UTC MGBR10L40C Dual mos gated barrier rectifier Datasheet

UNISONIC TECHNOLOGIES CO., LTD
MGBR10L40C
Preliminary
DIODE
DUAL MOS GATED
BARRIER RECTIFIER

DESCRIPTION
The UTC MGBR10L40C is a dual mos gated barrier
rectifiers, it uses UTC’s advanced technology to provide
customers with low forward voltage drop and high switching
speed, etc.

FEATURES
* Low forward voltage drop
* High switching speed


SYMBOL
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
MGBR10L40CL-TA3-T
MGBR10L40CG-TA3-T
Note: Pin Assignment: A: Anode
K: Cathode

Package
TO-220
Pin Assignment
1
2
3
A
K
A
Packing
Tube
MARKING
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
1 of 3
QW-R204-056.b
MGBR10L40C

Preliminary
DIODE
ABSOLUTE MAXIMUM RATINGS (PER LEG) (TA=25°C unless otherwise specified)
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
PARAMETER
SYMBOL
RATINGS
UNIT
DC Blocking Voltage
VRM
40
V
Working Peak Reverse Voltage
VRWM
40
V
Peak Repetitive Reverse Voltage
VRRM
40
V
Average Rectified Forward Current
Per Leg
5
A
IO
(Rated VR-20KHz Square Wave) – 50%
Total
10
A
duty cycle
Non-Repetitive Peak Forward Surge Current 8.3ms Single
IFSM
120
A
Half Sine-Wave Superimposed on Rated Load
Peak Repetitive Reverse Surge Current (2μS-1kHz)
IRRM
2
A
Operating Junction Temperature
TJ
-65~+150
°C
Storage Temperature
TSTG
-65~+150
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.

THERMAL CHARACTERISTICS (PER LEG)
PARAMETER
SYMBOL
θJA
θJC
Junction to Ambient
Junction to Case

RATINGS
62.5
2
UNIT
°C/W
°C/W
ELECTRICAL CHARACTERISTICS (TA =25°C, unless otherwise specified.)
PARAMETER
Reverse Breakdown Voltage (Note 1)
SYMBOL
V(BR)R
TEST CONDITIONS
IR=0.50mA
IF=5A, TJ=25°C
Forward Voltage Drop
VFM
IF=5A, TJ=125°C
VR=40V, TJ=25°C
Leakage Current (Note 1)
IRM
VR=40V, TJ=125°C
Notes: 1. Short duration pulse test used to minimize self-heating effect.
2. Thermal resistance junction to case mounted on heatsink.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
40
TYP MAX UNIT
V
0.55
V
0.52
V
500 μA
50
mA
2 of 3
QW-R204-056.b
MGBR10L40C
Preliminary
DIODE
TYPICAL CHARACTERISTICS

Forward Derating Curve
Typical Forward Characteristics
Instantantaneous Forward Current (A)
Average Rectified Current (A)
16
14
12
10
8
6
4
2
0
0
25
50
75
100 125 150 175
100
125°C
10
25°C
1.0
IF Pulse
0.1 Width=300uS
0.4
0.2
0.6
0.8
1.0
Instantaneous Forward Voltage (V)
Case Temperature (°C)
Typical Reverse Characteristics
Instantaneous Reverse Current (A)
1E-1
1E-2
1E-3
1E-4
1E-5
1E-6
1E-7
VR=60V
25
50
75
100
125
150
Case Temperature (°C)
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 3
QW-R204-056.b
Similar pages