Hirose FX15SC-51S-05SH 1mm pitch cable-to-board connectors supporting lvds signal Datasheet

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
1mm Pitch Cable-to-Board Connectors supporting LVDS signal
FX15 Series
Space saving, Equal length transmission lines
Patent
pending
Termination side: 0.5 mm pitch, 1-row construction
Mating side: 1 mm pitch, staggered 2-row construction
Contacts consolidated into 1 row for equal length transmission lines
Fig.1
■Features
1. Space saving
Self-alignment of ±1.5 mm
Large guide post
Reduction in space is achieved by designing the
contacts in 2-row staggered 1 mm pitch on the mating
side and on a single row 0.5 mm pitch on the termination
side (Fig. 1).
1.5mm
1.5mm
2. Equal length transmission lines
Contact configuration creates equal length transmission
lines preventing deterioration of LVDS signal within the
connector (Fig.1).
Fig.2
3. Different types
Availability of types with or without metal shields allows
flexibility of applications and cost reduction.
Side latch -locks
4. Self alignment and self-guiding
Built-in guide posts allow secure self-alignment within
±1.5 mm (Fig.2).
5. Secure and complete mating / unmating
Side latch-locks assure and confirm complete and
secure mating of plugs to receptacles while permitting
ease of disconnection (Fig. 3).
6. Enhanced shielding effectiveness
Availability of version with enlarged metal shields
(preventing intrusion or emission of the electromagnetic
interference) further protects the integrity of LVDS signal
(FX15S series, Fig.4)
With metal shields
(FX15 and FX15S Series)
Without metal shields
(FX15M Series)
Fig.3
High Shielding Effectiveness
0
Emission Noise Level (dBm)
7. RoHS compliant
All components and materials comply with the
reqirements of EU Directive 2002/95/EC.
■Applications
FPD-TV, FPD panels and other applications requiring
secure and reliable connection and transmission signal
integrity.
Without metal
-10
-20
-30
-40
-50
Fig.4
With metal
0.1 0.2
0.3
0.5
1
1.5
2
3
Frequency (GHz)
B273
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS
products
have been discontinued,
will be discontinued soon.
Please check the
products status
on thesignal
Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15
Series●1mm
Pitch or
Cable-to-Board
Connectors
supporting
LVDS
■Product Specifications
0.5A
100V AC
Current rating
Voltage rating
Ratings
Item
1. Contact resistance
2. Insulation resistance
3. Withstanding voltage
4. Insertion-Extraction force
5. Durability
(mating/un-mating)
6. Vibration
7. Shock
8. Humidity
9. Temperature cycle
10. Salt spray
Operating temperature range
Storage temperature range
-55ç to +80ç (Note 1)
-10ç to +60ç (Note 2)
Specification
60 m ohms max. (Note 3)
500 M ohms min.
No flashover or insulation breakdown.
0.2N min., 30N max.
Conditions
1 mA
100V DC
300V AC/one minute
With corresponding connector
Contact resistance: 80 m ohms max.(Note 3)
50 cycles
No electrical discontinuity of 1 µs or more.
No electrical discontinuity of 1 µs or more.
Contact resistance: 80 m ohms max.
No damage, cracks, or parts dislocation.(Note 3)
Contact resistance: 80 m ohms max. (Note 3)
Insulation resistance: 500 M ohms min.
Contact resistance: 80 m ohms max. (Note 3)
No corrosions
Frequency: 10 to 55 Hz, single amplitude of 0.76mm, 2 hours, 3 axis
Acceleration of 490m/s2, 11ms durations, sine half-wave waveform, 3 cycles, 3axis.
96 hours at 40ç, RH 90% to 95%
Temperature : -55ç → +15ç to +35ç → +85ç → +15ç to +35ç
Time
: 30 → 5 → 30 → 5 (Minutes) 5 cycles
5% water solution for 48 hours.
Note 1: Includes temperature rise caused by current flow.
Note 2: The term “storage” refers to products stored for long period of time prior to mounting and use. Operating temperature range
and humidity range covers non-conducting condition of installed connectors in storage, shipment or during transportation.
Note 3: Includes wire conductor resistance (12mm long).
Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and
specifications for a specific part number shown.
