Power line chokes Current-compensated ring core triple chokes 600 / 350 V AC, 0.57 … 2.2 mH, 16 … 35 A / +70 °C Series/Type: B82747E6 Date: May 2015 a~í~=pÜÉÉí EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. Power line chokes B82747E6 Current-compensated ring core triple chokes Rated voltage 600 / 350 V AC Rated inductance 0.57 ... 2.2 mH Rated current 16 ... 35 A / +70 °C Construction ■ ■ ■ ■ ■ ■ Current-compensated ring core double choke Ferrite core Plastic core case incl. spacer (UL 94 V-0, CTI600) Plastic base plate (UL 94 V-0) Sector winding Clearance distance t5.5 mm, creepage distance t6.3 mm Features ■ Insulation for high voltage applications ■ Approx. 0.6% stray inductance for ■ ■ ■ ■ ■ ■ symmetrical interference suppression High rated current and rated temperature Suitable for wave soldering Design complies with EN 60938-2 (VDE 0565-2) UL 1446 class 155 (F) electrical insulation system Recyclable owing to omission of adhesives RoHS-compatible Applications ■ ■ ■ ■ Suppression of common-mode interferences High-voltage switch-mode power applications Solar power inverters Frequency converters Terminals ■ Ends of winding wires ■ Hot-dip tinned Marking Product brand, electrical insulation system designation, ordering code, rated voltages, rated inductance, rated current, date of manufacture (YYWWD.internal ID code), production place identification code Delivery mode ■ Cardboard box Please read Cautions and warnings and Important notes at the end of this document. 2 05/15 Power line chokes B82747E6 Current-compensated ring core triple chokes Dimensional drawings and pin configurations Please read Cautions and warnings and Important notes at the end of this document. 3 05/15 Power line chokes B82747E6 Current-compensated ring core triple chokes Technical data and measuring conditions Rated voltage VR 600 / 350 V AC (50 / 60 Hz) Test voltage Vtest 2600 V DC, 2 s (line/line) Rated temperature TR +70 qC Rated current IR Referred to 50 Hz and rated temperature Rated inductance LR Measured with Agilent 4284A at 0.1 mA, +20 °C Measuring frequency: LR d 1 mH: fmeas= 100 kHz LR > 1 mH: fmeas= 10 kHz Inductance is specified per winding. Inductance tolerance 30/+50% at +20 °C Inductance decrease'L/L0 < 10% at DC magnetic bias with IR, +20 °C Stray inductance Lstray,typ Measured with Agilent 4284A at 5 mA, +20 °C, typical values Measuring frequency: LR d 1 mH: fmeas= 100 kHz LR > 1 mH: fmeas= 10 kHz DC resistance Rtyp Measured at +20 °C, typical values, specified per winding Solderability (lead-free) Sn96.5Ag3.0Cu0.5: +(245 r5) °C, (3 r0.3) s Wetting of soldering area t95% (to IEC 60068-2-20, test Ta) Resistance to soldering heat (wave soldering) +(260 r5) °C, (10 r1) s (to IEC 60068-2-20, test Tb) Climatic category 40/125/56 (to IEC 60068-1) Storage conditions (packaged) –25 °C … +40 °C, d75% RH Weight 205 ... 225 g Characteristics and ordering codes IR,+70 °C LR Lstray,typ Rtyp Wire Ø d r0.1 A mH PH m: mm 16 2.2 11.5 6.0 1.8 B82747E6163A040 20 1.5 9.0 4.2 2.0 B82747E6203A040 25 1.0 5.5 2.8 2.24 B82747E6253A040 35 0.57 3.0 1.4 2.8 B82747E6353A040 Please read Cautions and warnings and Important notes at the end of this document. 4 05/15 Ordering code Power line chokes B82747E6 Current-compensated ring core triple chokes Current derating Iop/IR versus ambient temperature TA rated temperature TR = +70 °C Impedance |Z| versus frequency f measured with windings in parallel at +20 °C, typical values Please read Cautions and warnings and Important notes at the end of this document. 5 05/15 Cautions and warnings ■ Please note the recommendations in our Inductors data book (latest edition) and in the data sheets. – Particular attention should be paid to the derating curves given there. – The soldering conditions should also be observed. Temperatures quoted in relation to wave soldering refer to the pin, not the housing. ■ If the components are to be washed varnished it is necessary to check whether the washing varnish agent that is used has a negative effect on the wire insulation, any plastics that are used, or on glued joints. In particular, it is possible for washing varnish agent residues to have a negative effect in the long-term on wire insulation. Washing processes may damage the product due to the possible static or cyclic mechanical loads (e.g. ultrasonic cleaning). They may cause cracks to develop on the product and its parts, which might lead to reduced reliability or lifetime. ■ The following points must be observed if the components are potted in customer applications: – Many potting materials shrink as they harden. They therefore exert a pressure on the plastic housing or core. This pressure can have a deleterious effect on electrical properties, and in extreme cases can damage the core or plastic housing mechanically. – It is necessary to check whether the potting material used attacks or destroys the wire insulation, plastics or glue. – The effect of the potting material can change the high-frequency behaviour of the components. ■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to breakage of the core. ■ Even for customer-specific products, conclusive validation of the component in the circuit can only be carried out by the customer. Display of ordering codes for EPCOS products The ordering code for one and the same product can be represented differently in data sheets, data books, other publications and the website of EPCOS, or in order-related documents such as shipping notes, order confirmations and product labels. The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products. Detailed information can be found on the Internet under www.epcos.com/orderingcodes. Please read Cautions and warnings and Important notes at the end of this document. 6 05/15 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, Alu-X, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PQSine, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 7 05/15