DOMINANT DWO-MJS-W2X-1 Power domiled Datasheet

DOMINANT
Opto Technologies
Innovating Illumination
TM
DATA SHEET:
Power DomiLED
AlInGaP : DWx-MJS
Power DomiLED
With its significant power in terms brightness, viewing angle and variety
of application possibilities, Power DomiLED truly is a standout performer!
Ideal for automotive interior lighting as well as home, office and industrial
applications, it is also a proven performer in electronic signs and signals.
Features:
>
>
>
>
>
>
>
High brightness surface mount LED using thin film technology.
120° viewing angle.
Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm.
Qualified according to JEDEC moisture sensitivity Level 2.
Compatible to IR reflow soldering.
Environmental friendly; RoHS compliance.
Passed Corrosion Resistant Test. Appx. 4.1
Applications:
> Automotive:
Interior applications, eg: switches, telematics, climate control system,
dashboard, etc.
Exterior applications, eg: signal lighting, Center High Mounted Stop Light
(CHMSL)
> Signage: full colour display video notice board, signage, special effect
lighting.
> Industrial: white goods (eg: Oven, microwave, etc.), light bar, illuminated
advertising.
> Lighting: architecture lighting, general lighting, garden light, channel light.
© 2005 DomiLED is a trademark of DOMINANT Opto Technologies.
All rights reserved. Product specifications are subject to change without notice.
1
03/07/2017 V13.0
DOMINANT
TM
AlInGaP : DWx-MJS
Opto Technologies
Innovating Illumination
Optical Characteristics at Tj=25˚C
Part Ordering
Number
Color
Luminous Intensity @ IF = 50mA IV (mcd) Appx. 1.1
Min.
Typ.
Max.
DWS-MJS-WX1-1
Super Red, 632nm
120
1125.0
1800.0
2240.0
DWR-MJS-W2X-1
Red, 625nm
120
1400.0
2240.0
2850.0
DWA-MJS-W2X-1
Amber, 615nm
120
1400.0
2240.0
2850.0
DWO-MJS-W2X-1
Orange, 605nm
120
1400.0
2240.0
2850.0
DWO-MJS-XY2-1
Orange, 605nm
120
1800.0
2850.0
4500.0
DWY-MJS-W2X-1
Yellow, 587nm
120
1400.0
2240.0
2850.0
DWY-MJS-WX1-1
Yellow, 587nm
120
1125.0
1800.0
2240.0
Viewing
Angle˚
Electrical Characteristics at Tj=25˚C
Part Number
DWx-MJS
Vf @ If = 50mA Appx. 3.1
Min. (V)
2.00
Vr @ Ir = 10uA
Typ. (V)
Max. (V)
2.20
2.65
Min. (V)
12
Absolute Maximum Ratings
Maximum Value
Unit
DC forward current
70
mA
Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.1)
100
mA
Reverse voltage
12
V
ESD threshold (HBM)
2000
V
LED junction temperature
125
˚C
Operating temperature
-40 … +100
˚C
Storage temperature
-40 … +100
˚C
200
mW
300
K/W
130
K/W
Power dissipation (at room temperature)
Thermal resistance
- Junction / ambient, Rth JA
- Junction / solder point, Rth JS
(Mounting on FR4 PCB, pad size >= 16 mm2 per pad)
2
03/07/2017 V13.0
DOMINANT
TM
AlInGaP : DWx-MJS
Opto Technologies
Innovating Illumination
Wavelength Grouping at Tj= 25˚C
Color
Group
Wavelength distribution (nm) Appx. 2.2
DWS; Super Red
Full
625 - 640
DWR; Red
Full
620 - 630
DWA; Amber
Full
610 - 621
W
610 - 615
X
615 - 621
Full
600 - 612
W
600 - 603
X
603 - 606
Y
606 - 609
Z
609 - 612
Full
582 - 594
W
582 - 585
X
585 - 588
Y
588 - 591
Z
591 - 594
DWO; Orange
DWY; Yellow
3
03/07/2017 V13.0
DOMINANT
TM
AlInGaP : DWx-MJS
Opto Technologies
Innovating Illumination
Luminous Intensity Group at Tj=25˚C
Luminous Intensity Appx. 1.1
IV (mcd)
Brightness Group
W1
1125.0...1400.0
W2
1400.0...1800.0
X1
1800.0...2240.0
X2
2240.0...2850.0
Y1
2850.0...3550.0
Y2
3550.0...4500.0
Vf Bining (Optional) at Tj= 25˚C
Vf @ If = 50mA
Forward Voltage (V) Appx. 3.1
V5A
2.05 ... 2.20
V5B
2.20 ... 2.35
V5C
2.35 ... 2.50
V5D
2.50 ... 2.65
Please consult sales and marketing for special part number to incorporate Vf binning.
