Agilent HLMP-CWxx T-1 ¾ (5mm) Extra Bright Precision Optical Performance White LED Lamps Data Sheet Features • Well defined spatial radiation pattern HLMP-CW11, HLMP-CW12, HLMP-CW26, HLMP-CW27, HLMP-CW36, HLMP-CW37 • Viewing angle: 15°°, 23°° and 30°° • Standoff or non-standoff leads • Superior resistance to moisture Description These high intensity white LED lamps are based on InGaN material technology. A blue LED die is coated by phosphor to produce white. The typical resulting color is described by the coordinates x = 0.31, y = 0.31 using the 1931 CIE Chromaticity Diagram. • High luminous white emission These T-1 ¾ lamps are untinted, non-diffused, and incorporate precise optics which produce well-defined spatial radiation patterns at specific viewing cone angle. Applications • Electronic signs and signals • Small area illumination • Legend backlighting • General purpose indicators Benefit • Reduced power consumption, higher reliability, and increased optical/mechanical design flexibility compared to incandescent bulbs and other alternative white light sources. Caution: Devices are Class 1 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Application Note AN-1142 for additional details. Package Dimensions Package Dimension A Package Dimension B 5.00 ± 0.20 (0.197 ± 0.008) 8.71 ± 0.20 (0.343 ± 0.008) 5.00 ± 0.20 (0.197 ± 0.008) 1.14 ± 0.20 (0.045 ± 0.008) DIMENSION H 8.71 ± 0.20 (0.343 ± 0.008) 2.35 (0.093) MAX. 1.14 ± 0.20 (0.045 ± 0.008) 0.70 (0.028) MAX. 31.60 MIN. (1.244) 0.70 (0.028) MAX. CATHODE LEAD 1.00 MIN. (0.039) 1.50 ± 0.15 (0.059 ± 0.006) 31.60 MIN. (1.244) DIMENSION H: 15°: 12.24 ± 0.25mm (0.482 ± 0.01 inches) 23°: 12.50 ± 0.25mm (0.492 ± 0.01 inches) 30°: 12.00 ± 0.25mm (0.472 ± 0.01 inches) CATHODE LEAD 0.50 ± 0.10 SQ. TYP. (0.020 ± 0.004) 1.00 MIN. (0.039) 0.50 ± 0.10 SQ. TYP. (0.020 ± 0.004) 5.80 ± 0.20 (0.228 ± 0.008) CATHODE FLAT 2.54 ± 0.38 (0.100 ± 0.015) 5.80 ± 0.20 (0.228 ± 0.008) CATHODE FLAT 2.54 ± 0.38 (0.100 ± 0.015) Part Numbering System H L M P - CW XX - X X X XX Mechanical Option 00: Bulk DD: Ammo Pack Straight Leads Color Bin Options 0: Full color bin distribution B: Color bin 2 & 3 only Maximum Intensity Bin 0: No maximum intensity bin limit Others: Refer to Device Selection Guide Minimum Intensity Bin Refer to Device Selection Guide Viewing Angle and Standoff Option 11: 15˚ without standoff 12: 15˚ with standoff 26: 23˚ without standoff 27: 23˚ with standoff 36: 30˚ without standoff 37: 30˚ with standoff 2 Notes: 1. All dimensions are in millimeters /inches. 2. Epoxy meniscus may extend about 1mm (0.040") down the leads. 3. If heat-sinking application is required, the terminal for heat sink is anode. Device Selection Guide Intensity (mcd) at 20 mA Part Number Typical Viewing Angle, 2θ ½ (Degree) Min. Max. Standoff Package Dimension HLMP-CW11-WZ0xx 15 5500 16000 No A HLMP-CW11-XY0xx 15 7200 12000 No A HLMP-CW12-WZ0xx 15 5500 16000 Yes B HLMP-CW12-XY0xx 15 7200 12000 Yes B HLMP-CW12-XYBxx 15 7200 12000 Yes B HLMP-CW26-UX0xx 23 3200 9300 No A HLMP-CW26-VW0xx 23 4200 7200 No A HLMP-CW27-UX0xx 23 3200 9300 Yes B HLMP-CW27-UX2xx 23 3200 9300 Yes B HLMP-CW27-VW0xx 23 4200 7200 Yes B HLMP-CW36-TW0xx 30 2500 7200 No A HLMP-CW36-UV0xx 30 3200 5500 No A HLMP-CW36-UVBxx 30 3200 5500 No A HLMP-CW37-TW0xx 30 2500 7200 Yes B HLMP-CW37-UV0xx 30 3200 5500 Yes B HLMP-CW37-UVBxx 30 3200 5500 Yes B Notes: 1. Tolerance for luminous intensity measurement is +/- 15% 2. The luminous intensity is measured on the mechanical axis of the lamp package. 3. The optical axis is closely aligned with the package mechanical axis. 4. LED light output is bright enough to cause injuries to the eyes. Precautions must be taken to prevent looking directly at the LED without proper safety equipment. 