CUSTOMER : NO : DATE : MODEL NAME : MODEL NO : SPECIFICATION PART NAME : FM MODULE PART NO : DA-201/DA-201(A) APPROVAL REFERENCE NO PLEASE RETURN ONE COPY FROM ( ) SETS WITH YOUR AUTHORIZED SIGNATURE AFTER COMPLETING YOUR APPROVALS (株) D & A Digital & Analog Corporation #305 Kyungki Venture Bldg, 1017, Inkye-Dong, Paldal-Gu Suwon City, Kyungki-Do, Korea E-mail : [email protected] Tel : 82-31-234-4812 Fax : 82-31-234-4817 SPECIFICATION PAGE FM STEREO TUNER MODULE : DA-201/201(A) 1 OF 5 1. Scope This specification applied to FM STEREO tuner Module. 2. General specification ITEM NO SPEC NOTE 1 Freguency Range 2 IF freguency 3 RF input inpedance 4 Suppy Veltage 5 Operating tamperture - 10 -55℃ 6 Humidity 85% MAX 7 Clock (X-TAL) 87.5(76) - 108 ㎒ 225 ㎑ Unbalance 40 Ω 3V MAIN : 32.768㎑ SUB:13㎒, 6.5㎒ 3. Ealectrical specification NO 1 ITEM Sensitivity (S/N 30㏈) Test condition SPEC MIN TYP MAX UNIT 90.0 ㎒ - 6 12 ㏈㎶ 98.0 ㎒ - 6 12 ㏈㎶ 106.0 ㎒ - 6 12 ㏈㎶ 2 S/N Ratio 40㎑, DEV 55 60 - ㏈ 3 Image rejection 87.5~108㎒ 25 30 - ㏈ 4 Stereo separation Δf 75㎑, fmod = 1㎑ 25 30 - ㏈ 5 Audio output Δf 22.5㎑, fmod = 1㎑ 80 6 T.H.D Δf 22.5㎑, fmod = 1㎑ 0.5 DATE 21 APL 2003 DESIGN D&A CORPORATION ㎷ 1.5 % CHECK APPROVAL SPECIFICATION PAGE FM STEREO TUNER MODULE : DA-201/201(A) 2 OF 5 4. Standard test condition NO ITEM MONO STEREO 1 Modulation Freguency 1㎑, 22.5㎑/dev VRF = 1㎷ 1㎑, 75㎑/dev including 10% pilot 2 Test Freguency 98㎒ 3 RF Input level 60㏈㎶ 5. DC Specification ITEM Test condition Supply Valtage SPEC MIN TYP MAX UNIT ON Station 2.5 3.0 5 V Supply Current ON Station 8.5 10 13 ㎃ Supply Current OFF Station 25 ㎂ 6. Demensions 1) UNIT : 13(L) x 12(W) x 1.8(H) mm + 0.2 mm 2) Packing : 283(L) x 150(W) x 15(H) mm (200 PCS) 3) M/CARTON : 312(L) x 166(W) x 55(H) mm (1,000 PCS) 7. Marking : STAMP 201 201(A) DATE 21 APL 2003 DESIGN D&A CORPORATION CHECK APPROVAL SPECIFICATION PAGE FM STEREO TUNER MODULE : DA-201/201(A) 3 OF 5 8. Electrical Interface Description Terminal NAME Inter face I/O 1 GND GND - 2 DATA Digital I/O 3 CLK Digital I Bus clock line Input. 4 READ/WRITE Digital I Read/write control input 5 BUSMODE Digital I Bus mode select input 6 BUSENABLE Digital I Bus enable input 7 X-TALIN Analog I Input crystal oscillator. 8 OUT-L Analog O Lch. Audio output. 9 OUT-R Analog O Rch. Audio output. 10 GND GND - 11 VCC Analog I 3V VCC Input line. 12 ANT Analog I RF Input line. Bus data line Input/output. ※ Need the PULL UP (47 ㏀) FOR DATA (2) line DATE 21 APL 2003 DESIGN D&A CORPORATION CHECK APPROVAL