4
03/07/2017 V13.0
DOMINANT
TM
AlInGaP : DWx-MJS
Opto Technologies
Innovating Illumination
Relative Luminous Intensity Vs Forward Current
Relative
Luminous
IntensityCurrent
Vs Forward Current
Relative Luminous
Intensity
Vs Forward
IV/IVIV(50mA)
f(I
);Tj Tj
==25°C
f(IF); Tj = 25°C
/IV(50mA) =
= If(I
);F(50mA)
= 25°C
V/I
FV
Forward Current Vs Forward Voltage
Relative
Vs Intensity
Forward Current
RelativeIntensity
Luminous
Vs Forward Current
1.4Luminous
70
IV/IV(50mA) =IVf(I/IFV);(50mA)
Tj = 25°C
= f(IF); Tj = 25°C
1.4
1.4
70
Luminous Intensity Vs Forward Current
1.2 Relative1.2
60
IV/IV(50mA) = f(IF); Tj = 25°C
1.2
1.2
1.4
60
70
1.0
1.0
50
0.4
0.6
0.2
0.2
0.4
0.0
0.0
0.2
0.0
90
0
0
0
90
80
0.4
0.2
0.2
0.0
0 20 1030 2040 3050 4060 5070
10
0.0
(mA)
10 0Forward
20Forward
40 IFIF30
50
10 30Current
20Forward
40 60
50 70
Current
IF (mA)
Current
(mA)
Maximum
Current
Vs Temperature
Maximum
Current
VsForward
Temperature
Forward
Current
IF (mA)
Current
IF (mA)
IF =50f (T) 60
IF = f (T)Vs
10
20 Current
30
40 Temperature
70
Maximum
Maximum
Current
Vs
Temperature
Maximum
Current
Vs
Temperature
90
I
=
f
(T)
I
=
f
(T)
I
=f(T)
F
F
ForwardFCurrent IF (mA)
90
80
Maximum
Current Vs Temperature
IF = f (T)
Ts
80
70
40
50
30
30
40
20
20
30
10
1.0
1.8
1.0
0.9
Ts
Ts
30
20
10
0
1.91.8
0
1.9
1.8
70
1.8
0
10
70
1.8
0
40
30
20
10
10
20
0
100
100
10
10
10
0.1
0.1
Relative
Luminous
Intensity
Irel Irel
Relative
Luminous
Intensity
Forward
Current
IF (mA)
Forward
Current
IF (mA)
Allowable
Forward
Current
IF( mA
Allowable
Forward
Current
IF( )mA )
100
Relative
Luminous
RelativeRelative
Luminous
Intensity
IrelIntensity
Luminous
Intensity
Irel Irel
F
Forward Current IF (mA)
Forward
Current
IF (mA)
Forward
Current
IF (mA)
Ts
Allowable Forward Current IF( mA )
Allowable
Forward
Current
IF( )mA )
Allowable
Forward
Current
IF( mA
Allowable Forward Current IF( mA )
60
60
50
40
2.01.9
2.32.2
2.3
(V)2.32.2
Forward
(V)Voltage
Forward
Voltage
2.0
2.1
2.2
1.9 Forward
2.0VFVoltage
2.1 VV
F F (V)
2.12.0
2.22.1
2.3
Forward
Voltage
VSpectral
Forward
Voltage
VF (V)
Relative
Emission
Relative
Spectral
Emission
F (V)
Relative
Irel = f(λ);
IF = 50mA
Tj = 25°C;
IFSpectral
=T50mA
j = 25°C;
1.9 Irel = f(λ);2.0
2.1
2.2Emission
2.3
Emission
Relative
Spectral Emission
1.0 RelativeI Spectral
f(λ);
TF j=T=V50mA
25°C;
IF= =50mA
50mA
Irel = f(λ);
Tj =
= I25°C;
I
=
f(λ);
=
25°C;
I
rel
(V)
Forward
Voltage
rel
j F
F
1.0
0.9 Amber
Amber
Relative Spectral
EmissionSuper Red Super Red
0.9
0.8 Irel = f(λ); Tj = 25°C; IF = 50mA
0.9
0.8
Amber
Amber
