Panasonic EEHZE1E221P Conductive polymer hybrid aluminum electrolytic capacitor Datasheet

Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
Surface Mount Type
Series :
ZE Type : V
High temperature Lead-Free reflow
Features
● Endurance: 2000 h at 145 °C (High temperature / Long life)
● Low ESR and high ripple current (85 % over, Lower ESR than current V-TP)
● High-withstand voltage (25 V.DC to 63 V.DC), Low LC (0.01 CV or 3 μA)
● Equivalent to conductive polymer type aluminum electrolytic capacitor
(There are little characteristics change by temperature and frequency)
available upon request. (08 mm and larger)
● Vibration-proof product is
● AEC-Q200 compliant
● RoHS directive compliant
Specifications
Size code
Category temp. range
Rated voltage range
Nominal cap.range
Capacitance tolerance
DC leakage current
Dissipation factor (tan d)
Endurance 1
Endurance 2
Shelf life
Damp heat (Load)
Resistance to
soldering heat
F
G
–55 °C to +145 °C
25 V.DC to 63 V.DC
33 μF to 220 μF
56 μF to 330 μF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (μA) After 2 minutes (whichever is greater)
Please see the attached standard products list
145 °C, 2000 h, apply the rated ripple current without exceeding the rated voltage
Capacitance change Within ±30% of the initial value
tan d
< 200 % of the initial limit
E. S. R.
< 200 % of the initial limit
DC leakage current Within the initial limit
135 °C, 4000 h, apply the rated ripple current without exceeding the rated voltage
Capacitance change Within ±30% of the initial value
tan d
< 200 % of the initial limit
E. S. R.
< 200 % of the initial limit
DC leakage current Within the initial limit
After storage for 1000 hours at +145 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits specified in Endurance. (With voltage treatment)
85 °C, 85 % to 90 %, 2000 h, rated voltage applied
Capacitance change Within ±30% of the initial value
tan d
< 200 % of the initial limit
E. S. R.
< 200 % of the initial limit
DC leakage current Within the initial limit
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change Within ±10% of the initial value
tan d
Within the initial limit
DC leakage current Within the initial limit
Series identification
L
Pressure relief (010 and larger)
(P)
Capacitance (μF)
+
W
(I)
0D±0.5
Negative polarity marking (–)
220
E ZE
A±0.2
–
(I)
0.3 max.
Marking color : BLACK
H
Example : 25 V.DC 220 μF
K
Dimensions (not to scale)
B±0.2
Marking
( ) Reference size
(Unit : mm)
Rated voltage mark
Size
code
Lot number
Rated voltage mark
E
V
25 V.DC
35 V.DC
H
J
50 V.DC
63 V.DC
F
G
D
L
A, B
H
I
W
P
8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1
10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6
K
0.70±0.2
0.70±0.2
· The dimensions of the vibration-proof products, please refer to the page of
the mounting specification.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
00
Mar. 2017
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
Standard products
Endurance 1 : 145 °C 2000 h
Endurance 2 : 135 °C 4000 h
CapaciRated
tance
voltage
(±20 %)
(V.DC)
(μF)
25
35
50
63
220
330
150
270
68
100
33
56
Case size
(mm)
fD
L
8
10
8
10
8
10
8
10
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2
Specification
Size
code
F
G
F
G
F
G
F
G
Ripple current
ESR
(100 kHz)
tand
(100 kHz)
(mA r.m.s.)
(120 Hz)
(+20 °C)
Endurance 1 Endurance 2 (mΩ) (+20 °C)
(+145 °C) (+135 °C)
700
1600
27
0.14
900
2000
20
0.14
700
1600
27
0.12
900
2000
20
0.12
600
1250
30
0.10
800
1600
28
0.10
600
1100
40
0.08
800
1400
30
0.08
Min.
packaging q'ty
Part number
Standard
Product
Vibration-proof
product
Taping
(pcs)
EEHZE1E221P
EEHZE1E331P
EEHZE1V151P
EEHZE1V271P
EEHZE1H680P
EEHZE1H101P
EEHZE1J330P
EEHZE1J560P
EEHZE1E221V
EEHZE1E331V
EEHZE1V151V
EEHZE1V271V
EEHZE1H680V
EEHZE1H101V
EEHZE1J330V
EEHZE1J560V
500
500
500
500
500
500
500
500
· Please refer to the page of “Reflow profile” and “The taping dimensions”.
Frequency correction factor for ripple current
Rated capacitance
C < 47 μF
47 μF < C < 150 μF
150 μF < C
Frequency
Rated capacitance
C < 47 μF
47 μF < C < 150 μF
150 μF < C
Frequency
Rated capacitance
C < 47 μF
47 μF < C < 150 μF
150 μF < C
Frequency
Rated capacitance
C < 47 μF
47 μF < C < 150 μF
150 μF < C
Frequency
Correction
factor
Correction
factor
Correction
factor
Correction
factor
100 Hz < f < 200 Hz 200 Hz < f < 300 Hz 300 Hz < f < 500 Hz
0.10
0.10
0.15
0.15
0.20
0.25
0.15
0.25
0.25
1 kHz < f < 2 kHz
0.30
0.40
0.45
10 kHz < f < 15 kHz
0.60
0.70
0.75
2 kHz < f < 3 kHz
0.40
0.45
0.50
3 kHz < f < 5 kHz
0.45
0.55
0.60
500 Hz < f < 1 kHz
0.20
0.30
0.30
5 kHz < f < 10 kHz
0.50
0.60
0.65
15 kHz < f < 20 kHz 20 kHz < f < 30 kHz 30 kHz < f < 40 kHz
0.65
0.70
0.75
0.75
0.80
0.80
0.80
0.85
0.85
40 kHz < f < 50 kHz 50 kHz < f < 100 kHz 100 kHz < f < 500 kHz
0.80
0.85
1.00
0.85
0.90
1.00
0.85
0.90
1.00
500 kHz < f
1.05
1.00
1.00
After endurance ESR (100 kHz, –40 °C)
Size
ESR (Ω)
f8×10.2
0.4
f10×10.2
0.3
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
00
Mar. 2017
Similar pages