EC2–12 F-214 EHT–120–01–F–D–SM–LC EHT–112–01–L–D (2,00 mm) .0787" EHT, EC2 SERIES SHROUDED IDC EJECTOR HEADER SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?EHT Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Sn or Au over 50µ" (1,27 µm) Ni Operating Temp Range: -55°C to +125°C RoHS Compliant: Yes Mates with: TCSD EJECTOR HEADER CAP Ejector latches (Locks TCSD cable to EHT header) (9,65) .380 (9,65) .380 No. of positions x (2,00) .0787 + (19,89) .783 Processing: Lead–Free Solderable: Yes SMT Lead Coplanarity: (0,10 mm) .004" max Ten standard sizes mate with common 2 mm IDC cable assemblies EC2 NO. PINS PER ROW RECOGNITIONS Straight through-hole, right angle, or surface mount 05, 08, 10, 12, 13, 15, 17, 20, 22, 25 For complete scope of recognitions see www.samtec.com/quality EHT 1 NO. PINS PER ROW PLATING OPTION 01 TAIL OPTION D ALSO AVAILABLE (MOQ Required) 05, 08, 10, 12, 13, 15, 17, 20, 22, 25 • Other platings Contact Samtec. = Gold flash on post, Matte Tin on tail (15,07) .593 –SM = Surface Mount (2,54) .100 01 (0,51) .020 (0,50) .020 SQ (8,58) .338 –P = Pick & Place Pad (–SM only) (3,05) .120 –TR (2,90) .114 (2,00) .0787 –SR –RA Note: Some lengths, styles and options are non-standard, non-returnable. (Latch removed for clarity) WWW.SAMTEC.COM –K = (6,50 mm) .256" DIA Polyimide Film Pick & Place Pad (–SM only) –P (3,05) .120 (12,19) .480 (9,40) .370 (8,89) .350 –SM –LC = Locking Clip (–SM only) (Manual placement required) (8,26) .325 (9,53) x .375 (6,02) .237 (7,62) .300 (2,00) .0787 –SR = Strain Relief (Leave Blank for no strain relief) = Right Angle = 10µ" (0,25 µm) Gold on post, Matte Tin on tail (4,51) .178 = Polarized Position –RA –L No. of positions x (2,00) .0787 + (13,79) .543 (2,00) .0787 02 –“XX” Leave blank for Through-hole –F OTHER OPTION (1,52) .060 = Tape & Reel (–SM only)