1.0
Super Red Super Red
Orange
Orange
0.8
0.8
0.7
0.7
70
70
60
60
0.9
Orange
80
Amber Orange
Ta
Ta
Super Red
0.7
0.7
0.6
0.6
T
60
60
s
0.8
50
50
70
Ta
Ta
0.6
0.6
0.5 Orange
0.5
50
50
0.7
Red
Red
Yellow
Yellow
40
40
60
0.5
0.5
0.4
Ta
0.4
Red
Red
Yellow
Yellow
0.6
40
40
30
30
50
0.4
0.4
0.3
0.3
0.5
30
30
Red
Yellow
20
20
40
0.3
0.3
0.2
0.2
0.4
20
20 Temperature
Ta = Ambient Temperature
Ta = Ambient
0.2
10
0.2
10
30
0.1
0.1
0.3
= Solder Point Temperature
Ts = Solder PointTsTemperature
Ta = Ambient
Ta = Ambient Temperature
10
10 Temperature
0.1
0.1
0
0.0
0.0
200
T = Solder Point
Solder Point Temperature
T =Temperature
350500
400550
450600
500650
550700
600750
650800
700850
750 800 850
350 400 450
0 s10 20 030 s 1040 2050 3060 4070 5080 6090 70
100 80
110 90 1000.2110
0
0.0
0
0.0
Ambient Temperature
10 0 Ta =10
Temperature
T(°C)
λ (nm)
λWavelength
(nm)
20 0 30 10Temperature
40 2050 3060 40
70 5080 6090T(°C)
350 400 450
550
700
800
350 500
400Wavelength
450 600
500 650
550
600 750
650
700 850
750 800 850
701008011090 1000.1110
Ts = Solder Point Temperature
Temperature
T(°C)
Temperature
T(°C)
Wavelength λ
(nm)
Wavelength
λ (nm)
Allowable
Forward
Current
Vs Duty Ratio 0.0
Allowable Forward
Current
Vs Duty
Ratio
Temperature
T(°C)
0
Wavelength λ (nm)
(
T
=
25°C;
t
≤
10μs
) 110
(
T
=
25°C;
t
≤
10μs
)
j
p
j
p
350 400 450 500 550 600 650 700 750 800 850
0
10 20 30 40 50 60 70 80 90 100
Allowable
Forward
Current
Vs Duty
Ratio
Allowable
Forward
Current
Vs Duty Ratio
1000
1000
Temperature
T(°C)
(T
) tp ≤ 10μs )
Wavelength λ (nm)
j = 25°C; tp (≤T10μs
j = 25°C;
Allowable
1000
1000 Forward Current Vs Duty Ratio
Radiation Pattern
Allowable Forward Current Vs Duty Ratio
( T( jT==25°C;
t ≤ 10μs)
25°C; tp ≤p 10μs )
j
30°
20°
10°
0°
1000
80
70
90
Forward Current I (mA)
0.6
0.4
Forward Current IF (mA)
0.6
0.8
0.4
0.8
0.6
50
60
40
Forward
Current
IF IF
Forward
Current
0.8
1.0
0.6
1.0
0.8
Relative Luminous Intensity Irel
1.0
1.2
0.8
Forward
Forward
Current
IF Current
Forward
Current
IF IF
Relative
Luminous
Intensity
Irel Irel
Relative
Luminous
Intensity
Relative Luminous Intensity Irel
Relative
Luminous
Intensity
Relative
Luminous
Intensity
Irel Irel
Relative Luminous Intensity Irel
1.4
Forward
CurrentVoltage
Vs Forward Voltage
Forward Current
Vs Forward
); T = 25°C
I25°C
IF = f(VFI);F T=j =f(V
F =Ff(VF);j Tj = 25°C
Forward Current
Vs Forward
Forward
Current Voltage
Vs Forward Voltage
70
IF = f(VF); Tj =IF25°C
= f(VF); Tj = 25°C
70
Forward Current Vs Forward Voltage
60
IF = f(VF); Tj = 25°C
60
50
1.0
40°
