ASB APL0100-RT Pll synthesizer module Datasheet

plerowTM APL0100-R/T
PLL Synthesizer Module
· 5dBm Output Level at 100 MHz
The plerowTM PLL synthesizer module was
designed for use in wireless and wireline
systems in a wide range of frequency from
50 MHz to 6 GHz. ASB’s PLL provides exceptionally low spurious and phase noise
performance with fast locking time and low
current consumption. All products are available in a surface-mount type package.
· 2nd Harmonic: < -20dBc
· Spurious Level: < -65dBc
o
u
pl
er
· Current Consumption: < 40mA
C
o
u
pl
er
Description
C
Features
Specifications
Parameter
Unit
Frequency Range
MHz
Output Power
dBm
Supply Voltage
Min.
Typical
Max.
100
3
5
7
Website: www.asb.co.kr
E-mail: [email protected]
Tel: (82) 42-528-7225
Fax: (82) 42-528-7222
V
5
Current Consumption
mA
28
40
2nd Harmonics
dBc
-25
-20
Spurious Level
dBc
-70
-65
Reference Frequency
MHz
13
Reference Input Level
dBm
Phase Noise (C / N)
0
@ 1 kHz
@ 10 kHz
dBc/Hz
@ 100 kHz
Output Impedance

Operating Temp. Range
C
Package Type & Size
mm
More Information
2
ASB Inc., 4th Fl. Venture Town
Bldg., 367-17 Goijeong-Dong,
Seo-Gu, Daejeon 302-716, Korea
5
-88
-82
-108
-103
-120
-115
50
-30
25
80
SMT, 19.0W19.0L5.8H
1) Measurement conditions are as follows: T = 25C, VCC = 5 V, Freq. = 1955MHz, 50 ohm system.
2) Frequency stability of internal ref. TCXO is +/- 2.5 ppm (max.) over the operating temperature range.
1/2
www.asb.co.kr
June 2010
plerowTM APL0100-R/T
PLL Synthesizer Module
Outline Drawing
Copyright 2006-2017 ASB Inc. All rights reserved. Datasheet subject to change without notice. ASB
assumes no responsibility for any errors which may appear in this datasheet. No part of the datasheet
may be copied or reproduced in any form or by any means without the prior written consent of ASB.
2/2
www.asb.co.kr
June 2010