MEDER electronic DIL Series Sealed DIL Version w/ up to 4.25 kVDC Breakdown Voltage Option DESCRIPTION Several pin out options are possible with the 14 pin DIL series. Suitable for telecommunication applications where breakdown voltages up to 4.25 kVDC and the EN60950 approval are required. FEATURES • EN60950 approved • 1 Form C available • High resistance available • Up to 4 Form A switches available • Magnetic shield available • 4.25 kVDC breakdown voltage available • High power switching available CHARACTERISTICS • Compatible with DIL socket • Coil resistance up to 11 kΩ • Diode option DIMENSIONS All dimensions in mm [inches] ORDER INFORMATION Part Number Example DIL12 - 1A81 - 10LHR 12 is the nominal voltage 1A is the contact form 81 is the switch model 10 is the pin out L is the option HR is the high resistance version OPTION RELAY NOMINAL CONTACT SWITCH SERIES VOLTAGE FORM MODEL DIL XX - XX XX - XX 66, 72, 75 13**, 15 81*, 88 13** PIN OUT ( ) VERSION WITH X 1A 05, 12, 24 2A OPTIONS VERSION MAGNETIC SHIELD XX HR***, L 66, 72, 75, 88 21 05, 12 1C 90 51** 05, 12, 24 2C 90 62, 63 L (M), D (Q), E (R)t, F (S)tt HR***, L L * The 81 swi tch i s not avai lable wi th a nomi nal voltage of 24 V. ** When HR i s selected, 24 V nomi nal voltage i s not avai lable. L t tt Not avai lable wi th pi n out 62. Not avai lable wi th pi n outs 62 and 63. *** 81 and 90 swi tch only. L = No Opti on. www.meder.com Germany # ++49-(0)7733-94870, USA # 800-870-5385 259 DIL Series MEDER electronic Sealed DIL Version w/ up to 4.25 kVDC Breakdown Voltage Option PIN OUT OPTIONS ( ) Versions with magnetic shield Please note: Any option can affect the coil resistance, the breakdown voltage or other electrical data. Please contact us. Special performance: The following special options are available on request: • • • • Low height versions available (5 and 8 mm) Other pinning layouts Other coil resistance values Other switches available www.meder.com 260 Germany # ++49-(0)7733-94870, USA # 800-870-5385 MEDER electronic DIL Series Sealed DIL Version w/ up to 4.25 kVDC Breakdown Voltage Option COIL DATA CONTACT FOR M SWITCH MODEL COIL VOLTAGE COIL RESISTANCE PULL-IN VOLTAGE DROP-OUT VOLTAGE NOMINAL COIL POWER VD C Ω VD C VD C mW All data at 20 0C * 66 72 75 1A 88 Hg wetted 81 66 72 75 2A 88 Hg wetted 1C 90 Nom. Max. Min. Typ. Max. Min. Max. Min. Max. Typ. 5 7.5 405 450 495 0.85 3.5 0.75 3.4 55 12 16 1620 1800 1980 1.9 8.4 1.8 8.3 80 24 30 4050 4500 4950 3.7 16.8 3.6 16.7 130 5 7.5 153 170 187 0.85 3.5 0.75 3.4 145 12 16 630 700 770 1.9 8.4 1.8 8.3 205 24 30 1530 1700 1870 3.7 16.8 3.6 16.7 340 5 7.5 2700 3000 3300 0.85 3.5 0.75 3.4 10 12 16 9000 10000 11000 1.9 8.4 1.8 8.3 115 5 7.5 180 200 220 0.85 3.5 0.75 3.4 125 12 16 612 680 748 1.9 8.4 1.8 8.3 210 24 30 1800 2000 2200 3.7 16.8 3.6 16.7 290 5 7.5 54 60 66 0.85 3.5 0.75 3.4 415 12 16 315 350 385 1.9 8.4 1.8 8.3 410 24 30 1215 1350 1485 3.7 16.8 3.6 16.7 425 5 7.5 180 200 220 0.85 3.5 0.75 3.4 125 12 16 900 1000 1100 1.9 8.4 1.8 8.3 145 24 30 2700 3000 3300 3.7 16.8 3.6 16.7 190 7.5 117 (145) 130 (150) 143 (165) 0.85 3.5 0.75 3.4 190 (165) 12 16 477 (612) 530 (680) 583 (748) 1.9 8.4 1.8 8.3 270 (210) 24 30 1800 2000 2200 3.7 16.8 3.6 16.7 290 5 2C * The pull-in / drop-out voltage and coil resistance will change at the rate of 0.4% per 0C. ( ) Values in parenthesis are for pin out 63. www.meder.com Germany # ++49-(0)7733-94870, USA # 800-870-5385 261 DIL Series MEDER electronic Sealed DIL Version w/ up to 4.25 kVDC Breakdown Voltage Option RELAY DATA All data at 20 0C Switch Model --> Contact For m --> Contact Ratings Conditions Switch 66 For m A Switch 72 For m A Switch 81 For m A Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units Switching Power Any DC combination of V & A not to exceed their individual max.'s Switching Voltage 10 20 5 W D C or peak A C 200 200 90 V Switching Current D C or peak A C 0.5 1.0 0.5 A Carry Current D C or peak A C 1.25 1.25 1.0 A Static Contact Resistance w/ 0.5V & 50mA 150 150 200 mΩ Dynamic Contact Resistance Measured w/ 0.5V & 50mA 1.5 ms after closure 200 mΩ Insulation Resistance (100 Volts applied) Across contacts Contact to coil 1 0 10 1 0 12 1 0 12 1 0 12 109 1 0 12 Ω Breakdown Voltage Across contacts Contact to coil 225 1.5 320 1.5* 100 1.5 VD C kV D C Operate Time, incl. Bounce Measured w/ 100% overdrive 200 200 0.5 Release Time Measured w/ no coil suppression Capacitance Across contacts Contact to coil 0.5 0.1 0.1 0.5 ms 0.1 ms 0.2 4.0 0.2 4.0 0.2 4.0 pF 1000 1000 100 106 Cycles Life Expectancies Switching 5 Volts@ 10mA DC only & <10 pF stray cap. For other load requirements please see our life test section located on page 151. Environmental Data Shock Resistance 1/2 sine wave duration 11ms 50 50 30 g Vibration Resistance From 10 - 2000 Hz 20 20 10 g Ambient Temperature 10 0C/ minute max. allowable -20 70 -20 70 -20 70 0 C Storage Temperature 10 0C/ minute max. allowable -25 85 -25 85 -25 85 0 C Soldering Temperature 5 sec. dwell 260 0 C 260 260 * 4.25 kVDC / 3.0 kVRMS for pin outs 13 and 15. www.meder.com 262 Germany # ++49-(0)7733-94870, USA # 800-870-5385 MEDER electronic DIL Series Sealed DIL Version w/ up to 4.25 kVDC Breakdown Voltage Option RELAY DATA All data at 20 0C Switch Model --> Contact For m --> Contact Ratings Conditions Switch 88 For m A / Hg wetted Switch 75 For m A Switch 90 For m C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units Switching Power Any DC combination of V & A not to exceed their individual max.'s Switching Voltage 10 35 3 W D C or peak A C 1000 1000 175 V Switching Current D C or peak A C 0.5 1.0 0.25 A Carry Current D C or peak A C 1.0 2.0 1.2 A Static Contact Resistance w/ 0.5V & 50mA 200 60 150 mΩ Dynamic Contact Resistance Measured w/ 0.5V & 50mA 1.5 ms after closure 250 mΩ Insulation Resistance (100 Volts applied) Across contacts Contact to coil 10 1 0 12 10 1 0 12 10 1 0 12 Ω Breakdown Voltage Across contacts Contact to coil 1500 1.5 1500 1.5* 200 1.5 VD C kV D C Operate Time, incl. Bounce Measured w/ 100% overdrive 0.5 2.5 0.7 ms Reset Time Measured w/ no coil suppression 0.1 2.0 1.5 ms Capacitance Across contacts Contact to coil 0.4 4.0 0.4 4.0 1.0 4.0 pF DC only & <10 pF stray cap. 500 1000 100 106 Cycles 200 10 200 10 9 Life Expectancies Switching 5 Volts@ 10mA For other load requirements please see our life test section located on page 151. Environmental Data Shock Resistance 1/2 sine wave duration 11ms 50 50 50 g Vibration Resistance From 10 - 2000 Hz 20 20 20 g Ambient Temperature 10 0C/ minute max. allowable -20 70 -20 55 -20 70 0 C Storage Temperature 10 0C/ minute max. allowable -25 85 -25 85 -25 85 0 C Soldering Temperature 5 sec. dwell 260 0 C 260 260 * 4.25 kVDC / 3.0 kVRMS for pin out 13 and 15. www.meder.com Germany # ++49-(0)7733-94870, USA # 800-870-5385 263