UCT / 56 (rated temperature range:
lower category temperature, upper category temperature;
damp heat, steady state, test duration: 56 days) is valid.
Unless otherwise specified the following values apply:
• Temperature: 15 °C to 35 °C
• Relative humidity: 45 % to 75 %
• Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar).
For performing some of the tests, the components are
mounted on a test board in accordance with IEC 60115-1,
4.31.
In Test Procedures and Requirements table, only the tests
and requirements are listed with reference to the relevant
clauses of IEC 60115-1 and IEC 60068-2-xx test methods.
A short description of the test procedure is also given.
TEST PROCEDURES AND REQUIREMENTS
PROCEDURE
IEC
60115-1
CLAUSE
IEC
60068-2
TEST
METHOD
TEST
4.5
4.7
-
Resistance
Voltage proof
Temperature
coefficient
4.8
-
4.13
-
Short time
overload
4.16
21 (Ua1)
21 (Ub)
21 (Uc)
Robustness
of terminations
4.17
20 (Ta)
Solderability
4.18.2
20 (Tb)
Resistance to
soldering heat
4.19
14 (Na)
Rapid change
of temperature
4.22
6
4.23
4.23.2
2 (Ba)
4.23.3
30 (Db)
4.23.4
1 (Aa)
4.23.5
13 (M)
4.23.6
30 (Db)
4.23.7
Revision: 02-Nov-15
Vibration
Climatic
sequence:
Dry heat
Damp heat,
cyclic
Cold
Low air
pressure
Damp heat,
cyclic
DC load
Stability for product types:
MBA/SMA 0204
MBB/SMA 0207
MBE/SMA 0414
URMS = Uins; 60 s
At (20 / -55 / 20) °C
and (20 / 155 / 20) °C
Room temperature;
U = 2.5 x P 70 x R or
U = 2 x Umax.; 5 s
Tensile, bending,
and torsion
+235 °C; 2 s; solder bath
method; SnPb40
+245 °C; 3 s; solder bath
method; SnAg3Cu0.5
Unmounted components;
(260 ± 5) °C; (10 ± 1) s
30 min at -55 °C
30 min at 155 °C
5 cycles
MBA/SMA 0204: 500 cycles
MBB/SMA 0207: 200 cycles
MBE/SMA 0414: 100 cycles
10 sweep cycles per
direction; 10 Hz to 2000 Hz
1.5 mm or 200 m/s2
REQUIREMENTS PERMISSIBLE CHANGE
(ΔR max.)
STABILITY
STABILITY
STABILITY
CLASS 0.5
CLASS 1
CLASS 2
1 Ω to 332 kΩ
0.22 Ω to < 1 Ω
> 332 kΩ
1 Ω to 1 MΩ
0.22 Ω to < 1 Ω
> 1 MΩ
1 Ω to 2.4 MΩ
0.22 Ω to < 1 Ω
> 2.4 MΩ
± 5 % R; ± 1 % R; ± 0.5 % R
No flashover or breakdown
± 50 ppm/K; ± 25 ppm/K
± (0.1 % R + 0.01 Ω) ± (0.25 % R + 0.05 Ω)
no visible damage
no visible damage
± 0.5 % R
no visible damage
± (0.1 % R + 0.01 Ω) ± (0.25 % R + 0.05 Ω)
± 0.5 % R
Good tinning
(> 95 % covered, no visible damage)
± (0.1 % R + 0.01 Ω) ± (0.25 % R + 0.05 Ω)
no visible damage
no visible damage
± 0.5 % R
no visible damage
± (0.1 % R + 0.01 Ω) ± (0.25 % R + 0.05 Ω)
± 0.5 % R
± (0.5 % R + 0.05 Ω)
± (0.5 % R + 0.05 Ω)
± (0.1 % R + 0.01 Ω) ± (0.25 % R + 0.05 Ω)
