AZ699 SENSITIVE SUBMINIATURE RELAY FEATURES • • • • • • • • • • Extremely small (5mm) 6 Amp switching capability High sensitivity, 83 mW pickup Dielectric strength 4000 Vrms contact to coil Coils up to 48 VDC Epoxy sealed Clearance greater than 6 mm Creepage greater than 8 mm UL, CUR file E43203 VDE file 40000296 CONTACTS GENERAL DATA Arrangement SPST (1 Form A) SPDT (1 Form C) Ratings Resistive load: Max. switched power: 150 W or 1500 VA Max. switched current: 6 A Max. switched voltage: 300 VDC* or 400 VAC Life Expectancy Mechanical Electrical Minimum operations 1 X 107 operations 1 X 105 at 5 A, 250 VAC Operate Time (typical) 5 ms at nominal coil voltage Release Time (typical) 3 ms at nominal coil voltage (with no coil suppression) * Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Rated Load UL, CUR 6 A at 250 VAC resistive VDE 6 A at 250 VAC resistive Dielectric Strength 1000 Vrms between open contacts (at sea level for 1 min.) 4000 Vrms contact to coil 6000 V surge, contact to coil Insulation Resistance 100 megohms min. at 20°C, 500 VDC, 50% RH Material Silver tin oxide, gold plating available Dropout Greater than 5% of nominal coil voltage Resistance < 100 milliohms initially (AgSnO2) < 30 milliohms initially (AgSnO2, gold plated) Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 85°C (158°F) -40°C (-40°F) to 105°C (221°F) Vibration COIL Power 5 g at 10–500 Hz Shock 10 g Enclosure P.B.T. polyester 94V-0 At Pickup Voltage (typical) 83 mW Terminals Tinned copper alloy, P.C. Max. Continuous Dissipation 0.9 W at 20°C (68°F) ambient Max. Solder Temp. 260°C (500°F) Max. Solder Time 5 seconds Temperature Rise 20°C (36°F) at nominal coil voltage Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 6 grams Packing unit in pcs 20 per plastic tube / 1000 per carton box Temperature Max. 105°C (221°F) NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Minimum permissible contact load: AgSnO2 contact: 100 mA at 12 VDC AgSnO2 contact with gold plating: 10 mA at 5 VDC 4. Specifications subject to change without notice. ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2004-08-11 AZ699 RELAY ORDERING DATA COIL SPECIFICATIONS Nominal Coil VDC 5 ORDER NUMBER* Must Operate VDC 3.5 Max. Continuous VDC 11.2 Coil Resistance Ôhm ± 10% 147 AgSnO2 Contact AZ699–1C–5DE AgSnO2 with Gold Plated Contact AZ699–1C–5DEA 12 8.4 26.8 848 AZ699–1C–12DE AZ699–1C–12DEA 24 16.8 53.7 3,390 AZ699–1C–24DE AZ699–1C–24DEA 48 33.6 100.0 10,600 (±15%) AZ699–1C–48DE AZ699–1C–48DEA *Substitute “1A” for “1C” to indicate 1 Form A contacts. Add suffix “H” at the end of order number for horizontal mounting. MECHANICAL DATA PC BOARD LAYOUT 1.102 [28.0] .197 [5.0] .466 [11.34] .148 [3.75] .591 [15.0] .197 [5.0] .075 [1.9] 2 x ø .039 [ø 1.0] 5 x .138 [3.5] 2 x .018 [0.45] 5 x .018 [0.45] 3 x .039 [1.0] .047 [1.2] Horizontal Mount Note: Mounting hole diameters and center to center dimensions are the same for both vertical and horizontal mounting version Vertical Mount 1.102 [28.0] .050 [1.26] .610 [15.5] .591 [15.0] WIRING DIAGRAM .197 [5.0] Form A 1 2 2X .018 [0.45] .602 [15.3] 3 x ø .051 [ø 1.3] Vertical Mount 5 x .118 [3.0] .075 [1.9] .197 [5.0] .020 [0.5] 3 x .039 [1.0] 1 2 4 Form A 4 5 5 5 x .018 [0.45] Form C Form C 1 2 1 2 3 4 3 4 5 5 Horizontal Mount Vertical Mount Horizontal Mount Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2004-08-11