■Materials and Finishes
●Receptacle
Insulator
Component
Material
Polyamide
Contact
Phosphor bronze
FX15S : Nickel silver
FX15SC : Stainless steel
Phosphor bronze
Metal shields (with shields)
Metal fittings (without shields)
Finish
Color: Black
Contact area: Gold plated
Termination area: Tin plated
FX15S : --------------FX15SC : Tin plated
Selective gold flash plated
Remarks
UL94V-0
-------------------------------------------
●Plug
Insulator
Component
Material
Polyamide
Contact
Phosphor bronze
Metal shields (with shields)
Metal latch-locks (with shields)
Metal shields, metal latch-looks
(micro-coaxial cable)
---------------
Nickel silver
Stainless steel
Finish
Color: Black
Contact area: Gold plated
Termination area: Tin plated
-----------------------------
Stainless steel
Nickel plated
---------------
■Ordering information
1 Series Name
2 Configuration
●Receptacle
FX15 S - 31 S - 0.5 SH
1
2
3
4
5
6
3 Number of contacts
4 Connector type
●Plug
FX15 S - 31 P - C
1
2
3
4
5 Contact pitch
6 Housing configuration
7
7 Termination
●Crimp contact
FX15 - 3032 PCF B
1
2
8
9
10
8 Applicable conductor
9 Packaging
10 Plating (contact area)
B274
Remarks
UL94V-0
-----------------------------
: FX15
Blank : With shields (or crimp contact)
15S : With shields – enhanced shielding
15SC : With shields – enhanced shielding
(PCB mounting pattern : VESA standard)
15M : Without shields
P
S
: Male contact
: Female contact
: 0.5 mm
SH
: Right angle
SV
: Straight
C
: Crimp
0.5SD : Micro-coaxial cable
GND : Separate ground plate
2830 : AWG 28 to 30
3032 : AWG 30 to 32
PCF : Reel/ plug contact
B
: Gold plated
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the productsFX15
status on
the Hirose websitePitch
RoHS search
at www.hirose-connectors.com,
or contact
your Hirose
sales representative.
Series●1mm
Cable-to-Board
Connectors
supporting
LVDS
signal
■FX15 Series – Mating Diagram
Crimp contact
Plugs
Receptacles
With shields-standard
(FX15-31P-C)
Vertical, with shields
(FX15-31S-0.5SV)
B
Crimp contact
(FX15-3032-PCFB)
Without shields
(FX15M-P-C)
Right angle, with shields
–enhanced shielding
(FX15S-S-0.5SH)
B
With shields – enhanced shielding
(FX15S-P-C)
Right angle, without shields
(FX15M-S-0.5SH)
B
Crimp contact
(FX15-2830-PCFB)
With shields – enhanced shielding
AWG#28 to 30
(FX15SW-31P-C)
With shields – enhanced shielding
PCB mouting pattern : VESA standard
(FX15SC-S-0.5SH)
28
Ground plate
(FX15S-P-GND)
Micro-coaxial cable
(FX15S-P-0.5SD)
With shields – enhanced shielding
PCB mouting pattern : VESA standard
(FX15SC-S-0.5SV)
A
Ragarding the availability of the positions, contact your nearest Hirose representative.
B275
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS
products
have been discontinued,
will be discontinued soon.
Please check the
products status
on thesignal
Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15
Series●1mm
Pitch or
Cable-to-Board
Connectors
supporting
LVDS
■Plugs
●With shields (FX15-31P-C)
(27)
24.6±0.3
22.57±0.15
2.7±0.1
18.3±0.3
3.7±0.3
(13.45)
9.4±0.3
Polarizing mark
indicator
14±0.15
P=1±0.1
No.2
P=1±0.1
15±0.15
No.1
Part number
CL No.
Number of contacts
RoHS
FX15-31P-C
CL575-2101-2
31
YES
No.30
No.31
Note 1: Packaged in trays.
Note 2: Dimensions in parenthesis ( ) are reference dimensions.
●With shields, enhanced shielding (FX15S-**P-C)
(A)
B±0.3
C±0.15
4±0.3
2.7±0.1
(13.45)
9.4±0.3
Polarizing mark
indicator
3.7±0.3
D±0.3
E±0.15
P=1±0.1
No.2
P=1±0.1
F±0.15
No.1
No.n
Part number
CL No.
Number of contacts
A
B
C
D
E
F
FX15S-31P-C
CL575-2106-6
31
27
24.6
22.6
18.3
14
15
FX15S-41P-C
CL575-2107-9
41
32
29.6
27.6
23.3
19
20
FX15S-51P-C
CL575-2103-8
51
37
34.6
32.6
28.3
24
25
Note 1: Packaged in trays.
Note 2: Dimensions in parenthesis ( ) are reference dimensions.
B276
No.n-1
RoHS
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the productsFX15
status on
the Hirose websitePitch
RoHS search
at www.hirose-connectors.com,
or contact
your Hirose
sales representative.
Series●1mm
Cable-to-Board
Connectors
supporting
LVDS
signal
●With shields – enhanced shielding
AWG#28 to 30 (FX15SW-31P-C)
(27)
24.6±0.3
22.57±0.15
Polarizing mark
indicator
4±0.3
2.7±0.1
(13.45)
9.4±0.3
B
28
18.3±0.3
No.2
14±0.15
P=1±0.1
3.7±0.3
No.30
A
Part number
CL No.
Number of contacts
RoHS
FX15SW-31P-C
CL575-2113-1
31
YES
P=1±0.1
15±0.15
No.1
No.31
Note 1: Packaged in trays.
Note 2: Dimensions in parenthesis ( ) are reference dimensions.
