Ceramic Disc Capacitors NCD Series Class II/III GENERAL PURPOSE, HI-K (DIELECTRIC CONSTANT Class II/III) TYPE FEATURES • WIDE SELECTION OF TEMPERATURE CHARACTERISTICS • HIGH INSULATION RESISTANCE *See Part Number System for Details • EXCELLENT HIGH FREQUENCY CHARACTERISTICS • ECONOMICALLY PRICED • AVAILABLE WITH FORMED LEADS AND ON TAPE FOR AUTOMATIC ..INSERTION SPECIFICATIONS Temperature Characteristics Operating Temperature Range Capacitance Range Standard Tolerance Capacitance Change Over Temperature Range Dissipation Factor Insulation Resistance Working Voltage Range Dielectric Withstanding Voltage (Test Voltage) Cap. Change Load Life Test @ 85°C D.F. (max.) 1,000 Hours I.R. (min.) Test Conditions Y5F Y5P Z5U Z5V -30°C ~ +85°C -30°C ~ +85°C +10°C ~ +85°C +10°C ~ +85°C 100pF ~ 0.01μF ±10% (K) ±7.5% 2.5%* 100pF ~ 0.022μF 0.001μF ~ 0.01μF 0.001μF ~ 0.1μF ±10% (K) ±20% (M) +80%/-20% (Z) ±10% -55% ~ +22 -82% ~ +22% 2.5%* 5% Minimum 10,000 Megohms 50Vdc ~ 1KVdc 5% 2.5 Times Rated Voltage For Not Less Than 1 Second, 50mA Maximum ±10% 4% ±10% ±20% ±30% 4% 7.5% 7.5% 1,000 Megohms 1KHz, 1.0V ±02Vrms 1KHz, 0.5V ± 0.1Vrms * Special low dissipation factor (1.0% max.) Y5F and Y5P dielectrics are also available. Contact NIC for availability. ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com 1 Ceramic Disc Capacitors NCD 103 M 50 Z5U NCD Series Class II/III J .100LS TR F RoHS compliant Optional Packaging TR = Taped and Reel TB = Tape and Box (Ammo) Optional Lead Space (LS) and/or Lead Length (LL) in inches Optional Lead Style C = Cut Lead D = Inside Kink (Short Leads) E = Outward Kink (Short Leads) J = Inside Kink (Long Leads) K = Outward Kink (Long Leads) Temperature Coefficient Working Voltage DC Body Diameter 5 ~ 11 Standard Bulk 6.35 ± 0.8 >12 6.35 ± 0.8 Lead Spacing (mm) - S Standard Optional Bulk T&R mm (inches) 5.0 ± 0.8 5.0 ± 0.8 (0.200LS) 7.5 ± 0.8 (0.295LS) 5.0 ± 0.8 10.0 ± 0.8 (0.395LS) LEAD DIAMETER 0.6MM IS STANDARD Tolerance Code C = ± 0.25pF K = ± 10% D = ± 0.5pF M = ± 20% J = ± 5% Z = + 80% / - 20% Capacitance code, expressed in pfd, First two digits are significant, third digit is no. of zeros. “R” indicates decimal for under 10pfd. Series Optional T&R mm (inches) 2.5 ± 0.8 (0.100LS) 7.5 ± 0.8 (0.295LS) 10.0 ± 0.8 (0.395LS) BODY THICKNESS 2 ~ 4MM DEPENDENT ON CV Low Voltage Standard 100Vdc & Below 500Vdc & Up 2 max. 3 max. 23 min. 23 min. STANDARD PRODUCTS AND MAXIMUM DIAMETER (mm) BY T.C. AND VOLTAGE Y5F/Y5P* Cap. (pF/μF) 100~470pF 560 680 750 820 0.001μF 0.0015 0.0022 0.0027 0.0033 0.0047 0.0056 0.0068 0.0082 0.01 0.015 0.022 0.033 0.047 0.068 0.1 50 100 6 6 6 6 6 6 6 6 7 7 8 9 9 10 12 14 - 500 6 6 6 6 6 7 8 9 10 10 12 14 14 16 16 21 - Z5U Working Voltage (Vdc) 50 50 1K 500 1K 100 100 6 6 7 7 7 7 6 6 6 8 6 6 7 10 6 7 7 6 12 6 7 8 6 14 6 7 9 6 14 6 8 10 6 16 6 9 10 6 16 7 9 12 6 18 7 10 12 6 20 7 10 12 6 9 14 16 7 10 16 18 8 8 18 22 7 8 21 24 7 8/9 24 8 8/9 26 8/9 S S Z5V 500 1K 6 6 6 6 7 8 8 8 9 9 10 14 16 16 16 17 6 6 6 7 8 8 9 10 10 10 12 16 18 21 - *.0047μF AND ABOVE NOT AVAILABLE IN Y5F, PLEASE