Multipurpose Enclosures Specifications : Polycarbonate material : Moulded in Operating temperature Clear lid is available on request. : Light grey. : -40°C to 120°C. High impact ABS material : Moulded in : Dark grey. Suggested operating temperature : -20°C to 80°C. The lid and base incorporate a tongue and groove sealing system with a neoprene gasket. Wall mounting holes and lid fixing screws are outside the sealing area thus preventing the ingress of moisture and dust. Designed to IP 65 of IEC 529 and nema 4 (dust and hoseproof). Available with clear or light grey LIDS. Internal guide slots for mounting PCB assemblies vertically. Bosses on internal base allow fixing of PCB's horizontally or connection of terminals, etc into threaded brass inserts. Lid fixing screw are M-4 stainless steel (nonmagnetic) into threaded brass inserts. Specifications Table External Dimensions (mm) Part Number Box, ABS, IP65, Grey 64 × 58 × 35 G302 Box, ABS, IP65, Grey 115 × 65 × 40 G304 Box, ABS, IP65, Grey 115 × 65 × 55 G308 115 × 90 × 55 G311 Box, ABS, IP65, Grey 171 × 121 × 55 G313 Box, ABS, IP65, Grey 222 × 146 × 55 G317 Box, ABS, IP65, Grey 115 × 90 × 80 G331 Box, ABS, IP65, Grey 171 × 121 × 80 G340 Description Colour Material Box, ABS, IP65, Grey Dark Grey ABS www.element14.com www.farnell.com www.newark.com Page <1> 13/05/11 V1.1 Multipurpose Enclosures Specifications Table External Dimensions (mm) Part Number Box, ABS, IP65, Grey 195 × 80 × 55 G346 Box, ABS, IP65, Grey 222 × 146 × 75 G353 Box, ABS, IP65, Grey 52 × 50 × 35 G362 Box, ABS, IP65, Grey 82 × 80 × 55 G366 Box, ABS, IP65, Grey 160 × 80 × 55 G368 Box, ABS, IP65, Grey 200 × 120 × 75 G373 Box, ABS, IP65, 265 × 185 × 95mm 265 × 185 × 95 G378 120 × 120 × 60 G386 Box, ABS, IP65, Grey 120 × 120 × 90 G387 Box, ABS, IP65, Grey 160 × 160 × 60 G396 Box, ABS, IP65, Grey 160 × 160 × 90 G399 Box, ABS, IP65, 240 × 160 × 90mm 240 × 160 × 90 G3008 Box, ABS, IP65, 240 × 160 × 120mm 240 × 160 × 120 G3019 Box, ABS, IP65, 300 × 230 × 86mm 300 × 230 × 86 G3028 Box, ABS, IP65, 300 × 230 × 111mm 300 × 230 × 111 G3031 Box, ABS, IP65, 360 × 200 × 150mm 360 × 200 × 150 G3039 Description Colour Material Box, ABS, IP65, Grey Dark Grey ABS Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2011. www.element14.com www.farnell.com www.newark.com Page <2> 13/05/11 V1.1