●Without shields (FX15M-**P-C)
(A)
B±0.3
(13.6)
(13)
9.55±0.3
Polarizing mark
indicator
4.2±0.3
C±0.3
(D)
No.2
No.1
E±0.15
P=1±0.1
P=1±0.1
F±0.15
No.n-1
No.n
Part number
CL No.
Number of contacts
A
B
C
D
E
F
G
FX15M-21P-C
CL575-2109-4
21
24.8
20.5
17.6
13.7
FX15M-31P-C
CL575-2108-1
31
29.8
25.5
22.6
18.7
25.8
9
10
30.8
14
15
RoHS
YES
Note 1: Sold in package containing 100 pieces. Order by package.
Note 2: Dimensions in parenthesis ( ) are reference dimensions.
B277
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS
products
have been discontinued,
will be discontinued soon.
Please check the
products status
on thesignal
Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15
Series●1mm
Pitch or
Cable-to-Board
Connectors
supporting
LVDS
■Plug crimp contacts
Part number
CL No.
FX15-2830PCFB
CL575-2002-0
FX15-3032PCFB
CL575-2003-3
Packaging
Quantity
Finish
RoHS
Reel
20,000 pieces per reel
Gold plated
YES
●Applicable cable (Tin plated solid soft strands)
FX15-2830PCFB
AWG #30 (7/0.1 mm)
UL No.
0.72±0.1
Ø0.56 to 0.72mm
1571
AWG #30 (7/0.1 mm)
AWG #32 (7/0.08 mm)
(7)
FX15-3032PCFB
Applicable wire size
(Stranded wire conductor)
Jacket diameter
Ø0.5 to 0.6mm
UL No.
1516, 1571 (Note)
1571
●Wire strip length: 1.1 to 1.8 mm
t=0.15±0.05
Note: When using other than the recommended wire, contact
your nearest Hirose representative.
●Tools
Item
Applicator
Press unit
Product number
CL No.
Applicable crimp contact
AP105-FX15-2830
901-4036-0
FX15-2830PCFB
AP105-FX15-3032
901-4033-1
FX15-3032PCFB
CM-105
901-0005-4
–––––––––
Note: Consult HRS representative when using applicator.
B278
0.35±0.1
1517
0.9±0.15
AWG #28 (7/0.127 mm)
Jacket diameter
2±0.15
(Stranded wire conductor)
0.5±0.15
Applicable wire size
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the productsFX15
status on
the Hirose websitePitch
RoHS search
at www.hirose-connectors.com,
or contact
your Hirose
sales representative.
Series●1mm
Cable-to-Board
Connectors
supporting
LVDS
signal
●Plug – Micro-coaxial cable (FX15SC-**P-0.5SD)
No.1
No.n
No.2
No.n-1
(A)
B±0.3
C±0.15
Polarizing mark
indicator
2.7±0.15
(13)
8.75±0.3
A
No.1
P=0.5±0.1
D±0.15
Part number
CL No.
Number of contacts
A
B
C
D
FX15S-41P-0.5SD
CL575-2110-3
41
31.9
29.6
27.57
20
FX15S-51P-0.5SD
CL575-2118-5
51
36.9
34.6
32.57
25
No.n
3.5±0.3
RoHS
YES
Note 1: Packaged in trays.
Note 2: Dimensions in parenthesis ( ) are reference dimensions.
●Ground plate for micro-coaxial cable
1.55±0.2
B±0.2
2.2±0.2
11.45±0.3
A±0.2
Part number
CL No.
Number of contacts
A
B
FX15S-41P-GND
CL575-2111-6
41
29.2
30.06
FX15S-51P-GND
CL575-2117-2
51
34.2
35.06
RoHS
YES
Note 1: Packaged in trays.
Note 2: Dimensions in parenthesis ( ) are reference dimensions.
B279
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS
products
have been discontinued,
will be discontinued soon.
Please check the
products status
on thesignal
Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15
Series●1mm
Pitch or
Cable-to-Board
Connectors
supporting
LVDS
●Applicable cable (Micro-coaxial cable)
Wire size
(Standed wire inner conductor)
Jacket diameter
AWG #36 (7/0.05 mm)
AWG #38 (7/0.04 mm)
0.3mm to 0.5mm
AWG #40 (7/0.03 mm)
Number of contacts
A
B
41
23.1
20
51
28.1
25
●Cable preparation
Insulator
Gronding bar
Outer conductor
Jacket
B280
0
2.1-0.1
Inner conductor
1+0.05
-0.2
0.9 MAX
P=0.5±0.07
Solder coat
1 MIN
A±0.2
B±0.15
AWG#36 to 40 Micro-coaxial cable
0.6±0.1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the productsFX15
status on
the Hirose websitePitch
RoHS search
at www.hirose-connectors.com,
or contact
your Hirose
sales representative.