100
100
10
10
0.1
1
1
0.1
1 Duty Ratio,1%Duty
10 Ratio, % 10
10
10 100
100
100
100
Duty Ratio, %
Duty Ratio, %
0.1
1
10
50°
0.6
60°
0.4
70°
0.2
80°
90°
100
0.8
0
Duty
Duty Ratio,
Ratio, %%
5
03/07/2017 V13.0
DOMINANT
TM
AlInGaP : DWx-MJS
Opto Technologies
Innovating Illumination
Relative
Luminous
Intensity
Vs Junction
Temperature
Relative
Luminous
Intensity
Vs Junction
Temperature
Relative
Luminous
Intensity
Vs Junction
Temperature
(25°C)
==f(Tf(T
IV);
= I50mA
IVI/IV /IVV(25°C)
=
50mA
j); =
f(T
);
I
=
50mA
IV /IV (25°C)
j
jF V
2.0
2.0
0.4
0.4
1.8
1.8
0.3
0.3
0.2
0.2
0.1
0.1
0.0
0.0
-0.1
-0.1
-0.2
-0.2
YellowYellow
Orange
OrangeAmber
Amber
Red Red
Super Super
Red Red
-0.3
-0.3
-0.4
-0.4
-0.5
-0.5
-50 -30
-50
-10
10
30
50
70
90
-30 -10
10
30
50
70 110
90
Junction
Temperature
T j(°C)
Junction
Temperature
T (°C)
Junction
Temperature
T (°C)
j
130
110
1.6
1.4
1.4
1.2
1.2
1.0
1.0
0.8
0.8
0.6
0.6
0.4
0.4
0.2
0.2
0.0
0.0
-50 -30
-50
Red Red
Super Super
Red Red
Orange
Orange
YellowYellow
AmberAmber
-10
10
30
50
70
90
-30 -10
10
30
50
70 110
90
Junction
Temperature
T j(°C) T (°C)
Junction
Temperature
130
110
130
Junction Temperature jTj(°C)
j
Chromaticity Coordinate Shift Vs Junction Temperature
∆Cx, ∆Cy = f(Tj); IF = 50mA
10.0
0.030
8.0
0.025
0.020
6.0
0.015
4.0
0.010
Red
0.0
Amber
Super Red
-2.0
-4.0
-50
-30
-10
10
∆Cy
-0.010
-0.020
Yellow
-8.0
0.000
-0.005
-0.015
Orange
-6.0
∆Cx
0.005
∆Cx, ∆Cy
2.0
-10.0
1.6
130
Relative
Wavelength
VsJunction
Junction
Temperature
Relative
Wavelength Vs
Temperature
= λdom-- λdom
λdom (25°C)
= f(Tj);=IF f(Tj);
= 50mA
∆λdom∆λ=dom
λdom
(25°C)
IF =50mA
Relative Wavelength
∆λdom
(nm)
∆λdom(nm)
Wavelength
Relative
Intensity
Luminous
Relative
Relative
Luminous Intensity
IrelIrel
0.5
Relative Luminous Intensity Irel
0.5
Relative Forward Voltage ∆VF (V)
RelativeForward
Forward Voltage
∆V∆V
F (V) (V)
Voltage
Relative
F
Relative
Forward
Voltage
Junction
Temperature
Relative
Forward
Voltage
VsVs
Junction
Temperature
Relative
Forward
Voltage
Vs Junction
Temperature
V
V
(25°C)
= f(T
IFf(T
=);50mA
∆V∆V
=
V
(25°C)
=
f(T
I
=50mA
F=
F-- V
FV
j);
∆V
=
V
(25°C)
=
);
I
=
50mA
F
F
F
j
F
F
F
F
j
F
-0.025
30
50
70
90
110
130
-0.030
-50
-30
-10
10
30
50
70
90
110
130
Junction Temperature T j(°C)
Junction
Temperature TTj(°C)
Junction
Temperature
(°C)
j
6
03/07/2017 V13.0
AlInGaP : DWx-MJS
Opto Technologies
Innovating Illumination TM
DOMINANT
AlInGaP : DWx-MJS
Opto Technologies
DomiLED
• AllnGaP : DWx-MJS Package Outlines
Innovating
Illumination
TM
Power DomiLED • AllnGaP : DWx-MJS Package Outlines
