Online data sheet DL50-P2225 Dx50 MID RANGE DISTANCE SENSORS DL50-P2225 | Dx50 MID RANGE DISTANCE SENSORS A B C D E F Ordering information Type Part no. DL50-P2225 1048418 Other models and accessories www.sick.com/Dx50 Detailed technical data Performance H I J K L M N O P Q R S T Measuring range 200 mm ... 50,000 mm, on reflective tape "Diamond Grade" 1) Resolution 0.1 mm Repeatability 0.5 mm / 0.3 mm / 0.25 mm 2) 3) 4) Accuracy ± 3 mm 5) Response time 10 ms / 40 ms / 160 ms 3) 6) Output time 2.5 ms 7) 8) Light source Laser, red Laser class 1 (EN 60825-1) 9) Typ. light spot size (distance) 15 mm x 15 mm (10 m) Additional function Set moving average fast/medium/slow, switching mode: distance to object (DtO), teach-in, scaling and inversion of switching output, set hysteresis, multifunctional in- and output: laser off, external teach, switching output 2, inactive, Serial data output: continuous, on request, Set data transmission rate: 19,200, 38,400, 57,600, 115,200 bps, Unique measurement value, crosstalk safety, Set parity check: none; even; odd, switch-off display, reset to factory default, lock user interface Laser service life (MTTF at 25 °C) 100,000 h 1) 2) 3) 4) 5) 6) 7) 8) 9) 2 On reflective tape "Diamond Grade" Equivalent to 1 σ. Dependent on the averaging setting: fast/medium/slow. Typical value. 200 mm ... 4,000 mm: ≤ ± 5 mm. Lateral entry of the object into the measuring range. For baud rate 115,200 bps. Continuous change of distance in measuring range. Wavelength: 658 nm; max. output: 80 mW; pulse duration: 2.5 ns; duty cycle: 1/240. DISTANCE SENSORS | SICK Online data sheet | 2016-03-17 13:18:11 Subject to change without notice DL50-P2225 | Dx50 MID RANGE DISTANCE SENSORS Interfaces Switching output 2 x / 1 x PNP (100 mA) 1) 2) 3) Multifunctional input (MF) − / 1 x 3) 4) 5) Hysteresis 1 mm ... 1,000 mm Data interface RS-422 1) 2) 3) 4) 5) Output Q short-circuit protected. PNP: HIGH = VS - (< 2.5 V) / LOW = 0 V. Dependent on the set function MF: switching output 2 / laser off, external teach. Response time ≤ 60 ms. PNP: HIGH = VS / LOW = ≤ 2.5 V. Mechanics/electronics Supply voltage Vs DC 10 V ... 30 V 1) Ripple ≤ 5 Vpp 2) Power consumption ≤ 2.1 W 3) Initialization time ≤ 250 ms Warm-up time ≤ 15 min Housing material Housing zinc die cast (ZNAL4CU1) Acrylic glass (PMMA) Connection type Male connector, M12, 8-pin Indication LC display, 2 x LED Weight 200 g 1) 2) 3) Limit values, reverse-polarity protected, operation in short-circuit protected network: max. 8 A. May not fall short of or exceed VS tolerances. Without load. Ambient data Enclosure rating IP 65 Protection class III Ambient temperature Operation: –30 °C ... +65 °C Storage: –40 °C ... +75 °C Max. rel. humidity (not condensing) ≤ 95 % Typ. Ambient light immunity 40 klx Vibration resistance EN 60068-2-6 / EN 60068-2-64 Shock resistance EN 60068-2-27 2016-03-17 13:18:11 | Online data sheet Subject to change without notice DISTANCE SENSORS | SICK 3 DL50-P2225 | Dx50 MID RANGE DISTANCE SENSORS Dimensional drawing (Dimensions in mm (inch)) 36.1 (1.42) 34 47.4 (1.88) 56 (0 3.8 .1 5) 3 18 ) 3.5 (0.14) (0. 50.8 (2.0) (0 4.5 .1 8) 27.2 (1.07) 62.7 (2.47) 47.1 (1.85) 2 .5 Ø4 .4 ° 72.7 (2.86) 1 39.2 (1.54) 6.5 ° 57.7 (2.27) M12 x 1 7 H I J K L M N O P Q R S T 4.0 (0.16) 131 A B C D E F ① ② ③ ④ ⑤ ⑥ ⑦ Optical axis sender Optical axis receiver Fixing hole Reference surface = 0 mm Status indicator swichting output Q1 (orange) DT50/DT50 Hi/DL50: status indicator power on (green), DS50/DL50 Hi: status indicator switching output Q2 (orange) Operating keys and display Connection type Male connector M12, 8-pin Connection diagram brn 2 blu 7 wht 1 gra 5 pnk 6 grn 3 yel 4 red 8 L+ M Q1 TX– TX+ RX– RX+ Q2/MF 1 ① Multifunctional in- and output 4 DISTANCE SENSORS | SICK Online data sheet | 2016-03-17 13:18:11 Subject to change without notice DL50-P2225 | Dx50 MID RANGE DISTANCE SENSORS Recommended accessories Other models and accessories www.sick.com/Dx50 Brief description Type Part no. BEF-AH-DX50 2048397 DOL-1208-G02MAH1 6032448 PL240DG 1017910 Terminal and alignment brackets Alignment unit, steel, zinc coated, mounting hardware for the sensor included Plug connectors and cables Head A: female connector, M12, 8-pin, straight Head B: cable Cable: PUR, halogen-free, shielded, 2 m Reflectors Reflector plate, reflective tape "Diamond Grade", 330 mm x 330 mm, material base plate: aluminum, screw connection, Screw-on, 4 hole mounting 2016-03-17 13:18:11 | Online data sheet Subject to change without notice DISTANCE SENSORS | SICK 5 Online data sheet SICK at a glance SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applications. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and requirements. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK LifeTime Services provide support throughout the machine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” Worldwide presence: Contacts and other locations – www.sick.com SICK AG | Waldkirch | Germany | www.sick.com