Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: [email protected] Web: http://www.frontierusa.com 6A FAST RECOVERY PLASTIC RECTIFIER FR60-005 THRU FR60-10 FEATURES z FAST RECOVERY TIMES z DIFFUSED JUNCTION z LOW COST z UL 94V-0 FLAME RETARDANT EPOXY MOLDING COMPOUND z HIGH SURGE CURRENT CAPABILITY 1.0(25.4) MIN .052(1.3) .048(1.2) .360(9.1) .340(8.6) MECHANICAL DATA z CASE: TRANSFER MOLDED, P6, DIMENSIONS IN INCHES AND (MILLIMETERS) z LEADS: SOLDERABLE PER MIL-STD-202,METHOD 208 z POLARITY: CATHODE INDICATED BY COLOR BAND z WEIGHT: 2.1 GRAMS .360(9.1) .340(8.6) 1.0(25.4) MIN MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20% RATINGS MAXIMUM RECURRENT PEAK REVERSE VOLTAGE MAXIMUM RMS VOLTAGE MAXIMUM DC BLOCKING VOLTAGE MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT 0.375”(9.5mm) LEAD LENGTH AT TA=55°C PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF SINE-WAVE SUPERIMPOSED ON RATED LOAD TYPICAL JUNCTION CAPACITANCE (NOTE 1) SYMBOL FR60-005 FR60-01 FR60-02 FR60-04 FR60-06 FR60-08 FR60-10 UNITS VRRM VRMS VDC 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 V V V IO 6.0 A IFSM 300 A CJ 100 PF TYPICAL THERMAL RESISTANCE (NOTE 2) Rθja 10 ℃/W STORAGE TEMPERATURE RANGE TSTG -55 TO + 150 ℃ OPERATING TEMPERATURE RANGE TOP -55 TO + 150 ℃ ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED) CHARACTERISTICS SYMBOL FR60-005 FR60-01 FR60-02 FR60-04 FR60-06 FR60-08 FR60-10 UNITS MAXIMUM FORWARD VOLTAGE AT IO DC VF 1.3 V MAXIMUM REVERSE CURRENT AT 25℃ MAXIMUM REVERSE CURRENT AT 100℃ IR 10 μA IR 100 μA MAXIMUM REVERSE RECOVERY TIME (NOTE3) TRR 150 NOTE: 1. MEASURED AT 1 MHZ AND APPLIED REVERSE VOLTAGE 0F 4.0 VOLTS 2. BOTH LEADS ATTACHED TO HEAT SINK 70x70x1t(mm) COPPER PLATE AT LEAD LENGTH 5mm 3. REVERSE RECOVERY TEST CONDITIONS: IF=0.5A, IR=1.0A, IRR=0.25A FR60-005 THRU FR60-10 250 Page: 1 500 nS RATINGS AND CHARACTERISTIC CURVE FR60-005 THRU FR60-10 FIG. 1-TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC 50Ω NO INDUCTIVE Trr 10Ω NO INDUCTIVE +0.5A (-) D.U.T. PULSE GENERATOR ( NOTE 2 ) (+) 25 Vdc (approx) 1Ω NON INDUCTIVE (-) OSCILLOSCOPE ( NOTE 1 ) 0 -0.25A (+) -1.0A 1cm NOTE: 1. RISE TIME=7ns MAX. INPUT IMPEDANCE=1 MOhms 22PF 2. RISE TIME =10ns MAX. SOURCE IMPEDANCE=50 OHMS SET TIME BASE FOR 10/20 ns/cm Fig. 3-MAXIMUM FORWARD SURGE NUMBER OF CYCLES 6.0 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 4.0 2.0 0 0 20 40 60 80 100 120 140 160 180 200 PEAK FORWARD SURGE CURRENT AMPERES Io-AVERAGE RECTIFIED CURRENT (A) Fig. 2-MAXIMUM CURRENT DERATING CURVE 300 8.3 ms Single Half Sine Wave (JEDEC Method) 200 100 1 TA-AMBIENT TEMPERATURE (OC) FIG. 5-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 100 Tj=100oC 1 Tj=50oC 0.1 Tj=25oC 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, % FR60-005 THRU FR60-10 INSTANTANEOUS FORWARD CURRENT AMPERES INSTANTANEOUS REVERSE CURRENT, MICROAMPERES FIG. 4-TYPICAL REVERSE CHARACTERISTICS 10 50 NO OF CYCLES AT 60 HZ 10 Tj=25oC PULSE WIDTH =300us 1% DUTY CYCLE 1 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE, VOLTS Page: 2 100