Note :: Primary
Primary thermal
thermal path
path is
is through
throughAnode
Anode lead
lead of
of LED
LED package.
package.
Note
Material
Material
Material
Lead-frame
Cu Alloy
With Ag Plating
Material
Package
Lead-frame
High Temperature
Resistant
Plastic, PPA
Cu Alloy With
Ag Plating
Encapsulant
Package
High TemperatureEpoxy
Resistant Plastic, PPA
Soldering Leads
Encapsulant
Sn-Sn
Plating
Epoxy
Soldering Leads
Sn-Sn Plating
7
7
04/11/2016 V12.0
03/07/2017 V13.0
DOMINANT
DOMINANT
Opto Technologies
TM
TM
AlInGaP : DWx-MJS
AlInGaP : DWx-MKG
Opto
Technologies
Innovating
Illumination
Innovating Illumination
Recommended Solder Pad
Recommended Solder Pad
8
8
03/07/2017 V13.0
31/10/2016 V1.0
DOMINANT
DOMINANT
DOMINANT
Opto Technologies
TM
TM
TM
AlInGaP::DWx-MJS
DWx-MJS
AlInGaP
AlInGaP
: DWx-MJS
OptoTechnologies
Technologies
Opto
Innovating Illumination
Innovating
Illumination
Innovating
Illumination
Tapingand
andorientation
orientation
Taping
Taping
and orientation
•
•
Reelscome
come inquantity
quantityofof2000
2000units.
units.
• •Reels
Reels
come ininquantity
of 2000 units.
•
Reel
diameter
is
180
mm.
• Reel
Reeldiameter
diameterisis180
180mm.
mm.
9 9
9
04/11/2016 V12.0
03/07/2017 V13.0
04/11/2016 V12.0
DOMINANT
TM
AlInGaP : DWx-MJS
Opto Technologies
Innovating Illumination
Packaging Specification
10
03/07/2017 V13.0
DOMINANT
TM
AlInGaP : DWx-MJS
Opto Technologies
Innovating Illumination
Packaging Specification
Moisture sensitivity level
Barcode label
DOMINANT Opto Technologies
(L) Lot No : lotno
ML TEMP
2 260˚C
RoHS Compliant
(P) Part No : partno
(C) Cust No : partno
(Q) Quantity : quantity
(G) Grouping : group
(D) D/C : date code
Made in Malaysia
(S) S/N : serial no
Reel
Moisture absorbent material +
Moisture indicator
Label
The reel, moisture absorbent material and moisture indicator are
sealed inside the moisture proof foil bag
Weight
Weight(gram)
(gram)
Average 1pc Power DomiLED
1 completed bag (2000pcs)
0.034
0.034
240 ± 10
190
10
Cardboard
Box
DOMINANT TM
For Power DomiLED
Cardboard Box
Size
Dimensions (mm)
Empty Box
Weight (kg)
Reel / Box
Super Small
325 x 225 x 190
0.38
9 reels MAX
Small
325 x 225 x 280
0.54
15 reels MAX
Medium
570 x 440 x 230
1.46
60 reels MAX
Large
570 x 440 x 460
1.92
120 reels MAX
11
03/07/2017 V13.0
DOMINANT
TM
AlInGaP : DWx-MJS
Opto Technologies
Innovating Illumination
Recommended Pb-free Soldering Profile
Classification Reflow Profile (JEDEC J-STD-020C)
300
255-260˚C
10-30s
275
250
217˚C
225
Temperature (˚C)
Ramp-up
3˚C/sec max.