155 °C; 16 h
55 °C; 24 h;
≥ 90 % to 100 % RH; 1 cycle
-55 °C; 2 h
8.5 kPa; 2 h;
15 °C to 35 °C
55 °C; 5 days;
± (0.5 % R + 0.05 Ω)
≥ 95 % to 100 % RH; 5 cycles no visible damage
apply rated power for 1 min
± (1 % R + 0.05 Ω)
no visible damage
± (0.5 % R + 0.05 Ω)
± 0.5 % R
±2%R
no visible damage
Document Number: 28766
11
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
TEST PROCEDURES AND REQUIREMENTS
PROCEDURE
IEC
60115-1
CLAUSE
4.24
IEC
60068-2
TEST
METHOD
TEST
78 (Cab)
Damp heat,
steady state
-
Endurance
at 70 °C:
power
operation mode
-
Endurance
at 70 °C:
standard
operation mode
-
Endurance
at 125 °C
and 155 °C
Stability for product types:
4.25.1
4.25.3
4.29
45 (XA)
Component
solvent
resistance
4.40
-
Electrostatic
discharge
(human body
model)
MBA/SMA 0204
MBB/SMA 0207
MBE/SMA 0414
(40 ± 2) °C; 56 days;
(93 ± 3) % RH
U = P 70 x R or
U = Umax.;
1.5 h on; 0.5 h off
70 °C; 1000 h
70 °C; 8000 h
U = P 70 x R or
U = Umax.;
1.5 h on; 0.5 h off
70 °C; 1000 h
70 °C; 8000 h
REQUIREMENTS PERMISSIBLE CHANGE
(ΔR max.)
STABILITY
STABILITY
STABILITY
CLASS 0.5
CLASS 1
CLASS 2
1 Ω to 332 kΩ
0.22 Ω to < 1 Ω
> 332 kΩ
1 Ω to 1 MΩ
0.22 Ω to < 1 Ω
> 1 MΩ
1 Ω to 2.4 MΩ
0.22 Ω to < 1 Ω
> 2.4 MΩ
± (0.5 % R + 0.05 Ω)
± (1 % R + 0.05 Ω)
±2%R
± (0.5 % R + 0.05 Ω) (1)
± (1 % R + 0.05 Ω) (2)
± 0.5 % R
±1%R
± (0.25 % R + 0.05 Ω) (3)
± (0.5 % R + 0.05 Ω) (4)
± 0.25 % R
± 0.5 % R
125 °C; 1000 h
± (0.25 % R + 0.05 Ω) ± (0.5 % R + 0.05 Ω)
±1%R
155 °C; 1000 h
± (0.5 % R + 0.05 Ω)
±2%R
Isopropyl alcohol (used in
industrial application)
+23 °C; toothbrush method
IEC 61340-3-1;
3 pos. + 3 neg.
MBA/SMA 0204: 2 kV
MBB/SMA 0207: 4 kV
MBE/SMA 0414: 6 kV
± (1 % R + 0.05 Ω)
Marking legible; no visible damage
± (0.5 % R + 0.05 Ω)
Notes
(1) ± (0.4 % R + 0.05 Ω) for MBE/SMA 0414
(2) ± (0.8 % R + 0.05 Ω) for MBE/SMA 0414
(3) ± (0.2 % R + 0.05 Ω) for MBE/SMA 0414
(4) ± (0.4 % R + 0.05 Ω) for MBE/SMA 0414
Revision: 02-Nov-15
Document Number: 28766
12
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
DIMENSIONS
D
d
L
I
M
DIMENSIONS - Leaded resistor types, mass and relevant physical dimensions
Lmax.
(mm)
Dmax.
(mm)
TYPE
dnom.
(mm)
lmin.
(mm)
Mmin.
(mm)
MASS
(mg)
MBA/SMA 0204
1.6
3.6
0.5
29.0
5.0
125
MBB/SMA 0207 (1)
2.5
6.5
0.6
28.0
10.0 (1)
220
15.0
700
MBE/SMA 0414
4.2
11.9
0.8
31.0
Note
(1) For 7.5 ≤ M < 10.0 mm, use version MBB/SMA 0207 ... L0 (welding joint not lacquered)
MBB/SMA 0207 WITH RADIAL TAPING
LEAD SPACING (UB = 2.5 mm), SIZE 0207
P
DIMENSIONS in millimeters
Insulated
C
3 max.
