Surface Mount Bandpass Filter 50Ω CBP-1000F+ 900 to 1100 MHz The Big Deal • • • • High Q Good selectivity Low VSWR, 1.3:1 typical Miniature shielded package CASE STYLE: KV1710 Product Overview CBP-1000F+ is a coaxial-ceramic-resonator based bandpass filter in a shielded package fabricated using SMT technology. This filter has wider bandwidth and offers low insertion loss with high rejection, low VSWR and high power handling for use in L-band application. Key Features Feature Advantages High Q The CBP-1000F+ filter incorporates High-Q ceramic resonators that enables low insertion loss. Good selectivity This filter designed with six pole. So this providing good selectivity in the stopband performance. Low VSWR This filter maintains 1.3:1 typical VSWR over a passband frequency range. Rugged construction The CBP-1000F+ has been qualified over wide range of thermal, mechanical and environmental conditions including withstanding the stress of extensive solder reflow cycles. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 1 of 3 Surface Mount Bandpass Filter 50Ω CBP-1000F+ 900 to 1100 MHz CASE STYLE: KV1710 Features • • • • High Q Good selectivity Low VSWR, 1.3:1 typical Miniature shielded package Electrical Specifications at 25°C Parameter Center Frequency Insertion Loss VSWR Insertion Loss VSWR Insertion Loss VSWR Pass Band Applications Stop Band, Lower • L-band application • Aviation/Aeronautical • Cellular & Distance measurement equipment (DME) Stop Band, Upper Functional Schematic RF IN F# Frequency (MHz) Min. Typ. Max. Unit - 900-1100 900-1100 DC-790 DC-790 1260-1800 1260-1800 26 1000 0.9 1.3 35 20 36 20 1.6 1.8 MHz dB :1 dB :1 dB :1 F1-F2 F1-F2 DC-F3 DC-F3 F4-F5 F4-F5 28 - - Maximum Ratings Operating Temperature Storage Temperature RF Power Input -40°C to 85°C -55°C to 100°C 10 W max. Permanent damage may occur if any of these limits are exceeded. RF OUT Typical Performance Data at 25°C Frequency (MHz) Typical Frequency Response FREQUENCY (MHz) F3 F1 F2 F4 F5 INSERTION LOSS (dB) DC Insertion Loss (dB) VSWR (:1) Frequency (MHz) 1 108.05 331.62 900 7.35 100 106.29 365.83 910 6.82 250 104.95 291.42 920 6.42 400 84.91 181.76 930 6.10 750 54.96 58.47 940 5.86 790 36.76 45.36 950 5.67 802 30.73 39.50 960 5.49 820 20.61 27.12 970 5.35 848 3.12 2.48 980 5.22 850 2.47 1.95 1000 5.06 900 0.82 1.06 1010 5.01 1000 0.60 1.10 1020 4.99 1100 0.71 1.10 1030 5.00 1124 2.01 2.58 1040 5.03 1130 3.08 3.84 1050 5.09 1190 20.19 56.06 1060 5.16 1236 30.76 77.14 1070 5.27 1260 35.61 80.25 1080 5.45 1320 47.09 82.41 1090 5.79 1800 54.99 105.78 1100 6.39 CBP-1000F+ INSERTION LOSS (Full band) CBP-1000F+ INSERTION LOSS (Pass band) 0 INSERTION LOSS (dB) +RoHS Compliant INSERTION LOSS (dB) 0 The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Group Delay (nsec) 25 50 75 100 0 300 600 900 1200 FREQUENCY (MHz) 1500 4 0.7 12 1.0 16 20 1800 0.4 8 800 900 900 1100 1000 1100 FREQUENCY (MHz) 1200 CBP-1000F+ GROUP DELAY CBP-1000F+ VSWR 8 GROUP DELAY (ns) 1000 VSWR 100 1.60 1.10 10 0.60 1 1000 900 1000 7 6 5 1100 4 0 300 600 900 1200 FREQUENCY (MHz) 1500 1800 900 950 1000 1050 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] 1100 REV.OR M156113 CBP-1000F+ EDU2304 URJ 160524 Page 2 of 3 CBP-1000F+ Bandpass Filter Pad Connections Outline Drawing INPUT 1 OUTPUT GROUND INDEX 12 2,3,4,5,6,7,8,9,10,11,13,14,15,16,17 17 16 15 14 13 1 12 2 11 B 3 10 4 Demo Board MCL P/N: TB-693+ Suggested PCB Layout (PL-378) 5 6 7 8 METALLIZATION SOLDER RESIST 9 C A D 4 5 6 7 8 9 3 10 2 L PCB Land Pattern T E Z 11 1 12 K X G U V S R Y F 17 16 15 14 13 W Q P Suggested Layout, Tolerance to be within ±.002 M N H Outline Dimensions ( inch mm ) A 1.050 26.67 B .875 22.23 C .239 6.07 D .125 3.18 E .160 4.06 F .160 4.06 G .278 7.06 H .205 5.21 J .160 4.06 K .070 1.78 L .150 3.81 P 1.090 27.69 Q .870 22.10 R .915 23.24 S .625 15.88 T .710 18.03 U .695 17.65 V .870 22.10 W .390 9.91 X .110 2.79 Y .070 1.78 Z .458 11.63 M .090 2.29 N .130 3.30 Wt. grams 8.5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 3 of 3