M3 Series 5x7 mm, 3.3 Volt, HCMOS/TTL, Surface Mount Oscillator THIS PRODUCT IS NOT RECOMMENDED FOR NEW DESIGNS. PLEASE REFER TO THE M2 PRODUCT SERIES. • • • AT-strip crystal in a miniature ceramic surface mount package TTL and HCMOS compatible Tri-state output is optional DENOTES PIN 1 Tri-state Control Logic Pin 1 high or floating: clock signal output. Pin 1 low: output disabled to high impedance. NOTE: A capacitor of value 0.01 µF or greater between Vdd and Ground is recommended. MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. Revision: 03-02-07 MtronPTI Lead Free Solder Profile MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.