Series●1mm
Cable-to-Board
Connectors
supporting
LVDS
signal
■Receptacles
●Vertical, with shields (FX15-31S-0.5SV)
25.7±0.3
19.82±0.2
15±0.15
P=0.5±0.1
No.1
No.31
b
(6)
5.6±0.3
4±0.3
a
No.30
(0.8)
No.2
e
f
d
4.8±0.3
0.9±0.2
c
1.5±0.2
1±0.2
1±0.2
1.5±0.2
0.8±0.1
22.8±0.3
Part number
CL No.
Number of contacts
RoHS
FX15-31S-0.5SV
CL575-2201-7
31
YES
BRecommended PCB mounting pattern and metal mask dimensions
22.8±0.05
0.3±0.03(Land)
0.25±0.03(Metal mask)
6.7 +0.1
0
3.2 +0.05
0
0
1.5 -0.05
P=0.5±0.03
0
2.2 -0.1
15±0.05
2-Ø1(TH)
2
0.2 +0.1
0
2-Ø1.4(LND)
0
0.9 -0.1
4.1+0.1
0
0
17.72 -0.1
21.92 +0.1
0
Note 1 :The co-planarity of the terminal leads is as follows:
• All signals and shield leads “c” and “d”: 0.1mm max.
• Shield leads “a”, “b”, “e” and “ f ”: 0.15 mm max.
2 : Area indicated by the crosshatched lines must be free of conductive traces or the conductive traces must be covered by resist film.
3 : Packaged on tape-and-reel, 1000 pieces per reel.
4 : Dimensions in parenthesis ( ) are reference dimensions.
B281
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS
products
have been discontinued,
will be discontinued soon.
Please check the
products status
on thesignal
Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15
Series●1mm
Pitch or
Cable-to-Board
Connectors
supporting
LVDS
●Right angle with shields – enhanced shielding (FX15S-**S-0.5SH)
4
No.n
No.n-1
(4)
(3)
Polarizing mark
indicator
4
(2.6)
No.2
No.1
5
(0.2) 4.45±0.1 (1.7)
A±0.2
0.5±0.1
0.2±0.05
B±0.2
C±0.15
4.4±0.3
P=1±0.1
P=1±0.1
D±0.15
E±0.3
Number of contacts
A
B
C
D
E
F
G
H
FX15S-31S-0.5SH CL575-2306-5
Part number
HRS No.
31
15
27.4
14
15
27.8
28.8
24.8
21.6
FX15S-41S-0.5SH CL575-2307-8
41
20
32.4
19
20
32.8
33.8
29.8
26.6
FX15S-51S-0.5SH CL575-2303-7
51
25
37.4
24
25
37.8
38.8
34.8
31.6
J
K
L
M
N
P
R
S
18
15
------
------
13.2
16.8
24.8
40
23
20
5.2
8.8
18.2
21.8
29.8
45
28
25
5.2
8.8
23.2
26.8
34.8
50
RoHS
YES
BRecommended PCB mounting pattern and metal mask dimensions
F +0.05
0
0
G -0.05
0
1.45 -0.05
0.5±0.03
0
1.7 -0.05
0
J -0.05
K±0.05
0.3±0.03(Land)
0.25±0.03(Metal mask)
2.2 +0.05
0
3
0
L -0.05
M +0.05
0
0
N23.2 -0.05
P26.8 +0.05
0
2
13.85
4.25
2
3.7 +0.05
3.7 +0.05
0
0
4.15
3.55 +0.05
0
0
2.05 -0.05
H+0.05
0
R
3
2
S
Note 1 : The coplanarity of the terminal leads is 0.1 mm max. for all signal leads and 0.15 mm max. for the shield leads.
2 : Do not place any components in the area indicated. Placement of components in this area may affect mating and latch lock
operation.
3 : Area indicated by the cross-hatched lines must be free of conductive traces or the conductive traces must be covered by resist film.
4 : The area marked
indicates vacuum pick-and-place area for board placement with automatic equipment.
5 : Vacuum pick-up area
6 : Packaged on tape-and-reel, 1000 pieces per reel.
7 : Dimensions in parenthesis ( ) are reference dimensions.
B282
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the productsFX15
status on
the Hirose websitePitch
RoHS search
at www.hirose-connectors.com,
or contact
your Hirose
sales representative.
Series●1mm
Cable-to-Board
Connectors
supporting
LVDS
signal
●Right angle, without shields (FX15M-**S-0.5SH)
A±0.2
0.5±0.1
0.2±0.05
No.n-1
No.n
6.15±0.3
No.2
No.1
Polarizing mark
(5.5)
indicator
Vacuum pick and place area
4.8±0.3
4.3±0.3
B±0.2
C±0.15
P=1±0.1
P=1±0.1
D±0.15
6.55±0.3
Part number
HRS No.
