11 November 2010 Specification for monolithic crystal filter: MQF 45.0-3000/30 1. General 1.1. Package: 1.2. 1.3. 1.4. 1.5. Type name: Number of poles: Operating temperature range: Storage temperature range: 2. Electric values 2.1. Nominal centre frequency fo: MQF 45.0-3000/30 6 -20°C to +70°C -40°C to +85°C 45.0 MHz 2.2. 2.2.1 2.2.2. 2.2.3. 2.2.4. Pass band Centre frequency fc: Bandwidth between 3 dB - frequencies: Ripple at fo 10 kHz Insertion loss: ( measured on smallest attenuation in pass band ) 2.2.5. Return loss at fo 10 kHz: 2.3. 45.0 MHz 1.2 kHz > fo 15 kHz < 1.5 dB < 4.0 dB > 11 dB Stop band 2.3.1. fo 50 kHz 2.3.2. fo 100 kHz……fo 1MHz ): > 63 dB > 85 dB except spurious 2.4. Terminating impedance R//C (input and output): 50 // 0 pF 3. Marking: Top view 1(IN) 3(OUT) IN OUT VECTRON YYWW MQF 45.0-3000/30 4. Environment conditions: Corresponding to Vectron standard CF001 5.) Reflow profile corresponding to IPC / JEDEC J-STD-020C tL temperature ( T ) tp critical zone Tp ramp-up TL ramp-up ramp down preheat ( ts ) Ts max Ts min time ( t ) t 25°C to peak Profile Feature Average ramp-up rate ( TL to Tp ) Average ramp-up rate ( Tsmax to TL ) Preheat: - Temperature Min Tsmin - Temperature Min Tsmax - Time ts ( Tsmin to Tsmax ) Pb-free assembly small body large body 3°C / second max. 3°C / second max. 150°C 200°C 60-180 seconds Time maintained above: - Temperature TL 217°C - Time tL 60-150 seconds Peak temperature Tp 260 +0/-6°C Time within 5°C of actual peak temperature Tp 10-30 seconds 20-40 seconds Ramp-down rate 6°C / second max. Time 25°C to peak temperature 8 minutes max. All temperatures refer to topside of the package, measured on body surface of the package 6. Taping Marking Marking Marking Marking Marking Marking Marking Marking Drawing out direction Maximum 600 pcs. / reel Tape dimension ( mm ) Trailer leader part ( 400mm min, ) carrier tape cover tape 160mm min. 240mm min. M arking M arking M arking M arking M arking M arking M arking 150mm min. M arking 200mm min. components placed M arking carrier tape M arking cover tape Drawing out direction ( leading direction ) Tape ( all dimensions in mm ) P2 P1 Po t E Do Bo W So F 44.0 ± 0.3 40.4 ± 0.1 4.0 ± 0.1 20.0 ± 0.1 20.2 ± 0.15 5.1 ± 0.1 13.2 ± 0.1 32.25 ± 0.1 0.4 ± 0.05 D1 W: So: Po: P1: F: Ko: Ao: Bo: t: Ao Ko W2 A ø 330 max. ø 21.8 ± 0.5 ø 100 min. 45.5 ± 0.25 49.5 ± 0.5 N A: C: N: W1: W2: C Reel ( all dimension in mm ) W1 _____________________________________________________________________________________ Edited by: date: ___________________________ name: ________________________________