ORing IES-A1080 Industrial c1d2/atex 8-port unmanaged ethernet switch Datasheet

Industrial Ethernet Switch C1D2 DIN-Rail Unmanaged Ethernet Switch
v1.0 / Dec, 2013
IES-A1080/A1062 Series
IES-A1080
IES-A1062 Series
Industrial C1D2/ATEX 8-port unmanaged Ethernet switch
Features
Industrial Ethernet Switch
1
▪ C1D2 and ATEX compliant for harsh industrial environments application
▪ IES-A1080 provide 8x10/100Base-T(X) ports
▪ IES-A1062GT provide 6x10/100Base-T(X) and 2x10/100/1000Base-T(X)
ports
▪ IES-A1062FX series provide 6x10/100Base-T(X) and 2x100Base-FX fiber
ports
▪ IES-A1062GF series provide 6x10/100Base-T(X) and 2x1000Base-X fiber
ports
▪ Triple redundant DC power inputs of terminal block and power jack
▪ Support auto-negotiation and auto-MDI/MDI-X
▪ Support store and forward transmission
▪ Support flow control
▪ Rigid IP-30 aluminum housing design
▪ DIN-Rail and wall mounting enabled
E331061
Introduction
IES-A1080/A1062 series are unmanaged Ethernet switches with 6x10/100Base-T(X) and 2x100Base-FX, 10/100/1000Base-T(X), 1000Base-SX or
1000Base-LX ports which is specifically designed for the C1D2/ATEX certified with hazardous locations requirement. IES-A1080/A1062 series support
redundant power input and surge protection. The wide operating temperature range from -40 to 70°C and C1D2/ATEX certified can satisfy most of harsh or
hazardous locations operating environments.
Practical Operation
IES-A1080/A1062 series can be used in connecting several Ethernet devices like Ethernet I/O, IP-Camera or other Ethernet switches. In addition, there
are three different power inputs to enhance its reliability, two supplied by terminal block, and one by power jack to avoid interruption caused by power down.
When the primary DC power input fails, the backup power input will take over immediately to guarantee a non-stop operation.
Optic Fiber
IP Camera
IP Camera
Control Center
Oil & Gas Application
Oil Well Pumper
Connections of Ethernet devices
1-298
w w w.oring - net wo rk in g.co m
Industrial Ethernet Switch C1D2 DIN-Rail Unmanaged Ethernet Switch
v1.0 / Dec, 2013
ORing's switches are intelligent switches. Different from other traditional redundant switches, ORing provides a set of Windows utility (Open-Vision)
for user to manage and monitor all of industrial Ethernet switches on the industrial network.
Industrial
Ethernet Switch
Open-Vision
Industrial
Media Converter
Industrial
Device Server
Topology View
Industrial Wireless
Access Point
Monitoring and Configuration interface
Industrial Cellular
VPN Router
Dimensions
Industrial
M2M Gateway
IES-A1080
IES-A1062GT
IES-A1062GF
IES-A1062FX
Accessories
Network
Management Software
(Unit=mm)
D esign ed for R u gged E xcellence
1-299
Industrial Ethernet Switch C1D2 DIN-Rail Unmanaged Ethernet Switch
v1.0 / Dec, 2013
Specifications
ORing Switch Model
IES-A1062FX-MMIES -A1062GF-MMIES -A1062FX-SS-SC
IES -1062GF-SS-SC
SC
SC
IES-A1080
IES -A1062GT
10/100Base-T(X) Ports
in RJ45 Auto MDI/MDIX
8
6
6
6
6
6
10/100/1000Base-T(X) Ports
in RJ45 Auto MDI/MDIX
-
2
-
-
-
-
Fiber Ports Number
-
-
2
2
2
2
Fiber Ports Standard
-
-
100Base-FX
100Base-FX
1000Base-SX
1000Base-LX
Fiber Mode
-
-
Multi-mode
Single-mode
Multi-mode
Single-mode
9/125 µm
62.5/125 µm
50/125 µm
9/125 µm
Physical Ports
Industrial Ethernet Switch
1
Fiber Ports
Specifications
Fiber Diameter (µm)
-
-
62.5/125 µm
50/125 µm
Fiber Optical
Connector
-
-
SC
SC
SC
SC
Typical Distance (km)
-
-
2 km
30 km
0.55 km
10 km
Wavelength (nm)
-
-
1310 nm
1310 nm
850 nm
1310 nm
-
-
-14 dBm
-8 dBm
-4 dBm
-3 dBm
-
-
-23.5 dBm
-15 dBm
-9.5 dBm
-9.5 dBm
-
-
0 dBm
0 dBm
0 dBm
-3 dBm
-
-
-31 dBm
-34 dBm
-18 dBm
-20 dBm
-
-
7.5 dB
19 dB
8.5 dB
10.5 dB
6 Watts
6 Watts
685 g
685 g
Max. Output Optical
Power (dBm)
Min. Output Optical
Power (dBm)
Max. Input Optical
Power
(Saturation)
Min. Input Optical
Power
(Sensitivity)
Link Budget (dB)
Technology
MAC Table
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.3z for 1000Base-X
IEEE 802.3x for Flow control
8192 MAC addresses
Processing
Store-and-Forward
Ethernet Standards
LED Indicators
Power Indicator
Green : Power LED x 3
Fault Indicator
Amber : Indicates PWR1 or PWR2 failure occurred
10/100Base-FX RJ45 Port Indicator
10/100/1000Base-T(X) /
Fiber Port Indicator
Green for port Link/Act. Amber for Duplex/Collision
Green for port Link/Act. Amber for Link
Power
Power Consumption (Typ.)