Number of contacts
A
B
C
D
E
F
G
FX15M-21S-0.5SH
CL575-2309-3
21
10
22.4
9
10
17.9
10
35
FX15M-31S-0.5SH
CL575-2308-0
31
15
27.4
14
15
22.9
15
40
RoHS
YES
BRecommended PCB mounting pattern and metal mask dimensions
E±0.05
4
2
14
2
3.4+0.05
0
0.25±0.03(Metal mask)
0.9±0.03
0
1.9-0.05
0.3±0.03(Land)
P=0.5±0.03
0
3.7-0.05
7.4+0.05
0
(1.85)
F±0.05
2
G
Note 1 : The co-planarity of all terminal leads is 0.1 mm max.
2 : Do not place any components in the area indicated. Placement of components in this area may affect mating and
latch lock operation.
3 : Packaged on tape-and-reel, 1000 pieces per reel.
B283
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS
products
have been discontinued,
will be discontinued soon.
Please check the
products status
on thesignal
Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15
Series●1mm
Pitch or
Cable-to-Board
Connectors
supporting
LVDS
●Right angle with shields – enhanced shielding (FX15SC-**S-0.5SH)
PCB mounting pattern : VESA standard
A±0.3
B±0.2
C±0.2
P=0.5±0.1
0.18±0.05
No.n
(1.1)
No.1
4.45±0.2
P=D±0.1
0.5±0.1
Polarizing mark
indicator
(0.25 )
1.5±0.1
3.1±0.2
1.5±0.1
E±0.2
F±0.3
G±0.15
4.4±0.3
P=1±0.1
P=1±0.1
H±0.15
Number of contacts
A
B
C
D
E
F
G
H
J
K
FX15SC-41S-0.5SH CL575-2310-2
Part number
HRS No.
41
32.85
26
20
4
20
32.4
19
20
29.75
45
FX15SC-51S-0.5SH CL575-2311-5
51
37.85
31
25
5
25
37.4
24
25
34.75
50
RoHS
YES
BRecommended PCB mounting pattern and metal mask dimensions
B±0.05
No.1
No.n
2.05±0.05
12
6-1.3±0.05
E±0.05
J±0.05
2
2
1.55±0.05
3.5±0.05
P=D±0.05
5.6
2.5±0.05
2
n-0.25±0.03
5.1±0.05
P=0.5±0.03
2.5±0.05
1.55±0.05
C±0.05
3
K
Note 1 : The coplanarity of the terminal leads is 0.1 mm max.
2 : Do not place any components in the area indicated. Placement of components in this area may affect mating and latch lock
operation.
3 : Area indicated by the cross-hatched lines must be free of conductive traces or the conductive traces must be covered by resist film.
4 : Packaged on tape-and-reel, 1000 pieces per reel.
5 : Dimensions in parenthesis ( ) are reference dimensions.
B284
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the productsFX15
status on
the Hirose websitePitch
RoHS search
at www.hirose-connectors.com,
or contact
your Hirose
sales representative.
Series●1mm
Cable-to-Board
Connectors
supporting
LVDS
signal
●Vertical with shields – enhanced shielding (FX15SC-**S-0.5SV)
PCB mounting pattern : VESA standard
A±0.2
No.1
No.n
B±0.2
0.18±0.05
P=0.5±0.1
1.5±0.1
P=C±0.1
0.5±0.1
D±0.2
E±0.3
5.3±0.3
4.2±0.2
5.5±0.3
Part number
CL No.
Number of contacts
A
B
C
D
E
FX15SC-41S-0.5SV
CL575-2205-8
41
26
20
4
20
32.4
FX15SC-51S-0.5SV
CL575-2204-5
51
31
25
5
25
37.4
RoHS
YES
BRecommended PCB mounting pattern and metal mask dimensions
A±0.05
No.n
B±0.05
P=0.5±0.3
n-0.25±0.03
2.5±0.05
2
1.55±0.05
3.5±0.05
1.55±0.05
No.1
P=C±0.05
6-1.3±0.05
2.5±0.05
D±0.05
A±0.05
Note 1 : The coplanarity of the terminal leads is 0.1 mm max.
2 : Area indicated by the cross-hatched lines must be free of conductive traces or the conductive traces must be covered by resist film.
3 : Packaged on tape-and-reel, 1000 pieces per reel.
B285
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS
products
have been discontinued,
will be discontinued soon.
Please check the
products status
on thesignal
Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15
Series●1mm
Pitch or
Cable-to-Board
Connectors
supporting
LVDS
■Packaging Specifications
●Vertical, with shields
FX15-31S-0.5SV
CL575-2201-7
31
44.5
(6.3)
(4.8)
(0.5)
●Right angle, with shields-enhanced shielding
A
A
A
A
A
20.25±0.1
40.45±0.1
44±0.3
Ø1
.
5
12±0.1
2±0.15 4±0.1
1.75±0.1
D
5
Number of contacts
Ø1
.
HRS No.