200
60-150s
175
150
125
Rampdown
6˚C/sec
max.
100
75
Preheat 60-180s
50
25
480s max
0
50
100
150
200
Time (sec)
12
03/07/2017 V13.0
DOMINANT
TM
AlInGaP : DWx-MJS
Opto Technologies
Innovating Illumination
Appendix
1)
Brightness:
1.1
Luminous intensity is measured with an internal reproducibility of ± 8 % and an expanded uncertainty of
± 11 % (according to GUM with a coverage factor of k=3).
1.2
Luminous flux is measured with an internal reproducibility of ± 8 % and an expanded uncertainty of ± 11 %
(according to GUM with a coverage factor of k=3).
2)
Color:
2.1
Chromaticity coordinate groups are measured with an internal reproducibility of ± 0.005 and an expanded
uncertainty of ± 0.01 (accordingly to GUM with a coverage factor of k=3).
2.2
DOMINANT wavelength is measured with an internal reproducibility of ± 0.5nm and an expanded uncertainty
of ± 1nm (accordingly to GUM with a coverage factor of k=3).
3)
Voltage:
3.1
Forward Voltage, Vf is measured with an internal reproducibility of ± 0.05V and an expanded uncertainty of
± 0.1V (accordingly to GUM with a coverage factor of k=3).
4)
Corrosion Robustness:
4.1
Test conditions: 40 °C / 90 % rh / 15 ppm H2S / 336 h.
= Stricter than IEC 60068-2-43 (H2S) [25 °C / 75% rh / 10 ppm H2S / 21 days].
13
03/07/2017 V13.0
DOMINANT
TM
AlInGaP : DWx-MJS
Opto Technologies
Innovating Illumination
Revision History
Page
Subjects
Date of Modification
2, 5
Update Vf max value
Update Graph: Relative Luminous Intensity
Vs Forward Current
29 Dec 2011
2
Add new partno: DWO-MJS-XY2-1
07 Sep 2012
1
Update Product Photo
06 Aug 2013
5
Amend Graph : Forward Current Vs Forward Voltage
27 Dec 2013
3
Update Temperature Coefficient of IV in Characteristics
26 Jun 2014
1, 5, 6, 7, 11, 13
Update Features
Update Graph
Add Notes in Package Outline
Update Packaging Specification
Add Appendix
04 Nov 2016
4
Typo Error on Vf Binning Naming
03 Jul 2017
NOTE
All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT
Opto Technologies does not assume any liability arising out of the application or use of any product described herein.
DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function
or design.
DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems
without the express written approval from the Managing Director of DOMINANT Opto Technologies.
14
03/07/2017 V13.0
DOMINANT
TM
Opto Technologies
AlInGaP : DWx-MJS
Innovating Illumination
About Us
DOMINANT Opto Technologies is a dynamic company that is amongst the world’s leading automotive LED manufacturers. With an extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art
manufacturing and development capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies, a ISO/TS 16949 and ISO 14001 certified company, can be found
under http://www.dominant-semi.com.
Please contact us for more information:
DOMINANT Opto Technologies Sdn. Bhd.
Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia
Tel: (606) 283 3566 Fax: (606) 283 0566
E-mail: [email protected]
Similar pages