CREE CP41A-AHS Cree p4 led Datasheet

CLD-CT1256.003
PRODUCT FAMILY DATA SHEET
Cree® P4 LED
CP41A-RDS/ADS
CP41A-RFS/AFS
CP41A-RHS/AHS
PRODUCT DESCRIPTION
FEATURES
APPLICATIONS
This revolutionary package design
•
Size (mm): 7.6 x 7.6
• Channel Letter
•
Color and Typical Dominant
Wavelength:
Red (624nm)
Amber(591nm)
• Amusement
•
Luminous Flux (mlm)
CP41A-RDS:(4400-8730)
CP41A-RFS:(4400-8730)
CP41A-RHS:(4400-8730)
CP41A-ADS:(4400-11000)
CP41A-AFS:(4400-11000)
CP41A-AHS:(4400-11000)
reflectors or lenses to efficiently
•
Lead - Free
distribute
•
RoHS Compliant
allows the lighting designer to reduce
the number of LEDs required and
provide a more uniform and unique
illuminated appearance than with
other LED solutions.
This is possible through the efficient
optical-package design and highcurrent capabilities. The low-profile
package can be easily coupled with
light
and
provide
the
desired lit appearance. This product
family employs green and blue LED
materials, which allows designers
to match the color of many lighting
applications such as vehicle signal
WWW.CREE.COM/HB
lamps and amusement lighting.
Copyright © 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
the Cree logo are registered trademarks of Cree, Inc.
Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
Cree P4 LED
CP41A-RDS/ADS
CP41A-RFS/RFS
CP41A-RHS/AHS
ABSOLUTE MAXIMUM RATINGS (TA = 25°C)
Items
Symbol
Absolute Maximum Rating
Unit
Red/Amber
Forward Current
Peak Forward Current
IF
70
mA
Note1
IFP
100
mA
VR
5
V
PD (Red)
238
mW
PD (Amber)
224
mW
Operation Temperature
Topr
-40 ~ +100
°C
Storage Temperature
Tstg
-40 ~ +100
°C
Lead Soldering Temperature
Tsol
Max. 260°C for 5 sec. max.
(3 mm from the base of the epoxy bulb)
ESD
Class 2
Note2
Reverse Voltage
Power Dissipation
Electrostatic Discharge
Classification (MIL-STD-883E)
Note:
1. A heat sink is recommended if the device is operated at ambient temperatures higher than 25°C.
2. Pulse width ≤0.1 msec, duty ≤1/10.
TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (TA = 25°C)
Characteristics
Color
Forward Voltage
Reverse Current
Dominant Wavelength
Red
Luminous Flux
Amber
Symbol
Condition
Unit
Red
VF
IF = 70 mA
Typical
Maximum
V
2.3
3.2
2.5
Amber
VF
IF = 70 mA
V
Red/Amber
IR
VR = 5 V
μA
Red
λD
IF = 70 mA
nm
620
624
630
Amber
λD
IF = 70 mA
nm
587
591
596
CP41A-RDS (40 degree)
Φv
IF = 70 mA
mlm
4400
5500
CP41A-RFS (70 degree)
Φv
IF = 70 mA
mlm
4400
6000
CP41A-RHS (100 degree)
Φv
IF = 70 mA
mlm
4400
6500
CP41A-ADS (40 degree)
Φv
IF = 70 mA
mlm
4400
6200
CP41A-AFS (70 degree)
Φv
IF = 70 mA
mlm
4400
6600
4400
7200
CP41A-AHS (100 degree)
50% Power Angle
Minimum
3.2
100
Φv
IF = 70 mA
mlm
CP41A-RDS/ADS
2θ½
IF = 70 mA
deg
40
CP41A-RFS/AFS
2θ½
IF = 70 mA
deg
70
CP41A-RHS/AHS
2θ½
IF = 70 mA
deg
100
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
of Cree, Inc.