+
0
0 .1
Part number
+
0
0 .1
Unreeling direction
(FX15-31SC-0.5SV)
Unreeling direction
(FX15S-**S-0.5SH)
A
B
C
D
31
20.3 40.5 44 44.5
FX15S-41S-0.5SH CL575-2307-8
41
26.3 52.5 56 56.5
FX15S-51S-0.5SH CL575-2303-7
51
26.3 52.5 56 56.5
4±0.1
B±0.1
C±0.3
FX15S-31S-0.5SH CL575-2306-5
A±0.1
Number of contacts
+
0
0 .1
HRS No.
(4.7)
(0.5)
Ø1
.5
Part number
(6.7)
12±0.1
●Right angle, without shields
(FX15M-**S-0.5SH)
Unreeling direction
(6.5)
Number of contacts
A
B
C
D
21
20.2 40.4 44 44.5
FX15M-31S-0.5SH CL575-2308-0
31
20.2 40.4 44 44.5
(5.15)
(0.5)
A±0.1
B±0.1
C±0.3
FX15M-21S-0.5SH CL575-2309-3
12±0.1
2±0.1 4±0.1
0
0 .1
HRS No.
Ø1
.5 +
Part number
●Reel dimensions
B286
(Ø80)
(Ø380)
Ø1
3±
0.5
(1.6)
(D)
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the productsFX15
status on
the Hirose websitePitch
RoHS search
at www.hirose-connectors.com,
or contact
your Hirose
sales representative.
Series●1mm
Cable-to-Board
Connectors
supporting
LVDS
signal
●Right angle with shields – enhanced shielding
Number of contacts
A
B
C
D
41
26.2 52.4 56 56.5
FX15SC-51S-0.5SH CL575-2311-5
51
26.2 52.4 56 56.5
12±0.1
2±0.1
(6.7)
(0.5)
4±0.1
YES
B±0.1
C±0.3
FX15SC-41S-0.5SH CL575-2310-2
RoHS
A±0.1
HRS No.
Ø1
.5
Part number
+0
0 .1
Unreeling direction
(FX15SC-**S-0.5SH)
●Vertical with shields – enhanced shielding
(FX15SC-**S-0.5SV)
Unreeling direction
A
B
C
D
41
26.2 52.4 56 56.5
FX15SC-51S-0.5SV CL575-2204-5
51
26.2 52.4 56 56.5
12±0.1
2±0.1
4±0.1
(7)
(0.5)
YES
B±0.1
C±0.3
A±0.1
FX15SC-41S-0.5SV CL575-2205-8
RoHS
+
0
0 .1
Number of contacts
.5
HRS No.
Ø1
Part number
●Reel dimensions
(E)
(Ø80)
(Ø380)
Ø1
3±
0.5
(1.6)
B287
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS
products
have been discontinued,
will be discontinued soon.
Please check the
products status
on thesignal
Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15
Series●1mm
Pitch or
Cable-to-Board
Connectors
supporting
LVDS
BRecommended temperature profile
250
230
230ç
180ç
Te mp e r a t u r e ( ç )
180
150
HRS test conditions
Test boardGlass epoxy 40mm∞30mm∞1mm thick
Solder method
:Reflow
Solder composition
:Paste,
96.5%Sn/3%Ag/0.5%Cu
Metal mask
: 0.12mm thick
Reflow cycles
: 2 cycles
MAX 250ç
150ç
100
25
0
90±30sec.
30±10sec.
Preheating(150 to 180ç)
Sodering
(230çmin)
Time (sec.)
The temperature profile is based on the above
conditions.
In individual applications the actual temperature may
vary, depending on solder paste type,
volume/thickness and board size/thickness. Consult
your solder paste and equipment manufacturer for
specific recommendations.
Note: The temperature profile indicates the maximum temperature
of the connector surfaces at the highest point from the PCB
mounting surface.
BCleaning recommendations
Organic solvent cleaning
Room temperature cleaning
Heated cleaning
IPA (Isoporopyl alcohol)
Solvent type
YES
YES
HCFC (Hydrochlorofluorocarbon)
YES
YES
Water based cleaning
When using water based cleaning agents (e.g., terpene, alkali saponifiers), select the cleaning agent based on the documentation
issued by the various manufacturers of cleaning agents which describes it’s affects on metals, platings and plastics. Remove any
moisture after cleaning. Residual flux or cleaning agents in the contact areas may affect electrical performance.
B288
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the productsFX15
status on
the Hirose websitePitch
RoHS search
at www.hirose-connectors.com,
or contact
your Hirose
sales representative.
Series●1mm
Cable-to-Board
Connectors
supporting
LVDS
signal
Precautions and recommendations
◆Wire termination
The following documents will be needed in order to perform the cable terminations.
1Basic cable termination and crimp requirements (general explanations).
2Contact crimp termination machine instruction manual (Explanation of the press)
3Applicator parts installation table (Applicator installation explanation)
4Crimp conditions table (Crimp height/Tensile strength standard values)
5Crimp quality fundamentals manual (Bell-mouth dimensions, bent up, bent down, rolling, etc.)
* Correct cable preparation and crimp termination is based on understanding and following the procedures in the above documents.