Triple DC inputs :
Dual 12~48VDC on 7-pin terminal block
One 12~48VDC on power jack (power jack cannot use in hazardous location application)
4 Watts
7 Watts
8 Watts
8 Watts
Overload Current Protection
Present
Reverse Polarity Protection
Present on terminal block
Redundant Input Power
Physical Characteristics
Enclosure
IP-30
Dimensions (W x D x H)
52(W) x 106.1(D) x 144.3(H) mm (2.05x4.18x5.68 inch.)
Weight (g)
1-300
w w w.oring - net wo rk in g.co m
666 g
677 g
680 g
680 g
Industrial Ethernet Switch C1D2 DIN-Rail Unmanaged Ethernet Switch
v1.0 / Dec, 2013
Storage Temperature
-40 to 85°C (-40 to 185°F)
Operating Temperature
-40 to 70°C (-40 to 158°F)
Operating Humidity
5% to 95% Non-condensing
Industrial
Ethernet Switch
Environmental
Regulatory Approvals
FCC Part 15, CISPR (EN55022) class A
EMS
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock
IEC60068-2-27
Free Fall
IEC60068-2-32
Vibration
IEC60068-2-6
Safety
EN60950, UL508 (E331061), UL/cUL Class 1 Division 2 Group A/B/C/D, ATEX Class 1 Zone 2
Warranty
5 years
Industrial
Device Server
Ordering Information
I E S -A 1 A A B CC - DD - E E
Option
10/100Base-T(X)
Port Number
- 08: 8 ports
- 06: 6 ports
- GT: 10/100/1000Base-T(X)
- FX: 100Base-FX
- GF: 1000Base-X
Fiber Optical Mode
- MM: Multi-mode
- SS: Single-mode
Fiber Optical Connector
- SC: SC connector
Description
IES-A1080
Industrial C1D2/ATEX 8-port slim type unmanaged Ethernet switch with 8x10/100Base-T(X)
IES-A1062GT
Industrial C1D2/ATEX 8-port unmanaged Ethernet switch with 6x10/100Base-T(X) and 2x10/100/1000Base-T(X)
IES-A1062FX-MM-SC
Industrial C1D2/ATEX 8-port unmanaged Ethernet switch with 6x10/100Base-T(X) and 2x100Base-FX, multi-mode,
2Km/1310nm, SC connector
IES-A1062FX-SS-SC
Industrial C1D2/ATEX 8-port unmanaged Ethernet switch with 6x10/100Base-T(X) and 2x100Base-FX, single-mode,
30Km/1310nm, SC connector
IES-A1062GF-MM-SC
Industrial C1D2/ATEX 8-port unmanaged Ethernet switch with 6x10/100Base-T(X) and 2x1000Base-SX, multi-mode,
550m/850nm,SC connector
IES-A1062GF-SS-SC
Industrial C1D2/ATEX 8-port unmanaged Ethernet switch with 6x10/100Base-T(X) and 2x1000Base-LX, single-mode,
10Km/1310nm, SC connector
Optional Accessories
‧DR-45 series, 45W DIN-Rail power supply
‧DR-75 series, 75W DIN-Rail power supply
‧DR-120 series, 120W DIN-Rail power supply
‧PAA-121000, 12VDC/1000mA 12W Power Adapter with universal 100 to 240VAC input, US plug
‧PAE-121000, 12VDC/1000mA 12W Power Adapter with universal 100 to 240VAC input, EU plug
Accessories
Packing List
‧IES-A1080 / A1062 series
‧DIN-Rail Kit
‧Wall-mount Kit
‧Quick Installation Guide
Industrial
M2M Gateway
Available
Model
- 0: 0 port
- 2: 2 ports
Additional Port Type
Industrial Cellular
VPN Router
Model Name
Additional Port
Number
Industrial Wireless
Access Point
Code Definition
Industrial
Media Converter
EMI
Network
Management Software
D esign ed for R u gged E xcellence
1-301
Similar pages