2
Cree P4 LED
CP41A-RDS/ADS
CP41A-RFS/RFS
CP41A-RHS/AHS
FLUX BIN LIMIT (IF = 70 mA)
Red
Amber
CP41A-RDS/RFS/RHS (40/70/100 degree)
CP41A-ADS/AFS/AHS (40/70/100 degree)
Bin Code
Min.(mlm)
Max.(mlm)
Bin Code
Min.(mlm)
Max.(mlm)
L0
4400
5500
L0
4400
5500
M0
5500
6600
M0
5500
6600
N0
6600
8730
N0
6600
8730
P0
8730
11000
• Tolerance of measurement of luminous flux is ±15%
COLOR BIN LIMIT (IF = 70 mA)
Red
Amber
Bin Code
Min.(nm)
Max.(nm)
Bin Code
Min.(nm)
Max.(nm)
RJ
620
630
A3
587
590
A4
590
593
A5
593
596
• Tolerance of measurement of dominant wavelength is ±1 nm
VF BIN LIMIT (IF = 70 mA)
Red Amber Bin Code
Min.(V)
Max.(V)
Bin Code
Min.(V)
Max.(V)
23
2.0
2.2
23
2.0
2.2
24
2.2
2.4
24
2.2
2.4
25
2.4
2.6
25
2.4
2.6
26
2.6
2.8
26
2.6
2.8
27
2.8
3.0
27
2.8
3.0
28
3.0
3.2
28
3.0
3.2
• Tolerance of measurement of VF is ±0.05V.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
of Cree, Inc.
3
Cree P4 LED
CP41A-RDS/ADS
CP41A-RFS/RFS
CP41A-RHS/AHS
ORDER CODE TABLE*
Luminous Flux (mlm)
Dominant Wavelength
Color
Kit Number
Viewing
Angle
Red
CP41A-RDS-CL0N0JJ4
40
Color
Kit Number
Viewing
Angle
Min.
Max.
Color
Bin
Min.
(nm)
Color
Bin
Max.
(nm)
Red
CP41A-RFS-CL0N0JJ4
70
4400
8730
RJ
620
RJ
630
Color
Kit Number
Viewing
Angle
Min.
Red
CP41A-RHS-CL0N0JJ4
100
Red
CP41A-RHS-CM0N0JJ4
100
Color
Kit Number
Viewing
Angle
Amber
CP41A-ADS-CL0P0354
Amber
CP41A-ADS-CL0P0454
Color
Kit Number
Viewing
Angle
Min.
Max.
Color
Bin
Min.
(nm)
Color
Bin
Max.
(nm)
Amber
CP41A-AFS-CL0P0354
70
4400
11000
A3
587
A5
596
Amber
CP41A-AFS-CL0P0454
70
4400
11000
A4
590
A5
596
Amber
CP41A-AFS-CM0P0354
70
5500
11000
A3
587
A5
596
Color
Kit Number
Viewing
Angle
Min.
Max.
Color
Bin
Min.
(nm)
Color
Bin
Max.
(nm)
Amber
CP41A-AHS-CL0P0354
100
4400
11000
A3
587
A5
596
Amber
CP41A-AHS-CM0P0354
100
5500
11000
A3
587
A5
596
Amber
CP41A-AHS-CM0P0454
100
5500
11000
A4
590
A5
596
Min.
Max.
Color
Bin
Min.
(nm)
Color
Bin
Max.
(nm)
4400
8730
RJ
620
RJ
630
Luminous Flux (mlm)
Dominant Wavelength
Luminous Flux (mlm)
Dominant Wavelength
Max.
Color
Bin
Min.
(nm)
Color
Bin
Max.
(nm)
4400
8730
RJ
620
RJ
630
5500
8730
RJ
620
RJ
630
Luminous Flux (mlm)
Dominant Wavelength
Min.
Max.
Color
Bin
40
4400
11000
A3
587
A5
596
40
4400
11000
A4
590
A5
596
Luminous Flux (mlm)
Min.
(nm)
Color
Bin
Max.
(nm)
Dominant Wavelength
Luminous Flux (mlm)
Dominant Wavelength
Notes:
1. The above kit numbers represent order codes which include multiple flux-bin and color-bin codes.
Only one flux-bin code and one color-bin code will be shipped on each reel.
And single flux-bin code,single color bin-codes will not be orderable.
2. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions.
3. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED
product safely.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
of Cree, Inc.