◆Insertion of the crimp contacts in the housing
Crimp contacts are inserted in the housing as illustrated below.
Exercising caution when inserting, align the retention tab of the contact with the corresponding molded-in lance in the housing’s contact cavity and
push the contacts in.
Make sure that the contact is fully inserted and the retention tab clears the molded-in lance.
Molded-in lance
Molded-in lance
Retention tab facing up
Molded-in lance
Retention tab facing down
Retention tab
Crimp side
◆Verify that the retention tabs clear the molded-in lances as shown on the illustration below.
Retention tab
Light pull on the wire, with force NOT EXCEEDING 3N will also verify the correct contact insertion.
◆Removal of the contacts
Using sharp-pointed tool of appropriate size gently lift the molded-in tab and pull-out the terminated contacts.
Excersize caution as NOT to damage the molded-in lance.
Should the damage occur, the entire housing will need to be replaced.
1
2
B289
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS
products
have been discontinued,
will be discontinued soon.
Please check the
products status
on thesignal
Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15
Series●1mm
Pitch or
Cable-to-Board
Connectors
supporting
LVDS
Precautions and recommendations
[ Soldering precautions related to FX15S-**P-C connectors ]
◆Grounding Methods of the ground wire or shields for the cable assemblies
1Solder the ground wire or the shields ONLY in the areas specifically designated for this purpose, as shown on the illustrations below.
2Observe the soldering iron tip temperature and soldering time specified.
3Do not apply excessive force to the connector by pressing it with the tip of a soldering iron.
4Do not splatter the flux from the solder core.
Soldering area 2
Soldering area 1
B
(Ground harness examples)
B290
B
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the productsFX15
status on
the Hirose websitePitch
RoHS search
at www.hirose-connectors.com,
or contact
your Hirose
sales representative.
Series●1mm
Cable-to-Board
Connectors
supporting
LVDS
signal
Precautions and recommendations
◆Plug – micro-coaxial cable
[ Coutions for soldring ]
1. For the micro coaxial cable assembled to this connector, cable alignment process as shown in "Recommended cable" on the page 1 is required
before assembly.
1Width of ground bar shall be 1.05 mm Max. including misalignment of overlapping, flush by cutting, side drop or soldering.
Using an inadequate cable will interfere the assembly to the connector. Forceful assembly and soldering could cause mis-soldering to defective
product.
2Minimize the length of outer conductor beyond the ground the bar.
Inner conductor
rSolder coating
e
3Length of cutting the extra cable shall be 2.1 mm Max.
Its over length will cause the cable touching the connector body
during assembly and cause defective product.
Minimal length 2.0 mm is a recommended dimension and allowed
to be changed if necessary, as long as ensuring good solderability.
q
w
Grounding bar
Outer conductor
w
4Pre-solder and coat the inner conductor at the cable end.
2. Recommended solder for the assembly is flux cored solder with 0.2
mm dia. (Lead-free: Sn-3Ag-0.5Cu), 21 mm length.
If you consider using additional flux, please pay enough attention not
to have flux wicking to the contact area.
Flux wicking to the contact area will cause contact failure.
3. Place the cable to the connector and check the below points before
soldering by cable assembly machine.
1Misalinment of cable end to the terminals in pitch direction
2Excessive floating of cable end
4. Follow the recommended temperature profile shown below for the
soldering.
qMisalignment in pitch direction
wfloating
However, the optimum condition could vary depending on various including type of cable and its length, solder type. Therefore refer to the
recommended temperature profile and optimize the condition if necessary.
Heating
265ç
Solder tip
pressurization
13~17N
250ç
Pre-heating
220ç
Heating
Temperature
265±5ç
Duration
3~4 sec
Idling 50ç
2s
1s
2s
3-4s
Duration of pressure application
B291
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS
products
have been discontinued,
will be discontinued soon.
Please check the
products status
on thesignal
Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15
Series●1mm
Pitch or
Cable-to-Board
Connectors
supporting
LVDS
Precautions and recommendations
5. After soldering, check that no defect is found at soldered area.
Examples of correct soldered and defective soldered state are shown below.
Solder shortage
A
AA
solder bridge
A
B
BB
B
Floating
Correct soldering
[ Coutions for potting process ]
1. Protect the soldered area by UV cured resin (referred as "potting" hereafter), in order to prevent cable breakage during cabling and other troubles.
2. Apply 3033 manufactured by THREEBOND CO., LTD. or any equivalent product for potting.
Follow the instruction of potting manufacture's for the condition of UV exposure.
3. Refer to the following conditions the potting area.
Number of contacts
A
41
23.7
51
28.7
0
1.25 -0.75
A -30
0
2.15 -0.4
A
Enlarged view
4. Use extreme care for the handling after solding to the end potting process not to apply stress to the cable, otherwise, cable could be broken.
B292
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the productsFX15
status on
the Hirose websitePitch
RoHS search
at www.hirose-connectors.com,
or contact
your Hirose
sales representative.
