GHIBLI ® AC/DC UNIVERSAL FAST CHARGER Rev. 01 PRODUCT VIEW FEATURES LINE VOLTAGE 90 - 264 VAC SINGLE OUTPUT MAX 8W DESIGNED FOR ON LINE CHARGING OF MOBILE PHONES EMC COMPLIANCE ACCORDING TO EU AND US DIRECTIVES SAFETY EN60950 APPROVAL ACCORDING TO CE AND UL MARKED. AUSTRALIA, UK, SOUTH AFRICA AND CHINA MARKING UPON REQUEST (Ghibli Housing with RG11) ORDERING NUMBER: GSAC-xxCCCy OUTPUT CURRENT AND VOLTAGE LEVELS ACCORDING TO CUSTOMER REQUIREMENTS OUTPUT VOLTAGE PRECISION: +/- 5% OUTPUT CURRENT PRECISION : +/- 8% Plug Type: Part Number: EURO GSAC-xxCCC1 xx = Output Current level (2 Digits) CCC= Customer Identifier (3 Digits) y = plug type OUTPUT RIPPLE VOLTAGE <100 mVpp INPUT FUSE PROTECTION OUTPUT SHORT CIRCUIT PROTECTION RG11 OUTPUT CONNECTOR ONLY WITH EURO PLUG. 2-WIRES DC CORD WITH STRAIN RELIEF TERMINATED WITH ANY CUSTOM CONNECTOR AVAILABLE UPON REQUEST. A VARIETY OF PLUGS CAN BE ASSEMBLED ON THIS VERSION. DESCRIPTION The Fast Charger GHIBLI has been designed for charging all types of batteries, including NiMH, NiCd and Li-Ion batteries in hand held mobile phones. GHIBLI is a high performance high efficiency AC/DC switching mode constant voltage & current generator. The output voltage and current levels are set up by design in accordance with customer requirements. Typical reference values in this data sheet are 10V, 800 mA with the input Vac ranging from 90 to 264 Vrms. LOW STAND BY POWER January 2000 1/4 GHIBLI Coming into the small Ghibli housing, this fast charger is equipped with the European AC plug. Interface to the phone is ensured via a RG11 connector. However, the same electronic platform can be assembled upon customer request into the Robin housing. The Robin housing can be assembled with a variety of AC plug (UK, US, Australia, South Africa/India,and China), interface to the phone is ensured via a 2 wires cord with strain relief, terminated with customer specified connector. Typical weight is 70 grams only, without cable. AGENCY Approvals The charger is certified by competent agencies to comply with most popular safety and EMC requirements, including but not limited to: EN60950 UL1950 ETS300-342-1 FCC part 15 (specific version upon request) ELECTRICAL CHARACTERISTICS (Tamb=25oC, unless otherwise specified.) Symbol Parameter Test Condition Min. Typ. 90 Max. 264 Unit Vi Input Voltage Vo Output Voltage limit No load 9.5 10.0 10.5 V Io Output Current limit 1<Vout<Vo limit 740 800 860 mA Vor Output Ripple Io=Ilimit 100 mVpp Vis Isolation voltage Input to (EN60950) Top Operating Temperature Tstg Storage Temperature Range Vbatt=4V output, Ambient t=60s 3000 Vrms 0 50 o C -20 70 o C TYPICAL OUTPUT CHARACTERISTIC Vo (V) 10 800 2/4 Vrms Io (mA) GHIBLI MECHANICAL DATA EURO plug version (dimensions in mm), GHIBLI Housing MECHANICAL DATA UK plug version (dimensions in mm) ROBIN Housing DC CORD only 3/4 GHIBLI MECHANICAL DATA US plug version (dimensions in mm) ROBIN Housing DC CORD only Fast Chargers SELECTION chart PARAMETER GHIBLI MISTRAL JOSEPH INPUT VOLTAGE RANGE - Vrms 90 - 264 90 - 264 90 - 264 MAX OUTPUT POWER - Watt 8 8 4 OUTPUT VOLTAGE ACCURACY +/- 5% +/- 5% +/- 10% OUTPUT CURRENT ACCURACY +/- 8% +/- 12% +/- 20% OUTPUT VOLTAGE RIPPLE - mVpp < 100 < 100 < 100 > 3000 > 3000 > 3000 OPERATING AMBIENT TEMPERATURE - C 0 - 50 0 - 50 0 - 50 STORAGE TEMPERATURE RANGE - oC -20 +70 -20 +70 -20 +70 AC INPUT FUSE PROTECTION YES YES YES DC OUTPUT SHORT CIRCUIT PROTECTION YES YES YES WEIGHT (without cable) - Grams 70 70 70 ISOLATION VOLTAGE- Vrms o Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specification mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics © 2000 STMicroelectronics – Printed in Italy – All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A. http://www.st.com 4/4