LTM3-01 Ultra-Miniature Illuminated Pushbutton Switches With Connector Socket RoHS Compliant ■ ■Features 1VA max.（50mA max.48VDC max） Rating 1. Metal contact for sharp tactile feel. 2. Snap-in panel mount. 3. Connector socket for easy installation. Initial Contact Resistance 100m Ω max. （1.5mA 200μVAC at 1.96N） Dielectric Strength 250VAC 1 minute Insulation Resistance 100MΩ min （100VDC） Electrical Life 300,000 operations Contact Bounce 10 msec. max.（initial value） Travel 0.25 mm Operating Force 1.37±0.39N （at peak force） Operating Temperature Range −25〜＋70℃ Storage Temperature Range −40〜＋70℃ ■Part Numbering 3 − 01 − L2 R − Z LT M G Series Contact plating Metal contacts Registration No. Structure None Silver plated G Gold plated L2 L5 L8 Red Green Yellow LED Color C R M Y Clear Red clear Green clear Yellow clear ■Applicable Connector ■ Simbol Button color LED color Forward （ V VF ） Forward Current （IF） nom. max. Reverse Voltage （VR） L2 Red 30mA 2.0V 2.5V DC5V L5 Green 25mA 2.2V 2.5V DC5V L8 Yellow 30mA 2.1V 2.5V DC5V ZHR-2（Housing） by J.S.T. MFG CO.,LTD. ■Panel Cut-Out Dimensions LTM3 ■Table of Part Numbers ■ Plastic Bag Illuminated LED color Button color Red Green Yellow Switches Contact plating Silver 0 20 Gold Clear ★LTM3-01-L2C-Z ★LTMG3-01-L2C-Z Red ★LTM3-01-L2R-Z ★LTMG3-01-L2R-Z Clear ★LTM3-01-L5C-Z ★LTMG3-01-L5C-Z Green ★LTM3-01-L5M-Z ★LTMG3-01-L5M-Z Clear ★LTM3-01-L8C-Z ★LTMG3-01-L8C-Z Yellow ★LTM3-01-L8Y-Z ★LTMG3-01-L8Y-Z 15 0 Switching function Part No. LED circuit connector (Black) LTM3-01-L ■■ -Z LTMG3-01-L ■■ -Z OFF （ON） Connecting terminals ̶ （1）−（2） LED circuit （ON） ：Momentary Switch circuit connector (Ivory) ■ Handling Precautions ⑴ Cleaning The frame of the switch is made of polyamide resin and the color button is made of ABS resin. Use alcohol or water to wipe the main body and make sure the cleaning solvent does not infiltrate the switch. Do not use organic solvent as this may cause product defect. ⑶ Pushbutton Strength Do not press down the button with force exceeding 9.8 N. Bottom of the switch may pop out. ⑵ Panel Cutout When cutting out the panel, press through the panel from the front side. Also make sure to mount the switch from the front side of the panel. This will help the mount spring on both sides of the switch latch on to the edge of the hole. ★：Made to order products. （ON） ：Momentary ▲：Inquiry products.