Series●1mm
Cable-to-Board
Connectors
supporting
LVDS
signal
Precautions and recommendations
[ Coutions for ground plate assembly ]
1. Attach a ground plate separately provided as FX15S-41P-GND after the cable assembly process.
2. Place the ground plate onto the connector horizontally and pinch two components from top and bottom with fingers.
Pinch from top and bottom with fingers
Ground plate
(FX15S-41P-GND)
A
A
wHorizontally
from the top
qAssembly
ePinch with fingers
3. Check the six fitting points after assembly and make sure that they are all correctly fitted together.
How to check fitting points
(Cut section of fitting points)
Fitting
Fitting
A
Fitting
Fitting
Fitting
Ground plate hooks the
protrusion of connector housing
Ground plate does not hook the
protrusion of connector housing
Fitting
NG
OK
[ Soldering to ground plate ]
1. Solder down the metal bar of the cable and ground plate after the assembly of ground plate in order to enhance the grounding performance and
robustness against cable stroke to up and down direction.
Soldering
Soldering
A
B293
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS
products
have been discontinued,
will be discontinued soon.
Please check the
products status
on thesignal
Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15
Series●1mm
Pitch or
Cable-to-Board
Connectors
supporting
LVDS
Precautions and recommendations
◆Packaging of the complete cable assemblies
Exercise caution as not to tangle, twist or deform the complete cable assemblies when packaging. Special care should be taken NOT to apply any
excessive pull forces to the individual wires.
When removing the cable assemblies from the packaging do not pull on the wires. Make sure that the latch-locks are not interfering with packaging.
Packaging
Connectors
◆Mating of the connectors
The connectors have built-in polarizing feature and will NOT mate when reversed. Do NOT try forced mating.
Align the connectors as shown on the illustration below and fully insert the plug into the receptacle. Confirm that both latch-locks are fully engaged.
Triangle mark
Triangle mark
Arrow mark
Mating
Center mark
B294
Center mark
Mating
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the productsFX15
status on
the Hirose websitePitch
RoHS search
at www.hirose-connectors.com,
or contact
your Hirose
sales representative.
Series●1mm
Cable-to-Board
Connectors
supporting
LVDS
signal
Precautions and recommendations
◆Handling of Connectors after Mating
Do not to apply excessive forces to the connectors when routing the cable after mating.
Pulling on the entire cable with a force of 20 N or greater can damage the connector. Please take due care not to pull the cable.
◆Un-mating of the connectors
Depress equally both sides of the latch-locks as shown on the illustration and pull the plug straight out. Do not pull on the cables!
B
B
1
Press
1
Press
1
Press
1
Press
2Pull straight apart
B
Lock latches
B
B
B295
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS
products
have been discontinued,
will be discontinued soon.
Please check the
products status
on thesignal
Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX15
Series●1mm
Pitch or
Cable-to-Board
Connectors
supporting
LVDS
BTechnical Information (FX15S Series)
●Eye Pattern Waveforms (700 MHz)
1 m Cable Length
1.5 m Cable Length
●Shielding Effectiveness (Shielding Characteristics Comparison Using a 2-chamber Shielded Room)
Measured shielding effectiveness for frequencies from 100 MHz to 2 GHz.
Shielded connectors show noise suppression of 10 db to 20 dB, when compared with connectors without the shields.
60
With cable-side shields + With PCB-side shields
50
With cable-side shields + Without PCB-side shields
40
Shielding Effect (dB)
Without cable-side shields + With PCB-side shields
30
Without cable-side shields + Without PCB-side shields
➝ (0 dB line)
20
10
0
-10
0.1
0.15
0.2
0.3
0.4
0.5
0.6 0.7 0.8 0.9 1
1.5
2
Frequency (GHz)
Notes:The measurement value of "Without plug-side shields + Without receptacle-side shields” are taken
as the zero level of the graph vertical axis dB.
The respective results express the noise suppression effect (dB) as a relative comparison value
with this "without shields” condition as the reference.
B296
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Hirose Electric:
AP105-FX15-3032 FX15-3032PCFA FX15-2830PCFB FX15-3032PCFB FX15-31P-C FX15S-51P-C FX15S-31P-C
FX15S-41P-C FX15S-41P-C(61) FX15M-31P-C FX15M-21P-C FX15S-41P-0.5SD FX15S-41P-GND FX15SW31P-C FX15S-51P-GND FX15S-51P-0.5SD FX15-31S-0.5SV FX15SC-51S-0.5SV FX15SC-41S-0.5SV FX15S-51S0.5SH FX15S-31S-0.5SH FX15S-41S-0.5SH FX15M-31S-0.5SH FX15M-21S-0.5SH FX15SC-51S-0.5SH FX15S31S-0.5SH(30) FX15M-31S-0.5SH(30) FX15-31S-0.5SV(30) FX15M-21S-0.5SH(30) FX15S-51P-0.5FC FX15S-51PGND(A)
Similar pages