Conductive Polymer Tantalum Solid Capacitors Surface Mount Type Series : TPF Features ● Super low ESR (5 mΩ max.) capacitance (1000 μF max.) ● RoHS compliance, Halogen free ● Large Specifications Size code D2E D3L Category temperature range D4 –55 °C to +105 °C Rated voltage range 2.0 V.DC 2.5 V.DC to 10 V.DC 2.5 V.DC to 6.3 V.DC Category voltage range 2.0 V.DC 2.5 V.DC to 10 V.DC 2.5 V.DC to 6.3 V.DC Rated capacitance range 220 μF to 330 μF 150 μF to 680 μF 470 μF to 1000 μF Capacitance tolerance ±20 % (120 Hz / + 20 °C) Leakage current Please see the attached characteristics list Dissipation factor (tan d) Please see the attached characteristics list Surge voltage (V.DC) Rated voltage × 1.15 +105 °C, 2000 h rated voltage applied Capacitance change Within ±20 % of the initial value Endurance tan d < 1.5 times of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 500 h, No-applied voltage Within +50 %, −20 % of the initial value Capacitance change (2TPF220M6, 2TPF330M6, ETPF1000M6H (5H)) Within +40 %, −20 % of the initial value (Except for above model) Damp heat (Steady State) tan d < 1.5 times of the initial limit DC leakage current < 3 times of the initial limit Marking Dimensions (not to scale) L W R.Cap. code H Polarity marking(+) R. Voltage code Lot. No. S S W1 Unit : mm R. Voltage (V.DC) Code 2.0 d 2.5 e 4.0 g 6.3 j 10.0 A Size code L±0.3 D2E 7.3 D3L 7.3 D4 7.3 W±0.2 H±0.2 ✽1 S±0.2 4.3 1.8 1.3 4.3 2.8 1.3 4.3 3.8 1.3 W1±0.1 2.4 2.4 2.4 ✽ Externals of figure are the reference. ✽ 1 ±0.1 :D2E Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 Conductive Polymer Tantalum Solid Capacitors Characteristics list Rated Rated Category Category Rated Series voltage temp. voltage temp. capacitance (V.DC) (°C) (V.DC) (°C) (μF) 2 2.5 TPF 4 6.3 10 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 2.0 2.0 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 4.0 4.0 4.0 6.3 6.3 6.3 6.3 6.3 10.0 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 220 330 330 470 680 1000 330 470 680 220 330 470 150 Case size (mm) L W H 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 1.8 1.8 2.8 2.8 2.8 2.8 3.8 2.8 2.8 2.8 3.8 3.8 3.8 2.8 2.8 3.8 2.8 2.8 2.8 2.8 3.8 2.8 Specifications Size Ripple ✽1 ✽2 code current ESR tan d ✽3 (mΩ max.) (mAr.m.s.) 4700 6 0.10 D2E 4700 6 0.10 4400 7 0.10 4400 6 0.10 D3L 4400 7 0.10 4400 10 0.10 D4 6100 5 0.10 4400 6 0.10 D3L 4400 7 0.10 4400 10 0.10 6100 5 0.10 6100 5 0.10 D4 5600 6 0.10 4000 12 0.10 D3L 4400 10 0.10 D4 4400 10 0.10 6100 5 0.10 4600 9 0.10 D3L 4000 12 0.10 3900 9 0.10 D4 4400 10 0.10 D3L 3600 15 0.10 Standard LC ✽4 (μA) Part number 88.0 132.0 82.5 117.5 117.5 117.5 117.5 170.0 170.0 170.0 170.0 250.0 250.0 132.0 188.0 272.0 138.6 138.6 138.6 207.9 296.1 150.0 2TPF220M6 2TPF330M6 2R5TPF330M7L 2R5TPF470M6L 2R5TPF470M7L 2R5TPF470ML ETPF470M5H 2R5TPF680M6L 2R5TPF680M7L 2R5TPF680ML ETPF680M5H ETPF1000M5H ETPF1000M6H 4TPF330ML 4TPF470ML 4TPF680MAH 6TPF220M5L 6TPF220M9L 6TPF220ML 6TPF330M9L 6TPF470MAH 10TPF150ML Min. Packaging Q'ty (pcs) 3000 3000 2500 2500 2500 2500 2000 2500 2500 2500 2000 2000 2000 2500 2500 2000 2500 2500 2500 2500 2000 2500 ✽1 Ripple current (100 kHz/ +45 °C ), ✽2 ESR (100 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 5 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015