LPE-3325 Vishay Dale Surface Mount Transformers/Inductors, Gapped and Ungapped, Custom Configurations Available FEATURES • Compliant to RoHS Directive 2002/95/EC • Halogen-free according to IEC 61249-2-21 definition ELECTRICAL SPECIFICATIONS Inductance Range: 10 μH to 3900 μH, measured at 0.10 VRMS at 10 kHz without DC current, using an HP 4263A or 4284A impedance analyzer DC Resistance Range: 0.06 to 18.0 , measured at + 25 °C ± 5 °C Rated Current Range: 1.00 A to 0.06 A Dielectric Withstanding Voltage: 500 VRMS, 60 Hz, 5 s STANDARD ELECTRICAL SPECIFICATIONS GAPPED MODELS (B) UNGAPPED MODELS (A) SATURATING CURRENT IND. IND. SCHEMATIC DCR MAX. MAX. RATED DC CURRENT (A) (2) MODEL (μH) TOL. LETTER () (A) (1) LPE3325ER100NU 10 ± 30 % A 0.06 1.01 N/A LPE3325ER150NU 15 ± 30 % A 0.08 0.91 N/A LPE3325ER220NU 22 ± 30 % A 0.09 0.83 N/A LPE3325ER330NU 33 ± 30 % A 0.11 0.75 N/A LPE3325ER470NU 47 ± 30 % A 0.14 0.69 N/A LPE3325ER680NU 68 ± 30 % A 0.16 0.63 N/A LPE3325ER101NU 100 ± 30 % A 0.20 0.57 N/A LPE3325ER151NU 150 ± 30 % A 0.76 0.29 N/A LPE3325ER221NU 220 ± 30 % A 0.92 0.26 N/A LPE3325ER331NU 330 ± 30 % A 1.13 0.24 N/A LPE3325ER471NU 470 ± 30 % A 1.35 0.22 N/A LPE3325ER681NU 680 ± 30 % A 1.62 0.20 N/A LPE3325ER102NU 1000 ± 30 % A 1.97 0.18 N/A LPE3325ER152NU 1500 ± 30 % A 2.41 0.16 N/A LPE3325ER222NU 2200 ± 30 % A 3.00 0.15 N/A LPE3325ER332NU 3300 ± 30 % A 5.96 0.10 N/A LPE3325ER392NU 3900 ± 30 % A 7.00 0.10 N/A LPE3325ER100MG 10 ± 20 % A 0.22 0.54 1.480 LPE3325ER150MG 15 ± 20 % A 0.27 0.48 1.240 LPE3325ER220MG 22 ± 20 % A 0.42 0.39 1.050 LPE3325ER330MG 33 ± 20 % A 0.65 0.31 0.872 LPE3325ER470MG 47 ± 20 % A 0.97 0.26 0.740 LPE3325ER680MG 68 ± 20 % A 1.45 0.21 0.622 LPE3325ER101MG 100 ± 20 % A 2.22 0.17 0.518 LPE3325ER151MG 150 ± 20 % A 3.55 0.13 0.426 LPE3325ER221MG 220 ± 20 % A 4.31 0.12 0.354 LPE3325ER331MG 330 ± 20 % A 6.72 0.10 0.290 LPE3325ER471MG 470 ± 20 % A 9.83 0.08 0.244 LPE3325ER681MG 680 ± 20 % A 14.8 0.07 0.204 LPE3325ER102MG 1000 ± 20 % A 18.0 0.06 0.169 Notes (1) DC current that will create a maximum temperature rise of 30 °C when applied at + 25 °C ambient. (2) DC current that will typically reduce the initial inductance by 20 %. • UNGAPPED MODELS: Highest possible inductance with the lowest DCR and highest Q capability. Beneficial in filter, impedance matching and line coupling devices. GAPPED MODELS: Capable of handling large amounts of DC current, tighter inductance tolerance with better temperature stability than ungapped models. Beneficial in DC/DC converters or other circuits carrying DC currents or requiring inductance stability over a temperature range. DESCRIPTION LPE 3325 1000 μH ± 30 % A ER e2 MODEL SIZE INDUCTANCE VALUE INDUCTANCE TOLERANCE CORE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER L P E PRODUCT FAMILY 3 3 2 SIZE 5 E R PACKAGE CODE 1 0 2 INDUCTANCE VALUE N U TOL. CORE Note • Series is also available with SnPb terminations by using package code RY for tape and reel (in place of ER) or SM for bulk (in place of EB). Document Number: 34063 Revision: 24-Feb-11 For technical questions, contact: [email protected] www.vishay.com 1 LPE-3325 Surface Mount Transformers/Inductors, Gapped and Ungapped, Custom Configurations Available Vishay Dale DIMENSIONS in inches [millimeters] Pad Layout SCHEMATIC (top view) 0.056 [1.42] Pad Dimensions Typical, 6 places Schematic A 0.073 [1.85] 0.042 [1.07] Typical two places 0.232 [5.89] 0.288 [7.32] Reference Only Dimensional 4 Outline 0.256 [6.50] 3 5 2 6 1 Note • Schematic A for both gapped and ungapped LPE series 3 ENVIRONMENTAL PERFORMANCE Max. 1 6 4 Clip Opening Opposite Pin 1 0.205 [5.21] Max. 0.323 [8.20] Max. 0.268 [6.81] 0.028 [0.71] 0.073 [1.85] Typ. TEST CONDITIONS Thermal Cycling Withstands - 55 °C to + 125 °C Operating Temperature - 55 °C to + 125 °C (1) High Humidity 85 % Soldering Heat Tested to + 230 °C Mechanical Shock Per MIL-STD-202, method 213 (100G) Vibration Per MIL-STD-202, method 204 (20G) Solderability Per industry standards Note (1) Must be checked in end use application PART MARKING - Vishay Dale 0.028 [0.71] Footprint Diagram - Date code Notes • Pad layout guidelines per MIL-STD-275E (printed wiring for electronic equipment). • Tolerances: xx ± 0.01" [± 0.25 mm]; xxx ± 0.005" [± 0.12 mm]. - Marking code (suffix of model #) - Pin 1 indicator PACKAGING STANDARDS: All embossed carrier tape packaging will be accomplished in compliance with latest revision of EIA-481 “Taping of Surface Mount Components for Automatic Placement”. TAPE SPECIFICATIONS: Carrier Tape Type: Conductive Cover Tape Type: Anti-static Cover Tape Adhesion to Carrier: 40 g ± 30 g REEL SPECIFICATIONS: Diameter (flange): 13" [330.2 mm] Maximum Width (over flanges): 1.197" [30.4 mm] MODEL TAPE WIDTH COMPONENT PITCH UNITS PER 13" REEL LPE-3325 24 mm 12 mm 1000 Tape and Reel Orientation Pin 1 Indicator Cover Tape Carrier Tape Label Area USER DIRECTION OF FEED Embossed Cavity Note • Top view shown with cover tape removed www.vishay.com 2 For technical questions, contact: [email protected] Document Number: 34063 Revision: 24-Feb-11 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000