USE Y5P. NIC RESERVES THE RIGHT TO REQUEST MINIMUM QUANTITIES ON CERTAIN VALUES. K Style J Style 5 max. 5 max. 1.5+0.2 1.5+0.2 23 min. 23 min. S S (BULK AND TAPED STYLES) D Style E Style 5 max. 1.5+0.2 4.7 + 1 5 max. 1.5+0.2 S 4.7 + 1 S (BULK ONLY) ® 2 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com Ceramic Disc Capacitors Taping Specifications DIMENSIONS (mm) Straight Leads <12mm diameter (a slight lead flare may be present) Straight Leads >12 ~ 23mm diameter (a slight lead flare may be present) P P2 P P2 D D P1 Δh H1 S H L P1 H1 S H L W W d P0 D P1 P P2 D S H1 P1 H H0 L D Crimped Leads >12 ~ 23mm diameter Inward (J) & Outward (K) are available Crimped Leads <12mm diameter Inward (J) & Outward (K) are available P2 d P0 P D S H1 H H0 L W W d P0 Symbol D max. d Dφ P < 12 0.6 >12 ~ 23 0.6 or 0.8* 25.4 +0.06 -0.05 ±1.0 Value < 12 Tolerance >12 ~ 23 P0 12.7 12.7 d P0 P1 5.1 3.85 3.18 t P2 S 6.35 2.5 5.0 6.35 8.95 7.5 H Applies to Parts with 20.0 Crimped Leads 12.7 7.7 H0 ±0.7 ±1.0 ±1.5 ±1.3 +0.8 -0.2 +1.5 -1.0 H1 Dφ W L t Δh 4.0 18.0 11.0 max. 0.6 0.0 ±0.2 ±0.5 --- ±0.3 ±2.0 32.25 max. 16.0 H max. + D max. ±0.5 --- 9.5 ±0.2 Dφ *Lead diameter dependent on capacitor diameter. Contact NIC for details ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com 3 Ceramic Disc Capacitors Taping Specifications AMMO PACK REEL H H ≤ 372 (14.64") L ≤ 377 (14.84") W ≤ 55 (2.16") B W L W D Acceptable to standard radial type cartridge. D< = 354 (13.93") > B = 21 (.83") but < 30 (1.18") = W< = 55 (2.16") Acceptable to standard radial type cartridge with a few extra accessories. PART NUMBER SUFFIX FOR OPTIONAL TAPE & REEL OR TAPE & BOX PACKAGING Tape & Reel Straight Lead Options TRF = Tape & Reel with 5mm lead-space TR.100LSF = Tape & Reel with 2.0mm lead-space TR.250LSF = Tape & Reel with 6.35mm lead-space TR.300LSF = Tape & Reel with 7.5mm lead-space TR.375LSF = Tape & Reel with 9.5mm lead-space Tape & Reel Crimped Lead Options (J = Inward Crimp, K = Outward Crimp) JTRF or KTRF = Tape & Reel with 5mm lead-space JTR.250LSF or KTR.250LSF = Tape & Reel with 6.35mm lead-space JTR.300LSF or KTR.300LSF = Tape & Reel with 7.5mm lead-space JTR.375LSF or KTR.375LSF = Tape & Reel with 9.5mm lead-space Tape & Box Straight Lead Options TBF = Tape & Reel with 5mm lead-space TB.100LSF = Tape & Reel with 2.0mm lead-space TB.250LSF = Tape & Reel with 6.35mm lead-space TB.300LSF = Tape & Reel with 7.5mm lead-space TB.375LSF = Tape & Reel with 9.5mm lead-space Tape & Box Crimped Lead Options (J = Inward Crimp, K = Outward Crimp) JTBF or KTBF = Tape & Reel with 5mm lead-space JTB.250LSF or KTBR.250LSF = Tape & Reel with 6.35mm lead-space JTB.300LSF or KTB.300LSF = Tape & Reel with 7.5mm lead-space JTB.375LSF or KTB.375LSF = Tape & Reel with 9.5mm lead-space Notes: 1. The above lead-space options may not be available in all part diameters. Contact NIC for details. 2. Inward "J style" and outward "K style" may not be available in all part diameters and voltages. Contact NIC for details. ® 4 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com