J104 RoHS Compliant 20.0 (21.0) x 9.8 x 10.8 mm E197851 Features res • • • • High sensitivity, super light weight Conforms to FCC part 68 PC board mounting Available bifurcated contacts for high reliability Contact Data* J104A & J104B - Bifurcated Contacts Standard Version J104C - Bifurcated Contacts Low Cost Version Contact Arrangement 2C = DPDT 2C = DPDT Contact Rating 2A @ 30VDC 1A @ 24VDC 3A @ 30VDC N.O. 1A @ 125VAC .6A @ 125VAC Contact Resistance < 50 milliohms initial < 50 milliohms initial Contact Material AgNi + Au clad Ag Maximum Switching Power 60W, 75VA 24W, 125VA Maximum Switching Voltage 250VAC, 220VDC 250VAC, 220VDC Maximum Switching Current 3A 3A Coil Data* Coil Voltage VDC Coil Resistance Ω +/- 10% Pick Up Voltage Release Voltage VDC (max) VDC (min) 75% of rated voltage 10% of rated voltage Rated Max .15W .20W .36W .40W .51W .55W 3 3.9 60 45 25 23 17.6 16 2.25 .3 5 6.5 167 125 56 63 39.7 45 3.75 .5 9 11.7 540 405 100 203 70.6 140 6.75 .9 12 15.6 960 720 400 360 282 280 9.00 1.2 24 31.2 N/A 2880 1600 1440 1129 1070 18.00 2.4 48 62.4 N/A 11.5K N/A 5760 4518 3900 36.00 4.8 Coil Power W Operate Time ms Release Time ms .15 .20 .36 .40 .51 .55 4.5 1.5 General Data* * Electrical Life @ rated load 500K cycles, average Mechanical Life 100M cycles, average Insulation Resistance 100M Ω min. @ 500VDC initial Dielectric Strength J104A & J104B Coil to Contact 1500V rms min. initial Contact to Contact 1000V rms min. initial J104C Values can change due to the switching frequency, desired reliability levels, environmental conditions and in-rush load levels. It is recommended to test actual load conditions for the application. It is the user’s responsibility to determine the performance suitability for their specific application. The use of any coil voltage less than the rated coil voltage may compromise the operation of the relay. 1000V rms min. initial 500V rms min. initial 100m/s2 for 11 ms Shock Resistance Vibration Resistance 1.50mm double amplitude 10~40Hz Terminal (Copper Alloy) Strength 5N Operating Temperature -40oC to +85oC Storage Temperature -40oC to +155oC Solderability 260oC for 5 s Weight 4.5g www.citrelay.com phone - 763.535.2339 Dimensions shown in mm. Dimensions are shown for reference purposes only. fax - 763.535.2194 page 1 Specifications and availability subject to change without notice. J104 Ordering Information 1. Series J104A 2C 12VDC .55 S J104A **.40W, .55W coil power only J104B **.15W, .20W coil power only J104C **.20W, .36W, .51W coil power only (only available on 5, 12 & 24 VDC coil) 2. Contact Arrangement 2C = DPDT 3. Coil Voltage 3VDC 5VDC 9VDC 12VDC 24VDC **not available with .15W coil power 48VDC **not available with .15W or .36W coil power 4. Coil Power J104A .40 = .40W .55 = .55W J104B .15 = .15W .20 = .20W J104C .20 = .20W .36 = .36W .51 = .51W 5. Sealed S = Sealed (standard) Dimensions Units = mm 20.18 [.79] 9.95 [.39] 20.30 [.80] 10.60 [.42] 10.95 [.43] 7.62 [.30] 0.50 TYP [.02] 5.08 [.20] 5.08 [.20] 1.20 [.05] 1.17 [.05] 7.62 [.30] 10.00 [.39] 11.45 [.45] 11.20 [.44] 7.62 [.30] 3.55 TYP [.14] (2X) 0.40 [.02] 5.08 [.20] 5.08 [.20] 1.26 [.05] 1.19 [.05] 0.50 TYP [.02] J104A & J104B www.citrelay.com 3.45 TYP [.14] 0.30 TYP [.01] 0.30 TYP [.01] page 1 7.62 [.30] J104C phone - 763.535.2339 Dimensions shown in mm. Dimensions are shown for reference purposes only. fax - 763.535.2194 Specifications and availability subject to change without notice. J104 Schematics & PC Layouts Bottom Views 7.62 [.30] 5.08 [.20] Ø1.00 TYP [.04] 7.62 [.30] 5.08 [.20] www.citrelay.com phone - 763.535.2339 Dimensions shown in mm. Dimensions are shown for reference purposes only. fax - 763.535.2194 page 1 Specifications and availability subject to change without notice.