4
Cree P4 LED
CP41A-RDS/ADS
CP41A-RFS/RFS
CP41A-RHS/AHS
GRAPHS
(RELATIVE LUMINOUS FLUX)
IF (mA)
1.25
100.0
1.0
80.0
Red
0.75
60.0
Amber
40.0
0.5
20.0
0.25
0.0
VF(V)
2.0
2.2
2.4
2.6
2.8
3.0
-60
-50
-40
-30
-20
0.0
0
Amber
20
40
60
80
IF(mA)
100
FIG.2 RELATIVE LUMINOUS FLUX VS.
FORWARD CURRENT
FIG.1 FORWARD CURRENT VS.
FORWARD VOLTAGE.
Vr(V)
Red
(RELATIVE LUMINOUS INTENSITY)
-10
0
100%
-10
80%
-20
60%
-30
40%
-40
20%
Amber
-50
Ir(uA)
FIG.3 Red & Amber REVERSE CURRENT
VS. REVERSE VOLTAGE.
IF(mA)
100
0%
300
400
500
Red
600
700
WL(nm)
800
FIG.4 RELATIVE LUMINOUS INTENSITY VS.
WAVELENGTH.
CP41A-RDS/ADS 50% Power Angle : 40
(RELATIVE LUMINOUS INTENSITY)
0
1.0
80
60
0.5
40
20
Ta( C)
40
20
60
80
100
0
FIG.5 Red & Amber MAXIMUM FORWARD
DC CURRENT VS AMBIENT
TEMPERATURE (Tjmax=110 C)
0
0
-60
-90
-30
FIG.6 FAR FIELD PATTERN
0
30
60
Angle
90
The above data are collected from statistical figures that do not necessarily correspond to the actual
parameters of each single LED. Hence, these data will be changed without further notice.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
of Cree, Inc.
5
Cree P4 LED
CP41A-RDS/ADS
CP41A-RFS/RFS
CP41A-RHS/AHS
CP41A-RFS/AFS
CP41A-RHS/AHS
50% Power Angle : 70
50% Power Angle : 100
(RELATIVE LUMINOUS INTENSITY)
0
1.0
(RELATIVE LUMINOUS INTENSITY)
0
1.0
0.5
0.5
0
-60
-90
-30
FIG.7 FAR FIELD PATTERN
0
30
60
Angle
90
0
-90
-60
-30
FIG.8 FAR FIELD PATTERN
0
30
60
Angle
90
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
of Cree, Inc.
6
Cree P4 LED
CP41A-RDS/ADS
CP41A-RFS/RFS
CP41A-RHS/AHS
MECHANICAL DIMENSIONS
All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted.
An epoxy meniscus may extend about 1.5 mm down the leads.
Burr around bottom of epoxy may be 0.5 mm max.
CP41A-RDS/ADS:
CP41A-RFS/AFS:
NOTES
RoHS Compliance
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/
EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as
amended through April 21, 2006.
Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
of Cree, Inc.
7
Cree P4 LED
CP41A-RDS/ADS
CP41A-RFS/RFS
CP41A-RHS/AHS
MECHANICAL DIMENSIONS
All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted.
An epoxy meniscus may extend about 1.5 mm down the leads.
Burr around bottom of epoxy may be 0.5 mm max.
CP41A-RHS/AHS:
NOTES
RoHS Compliance
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/
EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as
amended through April 21, 2006.
Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
of Cree, Inc.
8
Cree P4 LED
CP41A-RDS/ADS
CP41A-RFS/RFS
CP41A-RHS/AHS
KIT NUMBER SYSTEM
All dimensions in mm.Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color,
forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to
the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options.
Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner:
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
of Cree, Inc.
9
Cree P4 LED
CP41A-RDS/ADS
CP41A-RFS/RFS
CP41A-RHS/AHS
PACKAGING
Features:
•
•
•
•
•
The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags.
Cardboard boxes will be used to protect the LEDs from mechanical shock during transportation.
The boxes are not water resistant, and they must be kept away from water and moisture.
The Tube Pack type of packaging.
Max 60 pcs per tube.
R
xxx xxx
R
C OL OR LED LAMP
T YPE
LXXXXXXXX-XXX
LOT
J OWAXXXXX -XX-XXX
QT Y
RANK
P CS
Iv
Vf
Hu e
X
XX
XX
AX XXX XXX XXX X
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright
© 2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
of Cree, Inc.
10
Similar pages