H1
F
H
L
Pitch of components
P
12.7 ± 1.0
Lead spacing
F
2.5 + 0.6 / - 0.1
Width of carrier tape
W
18.0 + 1.0 / - 0.5
Body to hole center
H
18.0 ± 2.0
Height for cutting (max.)
L
11
Height for bending
C
2.5 + 0 / - 0.5
Height for insertion (max.)
H1
32
P
12.7 ± 1.0
W
Direction of unreeling
LEAD SPACING (RB = 5.0 mm), SIZE 0207
DIMENSIONS in millimeters
P
Insulated
C
H
3 max.
H1
L
F
H0
W
Pitch of components
Lead spacing
F
5.0 + 0.6 / - 0.1
Width of carrier tape
W
18.0 + 1.0 / - 0.5
Body to hole center
H
18.0 ± 2.0
Lead crimp to hole center
H0
16.0 ± 0.5
Height for cutting (max.)
L
11
Height for bending
C
2.5 + 0 / - 0.5
Height for insertion (max.)
H1
32
Direction of unreeling
Revision: 02-Nov-15
Document Number: 28766
13
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
HISTORICAL 12NC INFORMATION
• The resistors had a 12-digit numeric code starting with
2312
Resistance Decade
RESISTANCE DECADE
LAST DIGIT
0.1 Ω to 0.999 Ω
7
1 Ω to 9.99 Ω
8
10 Ω to 99.9 Ω
9
100 Ω to 999 Ω
1
• The subsequent 4 digits indicated the resistor type,
specification and packaging; see the 12NC table
• The remaining 4 digits indicated the resistance value:
- the first 3 digits indicated the resistance value
- the last digit indicated the resistance decade in
accordance with resistance decade table
1 kΩ to 9.99 kΩ
2
10 kΩ to 99.9 kΩ
3
100 kΩ to 999 kΩ
4
1 MΩ to 9.99 MΩ
5
10 MΩ to 99.9 MΩ
6
Historical 12NC Example
The 12NC code of a MBA 0204 resistor, value 47.5 kΩ and
TCR 50 with ± 1 % tolerance, supplied on bandolier in a box
of 5000 units was: 2312 905 14753.
HISTORICAL 12NC - Resistor Type and Packaging
2312 ... .....
DESCRIPTION
AMMOPACK
TYPE
TCR
± 50 ppm/K
MBA 0204
± 25 ppm/K
Jumper
± 50 ppm/K
MBB 0207
± 25 ppm/K
Jumper
± 50 ppm/K
MBE 0414
± 25 ppm/K
Revision: 02-Nov-15
REEL
TOL.
C1 1000 units
CT 5000 units
R1 1000 units
R2 2500 units
RP 5000 units
±5%
900 3....
905 3....
700 3....
-
805 3....
805 1....
±1%
900 1....
905 1....
700 1....
-
± 0.5 %
900 5....
905 5....
700 5....
-
805 5....
±1%
901 1....
906 1....
701 1....
-
806 1....
± 0.5 %
901 5....
906 5....
701 5....
-
806 5....
-
900 90001
905 90001
700 90001
-
805 90001
±5%
910 3....
915 3....
710 3....
-
815 3....
±1%
910 1....
915 1....
710 1....
-
815 1....
± 0.5 %
910 5....
915 5....
710 5....
-
815 5....
816 1....
±1%
911 1....
916 1....
711 1....
-
± 0.5 %
911 5....
916 5....
711 5....
-
816 5....
-
910 90001
915 90001
710 90001
-
815 90001
±5%
920 3....
-
-
825 3....
-
±1%
920 1....
-
-
825 1....
-
± 0.5 %
920 5....
-
-
825 5....
-
±1%
921 1....
-
-
826 1....
-
± 0.5 %
921 5....
-
-
826 5....
-
Document Number: 28766
14
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000