DFE201210S-2R2M# “#” indicates a package specification code. < List of part numbers with package codes > DFE201210S-2R2M=P2 Shape L size 2.0 ±0.3mm W size 1.2 ±0.2mm T size 1.0 mm Size code in inch (mm) 0805 (2012) Notes Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20℃.) Rated current (Itemp) is specified when temperature of inductor the is raised 40℃ by DC current. (The ambient reference temperature is 20℃.) References Packaging Specifications code 1 of 2 =P2 φ180mm Embossed taping Minimum quantity 3000 (Typ.) 1.This datasheet is downloadedMass from the website of Murata Manufacturing Co., Ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued 1 piece without advance notice. Please check with our sales0.016g representatives or product engineers before ordering. 2.This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Specifications Inductance Inductance test frequency URL : https://www.murata.com/ 2.2µH ±20% 1MHz Last updated: 2018/05/16 Chart of characteristic (The charts below may show another part number which shares its characteristics.) Rated current (Isat) (Baseddata on Inductance change) 2100mA Inductance-Current characteristics (Typ.) Rated current (Itemp) (Based on Temperature rise) 1500mA Max. of DC resistance 0.155Ω Operating temperature range (Self-temperature rise is included) -40〜125℃ Class of magnetic shield Metal Alloy Absolute maximum voltage 20V DC Series DFE201210S Temperature rise characteristics (Typ.) 2 of 2 1.This datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2.This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Last updated: 2018/05/16