5. 2θ1/2 is the off-axis angle where the luminous intensity is ½ the on axis intensity Absolute Maximum Rating at TA = 25oC Parameters Value Unit 30 mA 100 mA Power dissipation 105 mW LED junction temperature 110 o C Operating temperature range -40 to +85 o C Storage temperature range -40 to +100 o C 250 for 3 seconds o C 260 for 5 seconds o C DC forward current [1] Peak pulsed forward current Wave soldering temperature Solder Dipping temperature [3] [2] [2] Notes: 1. Derate linearly as shown in figure 2. 2. 1.59 mm (0.060 inch) below body 3. Duty factor 10%, frequency 1KHz 3 Electrical/Optical Characteristics TA = 25oC Parameters Symbol Forward voltage Reverse Voltage Min VF [1] VR Thermal resistance Chromaticity Coordinates [2] Capacitance Typ Max Units Test Condition 3.2 4.0 V IF = 20 mA V IR = 10 µA o LED Junction to anode lead 5.0 RθJ-PIN 240 X Y 0.31 0.31 IF = 20 mA C 70 VF=0, f=1MHz C/W Notes: 1. The reverse voltage of the product is equivalent to the forward voltage of the protective chip at IR = 10 µA 2. The chromaticity coordinates are derived from the CIE 1931 Chromaticity Diagram and represent the perceived color of the device. 35 0.8 0.6 0.4 0.2 0.0 380 480 580 680 30 RθJ-A = 585˚C/W 25 RθJ-A = 780˚C/W 20 15 10 5 0 780 0 WAVELENGTH - nm Figure 1. Relative Intensity vs. Wavelength 30 1mA 0.015 IF - FORWARD CURRENT - mA 0.020 Y-COORDINATES 100 20 40 60 80 AMBIENT TEMPERATURE - ˚C Figure 2. Forward Current vs. Ambient Temperature 0.025 5mA 0.010 10mA 0.005 0.000 20mA -0.005 -0.010 -0.005 1.5 30mA 0.000 0.005 0.010 0.015 X-COORDINATES Figure 4. Chromaticity shift vs. Current *Note: (x,y) values @ 20mA reference to (0,0) 25 20 15 10 5 0 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 VF - FORWARD VOLTAGE - VOLTS Figure 5. Forward Current vs. Forward Voltage RELATIVE LUMINOUS INTENSITY IF - FORWARD CURRENT - mA RELATIVE LUMINOUS INTENSITY 1.0 1.2 0.9 0.6 0.3 0 0 10 20 FORWARD CURRENT - mA Figure 3. Relative Intensity versus DC Forward Current 30 RELATIVE LUMINOUS INTENSITY Intensity Bin Limit Table 1 Bin 0.5 0 -90 -60 -30 0 30 ANGULAR DISPLACEMENT (˚) 60 90 Figure 6. Spatial Radiation Pattern for CW1x RELATIVE LUMINOUS INTENSITY 1 Min Max Q 1150 1500 R 1500 1900 S 1900 2500 T 2500 3200 U 3200 4200 V 4200 5500 W 5500 7200 X 7200 9300 Y 9300 12000 Z 12000 16000 1 16000 21000 Tolerance for each bin limit is ± 15% 0.5 0 -90 -60 -30 0 30 ANGULAR DISPLACEMENT (˚) 60 90 Figure 7. Spatial Radiation Pattern for CW2x 1 RELATIVE LUMINOUS INTENSITY Intensity (mcd) at 20 mA 0.5 0 -90 -60 -30 0 30 ANGULAR DISPLACEMENT (˚) Figure 8. Spatial Radiation Pattern for CW3x 60 90 Color Bin Limit Table Color Bin Limits with Respect to CIE 1931 Chromaticity Diagram Rank Limits (Chromaticity Coordinates) 1 X 0.330 0.330 0.356 0.361 Y 0.360 0.318 0.351 0.385 X 0.287 0.296 0.330 0.330 Y 0.295 0.276 0.318 0.339 X 0.264 0.280 0.296 0.283 3 0.35 Y-COORDINATE 2 0.40 4 1 2 0.30 BLACK BODY CURVE 3 0.25 4 Y 0.267 0.248 0.276 0.305 X 0.283 0.287 0.330 0.330 Y 0.305 0.295 0.339 0.360 Tolerance for each bin limit is ± 0.01 Note: 1. Bin categories are established for classification of products. Products may not be available in all bin categories. Please contact your Agilent representative for information on currently available bins. www.agilent.com/ semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (408) 654-8675 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright © 2004-2005 Agilent Technologies, Inc. Obsoletes 5989-3101EN July 18, 2005 5989-3532EN 0.20 0.26 0.30 0.34 X-COORDINATE 0.38