OPTEK OPB420AZ Right angle sensor: led in tower, photosensor in base Datasheet

Slotted Optical Switch
OPB420AZ & OPB420BZ
Features:
• Non-contact switching
• Right Angle Sensor: LED in tower, photosensor in base
• Choice of output configuration
• Optical line can be broken in three axis
• 24” minimum, 26 AWG UL approved wire leads
Product Photo Here
Description:
The OPB420 series optical switch consists of an infrared emitting diode (LED) and a phototransistor. The LED is
mounted on the tower with the phototransistor mounted on the base of a right angle shape package. The L-Shape
or right angle package configuration allows for an opaque object to block the light beam from a multitude of
directions including the X-axis Y-axis and Z-axis. The optical center line between the emitter and photosensor is
at 45° from the mounting base of the device. The OPB420AZ utilizes a phototransistor with a current output
proportional to the input drive current of the LED. The OPB420BZ utilizes a phototransistor with a base-emitter
resistance (RBE) which provides protection from low level light conditions. The OPB420BZ is ideal for applications
that require an enhanced contrast ratio and immunity to background irradiance, such as detection of semitransparent media.
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for
more information.
Applications:
•
•
•
•
•
•
•
•
•
•
Non-contact interruptive object
sensing
Tray-out sensor
Low paper tray sensor
Corner sensor
Printers
Copying machines
Paper sorting equipment
Amusement gaming equipment
Door sensor
Optical Switch
RoHS
Part #
OPB420AZ
OPB420BZ
LED
Wavelength
880 nm
OPB420AZ
PhotoSensor
Phototransistor
RBE Phototransistor
OPB420BZ
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.1 11/08
Page 1 of 6
Slotted Optical Switch
OPB420AZ & OPB42BZ
Mechanical Package Information
Description
Wire Color
Anode
Red
Cathode
Black
Collector
White
Emitter
Green
Dimensions are in Inches [Millimeters]
Tolerances ±0.010” [0.25mm]
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.1
11/08
Page 2 of 6
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Slotted Optical Switch
OPB420AZ & OPB420BZ
Phototransistor Version
Absolute Maximum Ratings (TA=25°C unless otherwise noted)
Storage & Operating Temperature Range
-40° C to +85° C
Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron] (1)
260° C
Input Diode
Continuous Forward Current
50 mA
Peak Forward Current (1 μs pulse width, 300 pps)
1A
Reverse Voltage
2V
Power Dissipation (2)
100 mW
Output Phototransistor
Collector-Emitter Breakdown Voltage
OPB420AZ
OPB420BZ
30 V
24 V
Power Dissipation (2)
100 mW
Electrical Characteristics (TA = 25°C unless otherwise noted)
SYMBOL
PARAMETER
MIN
TYP
MAX
UNITS
TEST CONDITIONS
Input Diode (See OP240 or OP265 for additional information)
VF
Forward Voltage
1.2
-
1.7
V
IF = 20 mA
IR
Reverse Current
-
-
100
µA
VR = 2 V
Output Phototransistor (See OP505 or OP705 for additional information)
V(BR)CEO
Collector-Emitter Breakdown Voltage
OPB420AZ
OPB420BZ
30
24
-
-
V
IC = 1 mA
IC = 100 µA
V(BR)ECO
Emitter-Collector Breakdown Voltage
OPB420AZ
OPB420BZ
5.0
0.4
-
-
V
IE = 100 µA
Collector-Emitter Dark Current
-
-
100
nA
VCE = 10 V, IF = 0, EE = 0
Collector-Emitter Saturation Voltage
-
-
0.4
V
IC = 250 µA, IF = 20 mA
1.0
-
10.0
mA
VCE = 5.0 V, IF = 20 mA
-
-
450
µA
VCE = 5 V, IF = 1 mA (5)
ICEO
Combined
VCE(SAT)
IC(ON)
On-State Collector Current
IC(Off)
Off-State Collector Current—
OPB420BZ
Notes:
(1)
(2)
(3)
(4)
(5)
RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.
Derate linearly 1.67 mW/°C above 25 ° C..
Methanol or isopropanol are recommended as cleaning agents. Plastic housing is soluble in chlorinated hydrocarbons and ketones.
All parameters were tested using pulse technique.
Simulated optical path blocked with infrared semi-transparent object
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.1 11/08
Page 3 of 6
Slotted Optical Switch
OPB420AZ & OPB42BZ
Typical Output Current Vs Forward Current
250%
VCE = 5 VDC, TA = 25°C
Normalized to IF = 20 mA
225%
Typical Output Current Vs Forward Current
200%
20%
Normalized to IF = 20mA
and VCE = 5VDC at TA = 25°
Normalized Output Current - %
Normalized Output Current - %
18%
16%
14%
12%
10%
OPB420AZ - Phototransistor
8%
6%
OPB420BZ - RBEPhototransistor
4%
175%
150%
125%
100%
75%
Phototransistor
2%
50%
0%
0.0
1.0
2.0
3.0
4.0
5.0
25%
IF - Forward Current - mA
RBE Phototransistor
0%
0
5
10
15
20
25
30
35
IF - Forward Current -mA
40
45
50
Typical Output Current Vs Distance
(Z Axis Blocked)
100%
90%
VCE = 5 VDC
IF = 20 mA
Normalized Output Current - %
80%
Z-Flag Direction
70%
60%
50%
40%
30%
20%
10%
0%
0
0.02 0.04 0.06 0.08 0.1 0.12 0.14 0.16 0.18 0.2 0.22 0.24 0.26
Blocking Distance - Inches
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.1
11/08
Page 4 of 6
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Slotted Optical Switch
OPB420AZ & OPB420BZ
Typical Output Current Vs Distance (Y-Axis Blocked)
100%
90%
Y-Flag Direction
Normalized Output Current - %
80%
VCE = 5VDC
IF = 20 mA
70%
60%
Flag at
0.4"
Flag at
0.2"
Flag at
0.0"
50%
40%
30%
20%
10%
0%
0.00
0.10
0.20
0.30
0.40
0.50
0.60
Blocking Distance - Inches
Typical Output Current Vs Distance X-Axis Blocked
100%
90%
VCE = 5VDC
IF = 20mA
Normalized Output Current -%
80%
70%
X-Flag Direction
60%
Flag at
0.00
Flag at
0.15
Flag at
0.30
50%
40%
30%
20%
10%
0%
0.00
0.10
0.20
0.30
0.40
0.50
0.60
0.70
0.80
Blocking Distance - inches
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.1 11/08
Page 5 of 6
Slotted Optical Switch
OPB420AZ & OPB42BZ
Typical Collector Current vs Collector to Emitter Voltage
225%
Normalized to IF = 20mA and VCE = 5 VDC
IF=40mA
200%
IF=35mA
175%
Normalized Collector Current %
IF=30mA
150%
IF=25mA
125%
IF=20mA
100%
IF=15mA
75%
IF=10mA
50%
25%
IF=5mA
0%
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
VCE - Collector to Emitter Voltage - Volts
Typical Output Current vs Ambient Temperature
120%
100%
Normalized Output Current
IF = 5 mA
IF = 20 mA and 40
80%
Normalized for each IF current
at VCC = +5 VDC and TA = 20°C
60%
40%
20%
0%
-40
-30
-20
-10
0
10
20
30
40
50
60
70
80
Ambient Temperature (°C)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.1
11/08
Page 6 of 6
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Similar pages