Cynergy3 IWPTU-GP3K6-00 Industrial wireless pressure transducer Datasheet

IWPTU Series
Industrial Wireless Pressure Transducer
Pressure ranges from -15 to +5800 psi gauge
Up to 2500ft line-of-site range (depending on receiver)
Piezo-resistive thick film ceramic sensor with stainless steel body
Five year battery life at 10 second transmission update rate
Simple DIL switch pairing with the single or five channel receiver
Single or five channel receivers available
User-selectable transmission update rates
User-selectable 1-5V or 4-20mA receiver outputs
Receiver clean contacts provide process alarm functions
DESCRIPTION
The IWPTU Wireless Pressure Transducer is a cost effective replacement to a traditionally
wired pressure transducer that offers the advantages of a low-cost installation in
inaccessible and expensive installation environments.
TYPICAL APPLICATIONS INCLUDE:- Simple cable replacement installation –
dispense with expensive cable runs
- Environmental monitoring – pumping stations,
sewage plants, water treatment
- Facilities management – boiler rooms, plant
hydraulics, plant pneumatics
- Asset monitoring – tanks farms, process
plants, HVAC and building management
- Service Contract – temporary installation for
servicing and field trials
Transmitter Pressure Ranges
Nominal Pressure, Gauge, psi
Compound range
psi
Permissible Overpressure psi
Burst Pressure
psi
Transmitter Output
*Transmission Frequency
Transmit Power
System Channel
Antenna
*Compliant with EN 300 328, V1.8.1
Cynergy3 Components Ltd.
Ferndown Industrial Estate
7 Cobham Road
Wimborne, Dorset BH21 7PE
Telephone +44 (0) 1202 897969
Email:[email protected]
ISO9001 C E R T I F I E D
It is easily paired to the compatible IWR family of single- or five-channel wireless
receivers thus offering a “plug and play” solution to your pressure measurement
applications.
The instrument uses a piezo-resistive ceramic sensor mounted within a stainless steel
housing giving excellent media compatibility for the harshest of applications.
A line-of-sight range of up to 2500ft is possible depending on the wireless receiver used
(refer to datasheets IWR-1 & IWR-5 for further information).
Each device is temperature compensated, calibrated and supplied with a traceable
serial number and calibration certificate.
15
30
75
150
300
750
1500
-15 to 0 -15 to 30 -15 to 75 -15 to 1235 -15 to 285 -15 to 360
30
60
150
300
600
1500
3000
60
75
180
375
750
1800
3750
2.4 Ghz
18 dBm
User selectable via DIL switch
Integral 0dBi
3750
6000
6000
7500
9750
9750
System Performance
Accuracy (Non-Linearity & Hysteresis)
Setting Errors (offsets)
Instrument Power Source
Battery Type
Battery Life
Battery Shelf Life
<±0.25% / FS (BFSL)
Zero & Full Scale, <±0.5% / FS
User replaceable Lithium C cell
Five years at 10 second update
rate
10 years
www.cynergy3.com
IWPTU 2016
© 2016 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.
IWPTU Series
Industrial Wireless Pressure Transducer
Material Specifications
Pressure Housing
“O” ring seals
Diaphragm
Wireless Enclosure Material
Weight
**Installation position
303 Stainless Steel
Viton
Ceramic Al2O3 96%
Plastic
310g including battery
Any
Temperatures & Thermal Effects
Media Temperature
Ambient Temperature
Storage Temperature
Thermal Zero Shift
Thermal Span Shift
-20ºC to +135ºC
-20ºC to +80ºC
-20ºC to +80ºC
<±0.04% /FS/ºC
<±0.02% /ºC typical
Mechanical Stability
See user manual
Ordering Codes:Pressure Transducer
Spare battery
Single Channel Receiver
Five Channel Receiver
Five Channel Configuration Software
See table below
IBAT-1
IWR-1
IWR-5
IWR-Set
** Consult installation manual to ensure adequate signal path between transmitter and receiver
Receiver Output Signals
Outputs
Single Channel Receiver
Five Channel receiver
Alarm Output
***Transmission Update Rate
1-5V or 4-20mA per channel
IWR-1 (see data sheet)
IWR-5 (see data sheet)
5 Amp rated changeover contacts
1, 5, 10 and 30 seconds
*** Consult installation manual for set-up:
- single channel system is DIL switch configurable
- five channel system requires set-up using “IWR Set” user software
*Download user configuration software here: - www.cyneregy3.com/????????
Part Number
IWPTU-GP015-00
IWPTU-GP030-00
IWPTU-C0446-00
IWPTU-GP075-00
IWPTU-GP100-00
IWPTU-C0447-00
IWPTU-GP150-00
IWPTU-GP300-00
IWPTU-GP750-00
IWPTU-GP1K5-00
IWPTU-GP3K6-00
IWPTU-GP5K8-00
Pressure Rating Receiver Output
0-15 psi G
1-5Vdc or 4-20mA
0-30 psi G
1-5Vdc or 4-20mA
-14.5 to +150 psi G1-5Vdc or 4-20mA
0-75 psi G
1-5Vdc or 4-20mA
0-100 psi G
1-5Vdc or 4-20mA
-14.5 to +350 psi G1-5Vdc or 4-20mA
0-150 psi G
1-5Vdc or 4-20mA
0-300 psi G
1-5Vdc or 4-20mA
0-750 psi G
1-5Vdc or 4-20mA
0-1500 psi G
1-5Vdc or 4-20mA
0-3600 psi G
1-5Vdc or 4-20mA
0-5800 psi G
1-5Vdc or 4-20mA
Mechanical Dimensions
Cynergy3 Components Ltd.
7 Cobham Road
Ferndown Industrial Estate
Wimborne, Dorset BH21 7PE
Telephone +44 (0) 1202 897969
Email:[email protected]
60 nominal
Head rotatable
by 180°
1/4" NPT
ISO9001 C E R T I F I E D
© 2016 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.
Similar pages